提交 04b07d29 编写于 作者: R Richard Henderson 提交者: Peter Maydell

target/arm: Implement ATS1E1 system registers

This is a minor enhancement over ARMv8.1-PAN.
The *_PAN mmu_idx are used with the existing do_ats_write.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20200208125816.14954-16-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
上级 4a2696c0
......@@ -3409,16 +3409,21 @@ static void ats_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
switch (ri->opc2 & 6) {
case 0:
/* stage 1 current state PL1: ATS1CPR, ATS1CPW */
/* stage 1 current state PL1: ATS1CPR, ATS1CPW, ATS1CPRP, ATS1CPWP */
switch (el) {
case 3:
mmu_idx = ARMMMUIdx_SE3;
break;
case 2:
mmu_idx = ARMMMUIdx_Stage1_E1;
break;
g_assert(!secure); /* TODO: ARMv8.4-SecEL2 */
/* fall through */
case 1:
mmu_idx = secure ? ARMMMUIdx_SE10_1 : ARMMMUIdx_Stage1_E1;
if (ri->crm == 9 && (env->uncached_cpsr & CPSR_PAN)) {
mmu_idx = (secure ? ARMMMUIdx_SE10_1_PAN
: ARMMMUIdx_Stage1_E1_PAN);
} else {
mmu_idx = secure ? ARMMMUIdx_SE10_1 : ARMMMUIdx_Stage1_E1;
}
break;
default:
g_assert_not_reached();
......@@ -3487,8 +3492,13 @@ static void ats_write64(CPUARMState *env, const ARMCPRegInfo *ri,
switch (ri->opc2 & 6) {
case 0:
switch (ri->opc1) {
case 0: /* AT S1E1R, AT S1E1W */
mmu_idx = secure ? ARMMMUIdx_SE10_1 : ARMMMUIdx_Stage1_E1;
case 0: /* AT S1E1R, AT S1E1W, AT S1E1RP, AT S1E1WP */
if (ri->crm == 9 && (env->pstate & PSTATE_PAN)) {
mmu_idx = (secure ? ARMMMUIdx_SE10_1_PAN
: ARMMMUIdx_Stage1_E1_PAN);
} else {
mmu_idx = secure ? ARMMMUIdx_SE10_1 : ARMMMUIdx_Stage1_E1;
}
break;
case 4: /* AT S1E2R, AT S1E2W */
mmu_idx = ARMMMUIdx_E2;
......@@ -6683,6 +6693,32 @@ static const ARMCPRegInfo vhe_reginfo[] = {
REGINFO_SENTINEL
};
#ifndef CONFIG_USER_ONLY
static const ARMCPRegInfo ats1e1_reginfo[] = {
{ .name = "AT_S1E1R", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 0, .crn = 7, .crm = 9, .opc2 = 0,
.access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC,
.writefn = ats_write64 },
{ .name = "AT_S1E1W", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 0, .crn = 7, .crm = 9, .opc2 = 1,
.access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC,
.writefn = ats_write64 },
REGINFO_SENTINEL
};
static const ARMCPRegInfo ats1cp_reginfo[] = {
{ .name = "ATS1CPRP",
.cp = 15, .opc1 = 0, .crn = 7, .crm = 9, .opc2 = 0,
.access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC,
.writefn = ats_write },
{ .name = "ATS1CPWP",
.cp = 15, .opc1 = 0, .crn = 7, .crm = 9, .opc2 = 1,
.access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC,
.writefn = ats_write },
REGINFO_SENTINEL
};
#endif
void register_cp_regs_for_features(ARMCPU *cpu)
{
/* Register all the coprocessor registers based on feature bits */
......@@ -7620,6 +7656,14 @@ void register_cp_regs_for_features(ARMCPU *cpu)
if (cpu_isar_feature(aa64_pan, cpu)) {
define_one_arm_cp_reg(cpu, &pan_reginfo);
}
#ifndef CONFIG_USER_ONLY
if (cpu_isar_feature(aa64_ats1e1, cpu)) {
define_arm_cp_regs(cpu, ats1e1_reginfo);
}
if (cpu_isar_feature(aa32_ats1e1, cpu)) {
define_arm_cp_regs(cpu, ats1cp_reginfo);
}
#endif
if (arm_feature(env, ARM_FEATURE_EL2) && cpu_isar_feature(aa64_vh, cpu)) {
define_arm_cp_regs(cpu, vhe_reginfo);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册