vt82c686.c 14.1 KB
Newer Older
1 2 3 4 5 6 7
/*
 * VT82C686B south bridge support
 *
 * Copyright (c) 2008 yajin (yajin@vm-kernel.org)
 * Copyright (c) 2009 chenming (chenming@rdc.faw.com.cn)
 * Copyright (c) 2010 Huacai Chen (zltjiangshi@gmail.com)
 * This code is licensed under the GNU GPL v2.
8 9 10
 *
 * Contributions after 2012-01-13 are licensed under the terms of the
 * GNU GPL, version 2 or (at your option) any later version.
11 12
 */

13
#include "hw/hw.h"
P
Paolo Bonzini 已提交
14 15 16 17
#include "hw/i386/pc.h"
#include "hw/isa/vt82c686.h"
#include "hw/i2c/i2c.h"
#include "hw/i2c/smbus.h"
18
#include "hw/pci/pci.h"
P
Paolo Bonzini 已提交
19
#include "hw/isa/isa.h"
20
#include "hw/sysbus.h"
P
Paolo Bonzini 已提交
21 22 23 24
#include "hw/mips/mips.h"
#include "hw/isa/apm.h"
#include "hw/acpi/acpi.h"
#include "hw/i2c/pm_smbus.h"
25
#include "sysemu/sysemu.h"
26
#include "qemu/timer.h"
27
#include "exec/address-spaces.h"
28 29 30 31 32 33 34 35 36 37 38

//#define DEBUG_VT82C686B

#ifdef DEBUG_VT82C686B
#define DPRINTF(fmt, ...) fprintf(stderr, "%s: " fmt, __FUNCTION__, ##__VA_ARGS__)
#else
#define DPRINTF(fmt, ...)
#endif

typedef struct SuperIOConfig
{
39
    uint8_t config[0x100];
40 41 42 43 44 45
    uint8_t index;
    uint8_t data;
} SuperIOConfig;

typedef struct VT82C686BState {
    PCIDevice dev;
J
Jan Kiszka 已提交
46
    MemoryRegion superio;
47 48 49
    SuperIOConfig superio_conf;
} VT82C686BState;

J
Jan Kiszka 已提交
50 51
static void superio_ioport_writeb(void *opaque, hwaddr addr, uint64_t data,
                                  unsigned size)
52 53 54
{
    SuperIOConfig *superio_conf = opaque;

55
    DPRINTF("superio_ioport_writeb  address 0x%x  val 0x%x\n", addr, data);
56 57 58
    if (addr == 0x3f0) {
        superio_conf->index = data & 0xff;
    } else {
59
        bool can_write = true;
60 61 62 63 64 65 66 67 68 69 70
        /* 0x3f1 */
        switch (superio_conf->index) {
        case 0x00 ... 0xdf:
        case 0xe4:
        case 0xe5:
        case 0xe9 ... 0xed:
        case 0xf3:
        case 0xf5:
        case 0xf7:
        case 0xf9 ... 0xfb:
        case 0xfd ... 0xff:
71 72 73 74 75 76 77 78 79 80 81 82 83
            can_write = false;
            break;
        case 0xe7:
            if ((data & 0xff) != 0xfe) {
                DPRINTF("change uart 1 base. unsupported yet\n");
                can_write = false;
            }
            break;
        case 0xe8:
            if ((data & 0xff) != 0xbe) {
                DPRINTF("change uart 2 base. unsupported yet\n");
                can_write = false;
            }
84 85
            break;
        default:
86
            break;
87 88

        }
89 90 91
        if (can_write) {
            superio_conf->config[superio_conf->index] = data & 0xff;
        }
92 93 94
    }
}

J
Jan Kiszka 已提交
95
static uint64_t superio_ioport_readb(void *opaque, hwaddr addr, unsigned size)
96 97 98
{
    SuperIOConfig *superio_conf = opaque;

99
    DPRINTF("superio_ioport_readb  address 0x%x\n", addr);
100 101 102
    return (superio_conf->config[superio_conf->index]);
}

J
Jan Kiszka 已提交
103 104 105 106 107 108 109 110 111 112
static const MemoryRegionOps superio_ops = {
    .read = superio_ioport_readb,
    .write = superio_ioport_writeb,
    .endianness = DEVICE_NATIVE_ENDIAN,
    .impl = {
        .min_access_size = 1,
        .max_access_size = 1,
    },
};

113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146
static void vt82c686b_reset(void * opaque)
{
    PCIDevice *d = opaque;
    uint8_t *pci_conf = d->config;
    VT82C686BState *vt82c = DO_UPCAST(VT82C686BState, dev, d);

    pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
    pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
                 PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL);
    pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM);

    pci_conf[0x48] = 0x01; /* Miscellaneous Control 3 */
    pci_conf[0x4a] = 0x04; /* IDE interrupt Routing */
    pci_conf[0x4f] = 0x03; /* DMA/Master Mem Access Control 3 */
    pci_conf[0x50] = 0x2d; /* PnP DMA Request Control */
    pci_conf[0x59] = 0x04;
    pci_conf[0x5a] = 0x04; /* KBC/RTC Control*/
    pci_conf[0x5f] = 0x04;
    pci_conf[0x77] = 0x10; /* GPIO Control 1/2/3/4 */

    vt82c->superio_conf.config[0xe0] = 0x3c;
    vt82c->superio_conf.config[0xe2] = 0x03;
    vt82c->superio_conf.config[0xe3] = 0xfc;
    vt82c->superio_conf.config[0xe6] = 0xde;
    vt82c->superio_conf.config[0xe7] = 0xfe;
    vt82c->superio_conf.config[0xe8] = 0xbe;
}

/* write config pci function0 registers. PCI-ISA bridge */
static void vt82c686b_write_config(PCIDevice * d, uint32_t address,
                                   uint32_t val, int len)
{
    VT82C686BState *vt686 = DO_UPCAST(VT82C686BState, dev, d);

147
    DPRINTF("vt82c686b_write_config  address 0x%x  val 0x%x len 0x%x\n",
148 149 150 151
           address, val, len);

    pci_default_write_config(d, address, val, len);
    if (address == 0x85) {  /* enable or disable super IO configure */
J
Jan Kiszka 已提交
152
        memory_region_set_enabled(&vt686->superio, val & 0x2);
153 154 155 156 157 158 159
    }
}

#define ACPI_DBG_IO_ADDR  0xb044

typedef struct VT686PMState {
    PCIDevice dev;
160
    MemoryRegion io;
G
Gerd Hoffmann 已提交
161
    ACPIREGS ar;
162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178
    APMState apm;
    PMSMBus smb;
    uint32_t smb_io_base;
} VT686PMState;

typedef struct VT686AC97State {
    PCIDevice dev;
} VT686AC97State;

typedef struct VT686MC97State {
    PCIDevice dev;
} VT686MC97State;

static void pm_update_sci(VT686PMState *s)
{
    int sci_level, pmsts;

179
    pmsts = acpi_pm1_evt_get_sts(&s->ar);
G
Gerd Hoffmann 已提交
180
    sci_level = (((pmsts & s->ar.pm1.evt.en) &
181 182 183 184
                  (ACPI_BITMASK_RT_CLOCK_ENABLE |
                   ACPI_BITMASK_POWER_BUTTON_ENABLE |
                   ACPI_BITMASK_GLOBAL_LOCK_ENABLE |
                   ACPI_BITMASK_TIMER_ENABLE)) != 0);
185
    pci_set_irq(&s->dev, sci_level);
186
    /* schedule a timer interruption if needed */
G
Gerd Hoffmann 已提交
187
    acpi_pm_tmr_update(&s->ar, (s->ar.pm1.evt.en & ACPI_BITMASK_TIMER_ENABLE) &&
188
                       !(pmsts & ACPI_BITMASK_TIMER_STATUS));
189 190
}

G
Gerd Hoffmann 已提交
191
static void pm_tmr_timer(ACPIREGS *ar)
192
{
G
Gerd Hoffmann 已提交
193
    VT686PMState *s = container_of(ar, VT686PMState, ar);
194 195 196 197 198 199 200
    pm_update_sci(s);
}

static void pm_io_space_update(VT686PMState *s)
{
    uint32_t pm_io_base;

201 202
    pm_io_base = pci_get_long(s->dev.config + 0x40);
    pm_io_base &= 0xffc0;
203

204 205 206 207
    memory_region_transaction_begin();
    memory_region_set_enabled(&s->io, s->dev.config[0x80] & 1);
    memory_region_set_address(&s->io, pm_io_base);
    memory_region_transaction_commit();
208 209 210 211 212
}

static void pm_write_config(PCIDevice *d,
                            uint32_t address, uint32_t val, int len)
{
213
    DPRINTF("pm_write_config  address 0x%x  val 0x%x len 0x%x\n",
214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230
           address, val, len);
    pci_default_write_config(d, address, val, len);
}

static int vmstate_acpi_post_load(void *opaque, int version_id)
{
    VT686PMState *s = opaque;

    pm_io_space_update(s);
    return 0;
}

static const VMStateDescription vmstate_acpi = {
    .name = "vt82c686b_pm",
    .version_id = 1,
    .minimum_version_id = 1,
    .post_load = vmstate_acpi_post_load,
231
    .fields = (VMStateField[]) {
232
        VMSTATE_PCI_DEVICE(dev, VT686PMState),
G
Gerd Hoffmann 已提交
233 234 235
        VMSTATE_UINT16(ar.pm1.evt.sts, VT686PMState),
        VMSTATE_UINT16(ar.pm1.evt.en, VT686PMState),
        VMSTATE_UINT16(ar.pm1.cnt.cnt, VT686PMState),
236
        VMSTATE_STRUCT(apm, VT686PMState, 0, vmstate_apm, APMState),
G
Gerd Hoffmann 已提交
237 238
        VMSTATE_TIMER(ar.tmr.timer, VT686PMState),
        VMSTATE_INT64(ar.tmr.overflow_time, VT686PMState),
239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269
        VMSTATE_END_OF_LIST()
    }
};

/*
 * TODO: vt82c686b_ac97_init() and vt82c686b_mc97_init()
 * just register a PCI device now, functionalities will be implemented later.
 */

static int vt82c686b_ac97_initfn(PCIDevice *dev)
{
    VT686AC97State *s = DO_UPCAST(VT686AC97State, dev, dev);
    uint8_t *pci_conf = s->dev.config;

    pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_INVALIDATE |
                 PCI_COMMAND_PARITY);
    pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_CAP_LIST |
                 PCI_STATUS_DEVSEL_MEDIUM);
    pci_set_long(pci_conf + PCI_INTERRUPT_PIN, 0x03);

    return 0;
}

void vt82c686b_ac97_init(PCIBus *bus, int devfn)
{
    PCIDevice *dev;

    dev = pci_create(bus, devfn, "VT82C686B_AC97");
    qdev_init_nofail(&dev->qdev);
}

270 271
static void via_ac97_class_init(ObjectClass *klass, void *data)
{
272
    DeviceClass *dc = DEVICE_CLASS(klass);
273 274 275 276 277 278 279
    PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);

    k->init = vt82c686b_ac97_initfn;
    k->vendor_id = PCI_VENDOR_ID_VIA;
    k->device_id = PCI_DEVICE_ID_VIA_AC97;
    k->revision = 0x50;
    k->class_id = PCI_CLASS_MULTIMEDIA_AUDIO;
280
    set_bit(DEVICE_CATEGORY_SOUND, dc->categories);
281
    dc->desc = "AC97";
282 283
}

284
static const TypeInfo via_ac97_info = {
285 286 287 288
    .name          = "VT82C686B_AC97",
    .parent        = TYPE_PCI_DEVICE,
    .instance_size = sizeof(VT686AC97State),
    .class_init    = via_ac97_class_init,
289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311
};

static int vt82c686b_mc97_initfn(PCIDevice *dev)
{
    VT686MC97State *s = DO_UPCAST(VT686MC97State, dev, dev);
    uint8_t *pci_conf = s->dev.config;

    pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_INVALIDATE |
                 PCI_COMMAND_VGA_PALETTE);
    pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM);
    pci_set_long(pci_conf + PCI_INTERRUPT_PIN, 0x03);

    return 0;
}

void vt82c686b_mc97_init(PCIBus *bus, int devfn)
{
    PCIDevice *dev;

    dev = pci_create(bus, devfn, "VT82C686B_MC97");
    qdev_init_nofail(&dev->qdev);
}

312 313
static void via_mc97_class_init(ObjectClass *klass, void *data)
{
314
    DeviceClass *dc = DEVICE_CLASS(klass);
315 316 317 318 319 320 321
    PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);

    k->init = vt82c686b_mc97_initfn;
    k->vendor_id = PCI_VENDOR_ID_VIA;
    k->device_id = PCI_DEVICE_ID_VIA_MC97;
    k->class_id = PCI_CLASS_COMMUNICATION_OTHER;
    k->revision = 0x30;
322
    set_bit(DEVICE_CATEGORY_NETWORK, dc->categories);
323
    dc->desc = "MC97";
324 325
}

326
static const TypeInfo via_mc97_info = {
327 328 329 330
    .name          = "VT82C686B_MC97",
    .parent        = TYPE_PCI_DEVICE,
    .instance_size = sizeof(VT686MC97State),
    .class_init    = via_mc97_class_init,
331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351
};

/* vt82c686 pm init */
static int vt82c686b_pm_initfn(PCIDevice *dev)
{
    VT686PMState *s = DO_UPCAST(VT686PMState, dev, dev);
    uint8_t *pci_conf;

    pci_conf = s->dev.config;
    pci_set_word(pci_conf + PCI_COMMAND, 0);
    pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_FAST_BACK |
                 PCI_STATUS_DEVSEL_MEDIUM);

    /* 0x48-0x4B is Power Management I/O Base */
    pci_set_long(pci_conf + 0x48, 0x00000001);

    /* SMB ports:0xeee0~0xeeef */
    s->smb_io_base =((s->smb_io_base & 0xfff0) + 0x0);
    pci_conf[0x90] = s->smb_io_base | 1;
    pci_conf[0x91] = s->smb_io_base >> 8;
    pci_conf[0xd2] = 0x90;
G
Gerd Hoffmann 已提交
352 353
    pm_smbus_init(&s->dev.qdev, &s->smb);
    memory_region_add_subregion(get_system_io(), s->smb_io_base, &s->smb.io);
354

J
Julien Grall 已提交
355
    apm_init(dev, &s->apm, NULL, s);
356

357
    memory_region_init(&s->io, OBJECT(dev), "vt82c686-pm", 64);
358 359
    memory_region_set_enabled(&s->io, false);
    memory_region_add_subregion(get_system_io(), 0, &s->io);
360

G
Gerd Hoffmann 已提交
361
    acpi_pm_tmr_init(&s->ar, pm_tmr_timer, &s->io);
G
Gerd Hoffmann 已提交
362
    acpi_pm1_evt_init(&s->ar, pm_tmr_timer, &s->io);
363
    acpi_pm1_cnt_init(&s->ar, &s->io, 2);
364 365 366 367

    return 0;
}

A
Andreas Färber 已提交
368 369
I2CBus *vt82c686b_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
                          qemu_irq sci_irq)
370 371 372 373 374 375 376 377 378 379 380 381 382 383
{
    PCIDevice *dev;
    VT686PMState *s;

    dev = pci_create(bus, devfn, "VT82C686B_PM");
    qdev_prop_set_uint32(&dev->qdev, "smb_io_base", smb_io_base);

    s = DO_UPCAST(VT686PMState, dev, dev);

    qdev_init_nofail(&dev->qdev);

    return s->smb.smbus;
}

384 385 386 387 388 389 390
static Property via_pm_properties[] = {
    DEFINE_PROP_UINT32("smb_io_base", VT686PMState, smb_io_base, 0),
    DEFINE_PROP_END_OF_LIST(),
};

static void via_pm_class_init(ObjectClass *klass, void *data)
{
391
    DeviceClass *dc = DEVICE_CLASS(klass);
392 393 394 395 396 397 398 399
    PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);

    k->init = vt82c686b_pm_initfn;
    k->config_write = pm_write_config;
    k->vendor_id = PCI_VENDOR_ID_VIA;
    k->device_id = PCI_DEVICE_ID_VIA_ACPI;
    k->class_id = PCI_CLASS_BRIDGE_OTHER;
    k->revision = 0x40;
400 401
    dc->desc = "PM";
    dc->vmsd = &vmstate_acpi;
402
    set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
403
    dc->props = via_pm_properties;
404 405
}

406
static const TypeInfo via_pm_info = {
407 408 409 410
    .name          = "VT82C686B_PM",
    .parent        = TYPE_PCI_DEVICE,
    .instance_size = sizeof(VT686PMState),
    .class_init    = via_pm_class_init,
411 412 413 414 415 416
};

static const VMStateDescription vmstate_via = {
    .name = "vt82c686b",
    .version_id = 1,
    .minimum_version_id = 1,
417
    .fields = (VMStateField[]) {
418 419 420 421 422 423 424 425
        VMSTATE_PCI_DEVICE(dev, VT82C686BState),
        VMSTATE_END_OF_LIST()
    }
};

/* init the PCI-to-ISA bridge */
static int vt82c686b_initfn(PCIDevice *d)
{
J
Jan Kiszka 已提交
426
    VT82C686BState *vt82c = DO_UPCAST(VT82C686BState, dev, d);
427
    uint8_t *pci_conf;
J
Jan Kiszka 已提交
428
    ISABus *isa_bus;
429 430 431
    uint8_t *wmask;
    int i;

J
Jan Kiszka 已提交
432
    isa_bus = isa_bus_new(&d->qdev, pci_address_space_io(d));
433 434 435 436 437 438 439 440 441 442 443

    pci_conf = d->config;
    pci_config_set_prog_interface(pci_conf, 0x0);

    wmask = d->wmask;
    for (i = 0x00; i < 0xff; i++) {
       if (i<=0x03 || (i>=0x08 && i<=0x3f)) {
           wmask[i] = 0x00;
       }
    }

444
    memory_region_init_io(&vt82c->superio, OBJECT(d), &superio_ops,
445
                          &vt82c->superio_conf, "superio", 2);
J
Jan Kiszka 已提交
446 447 448 449 450 451
    memory_region_set_enabled(&vt82c->superio, false);
    /* The floppy also uses 0x3f0 and 0x3f1.
     * But we do not emulate a floppy, so just set it here. */
    memory_region_add_subregion(isa_bus->address_space_io, 0x3f0,
                                &vt82c->superio);

452 453 454 455 456
    qemu_register_reset(vt82c686b_reset, d);

    return 0;
}

457
ISABus *vt82c686b_init(PCIBus *bus, int devfn)
458 459 460
{
    PCIDevice *d;

461
    d = pci_create_simple_multifunction(bus, devfn, true, "VT82C686B");
462

A
Andreas Färber 已提交
463
    return ISA_BUS(qdev_get_child_bus(DEVICE(d), "isa.0"));
464 465
}

466 467
static void via_class_init(ObjectClass *klass, void *data)
{
468
    DeviceClass *dc = DEVICE_CLASS(klass);
469 470 471 472 473 474 475 476
    PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);

    k->init = vt82c686b_initfn;
    k->config_write = vt82c686b_write_config;
    k->vendor_id = PCI_VENDOR_ID_VIA;
    k->device_id = PCI_DEVICE_ID_VIA_ISA_BRIDGE;
    k->class_id = PCI_CLASS_BRIDGE_ISA;
    k->revision = 0x40;
477 478
    dc->desc = "ISA bridge";
    dc->vmsd = &vmstate_via;
479 480 481 482 483
    /*
     * Reason: part of VIA VT82C686 southbridge, needs to be wired up,
     * e.g. by mips_fulong2e_init()
     */
    dc->cannot_instantiate_with_device_add_yet = true;
484 485
}

486
static const TypeInfo via_info = {
487 488 489 490
    .name          = "VT82C686B",
    .parent        = TYPE_PCI_DEVICE,
    .instance_size = sizeof(VT82C686BState),
    .class_init    = via_class_init,
491 492
};

A
Andreas Färber 已提交
493
static void vt82c686b_register_types(void)
494
{
A
Andreas Färber 已提交
495 496 497
    type_register_static(&via_ac97_info);
    type_register_static(&via_mc97_info);
    type_register_static(&via_pm_info);
498
    type_register_static(&via_info);
499
}
A
Andreas Färber 已提交
500 501

type_init(vt82c686b_register_types)