q800.c

/*
 * QEMU Motorla 680x0 Macintosh hardware System Emulator
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */

#include "qemu/osdep.h"
#include "qemu/units.h"
#include "qemu-common.h"
#include "sysemu/sysemu.h"
#include "cpu.h"
#include "hw/hw.h"
#include "hw/boards.h"
#include "hw/irq.h"
#include "elf.h"
#include "hw/loader.h"
#include "ui/console.h"
#include "exec/address-spaces.h"
#include "hw/char/escc.h"
#include "hw/sysbus.h"
#include "hw/scsi/esp.h"
#include "bootinfo.h"
#include "hw/misc/mac_via.h"
#include "hw/input/adb.h"
#include "hw/nubus/mac-nubus-bridge.h"
#include "hw/display/macfb.h"
#include "hw/block/swim.h"
#include "net/net.h"
#include "qapi/error.h"
#include "sysemu/qtest.h"
#include "sysemu/runstate.h"
#include "sysemu/reset.h"

#define MACROM_ADDR     0x40000000
#define MACROM_SIZE     0x00100000

#define MACROM_FILENAME "MacROM.bin"

#define Q800_MACHINE_ID 35
#define Q800_CPU_ID (1 << 2)
#define Q800_FPU_ID (1 << 2)
#define Q800_MMU_ID (1 << 2)

#define MACH_MAC        3
#define Q800_MAC_CPU_ID 2

#define IO_BASE               0x50000000
#define IO_SLICE              0x00040000
#define IO_SIZE               0x04000000

#define VIA_BASE              (IO_BASE + 0x00000)
#define SONIC_PROM_BASE       (IO_BASE + 0x08000)
#define SONIC_BASE            (IO_BASE + 0x0a000)
#define SCC_BASE              (IO_BASE + 0x0c020)
#define ESP_BASE              (IO_BASE + 0x10000)
#define ESP_PDMA              (IO_BASE + 0x10100)
#define ASC_BASE              (IO_BASE + 0x14000)
#define SWIM_BASE             (IO_BASE + 0x1E000)

#define NUBUS_SUPER_SLOT_BASE 0x60000000
#define NUBUS_SLOT_BASE       0xf0000000

/*
 * the video base, whereas it a Nubus address,
 * is needed by the kernel to have early display and
 * thus provided by the bootloader
 */
#define VIDEO_BASE            0xf9001000

#define MAC_CLOCK  3686418

/*
 * The GLUE (General Logic Unit) is an Apple custom integrated circuit chip
 * that performs a variety of functions (RAM management, clock generation, ...).
 * The GLUE chip receives interrupt requests from various devices,
 * assign priority to each, and asserts one or more interrupt line to the
 * CPU.
 */

typedef struct {
    M68kCPU *cpu;
    uint8_t ipr;
} GLUEState;

static void GLUE_set_irq(void *opaque, int irq, int level)
{
    GLUEState *s = opaque;
    int i;

    if (level) {
        s->ipr |= 1 << irq;
    } else {
        s->ipr &= ~(1 << irq);
    }

    for (i = 7; i >= 0; i--) {
        if ((s->ipr >> i) & 1) {
            m68k_set_irq_level(s->cpu, i + 1, i + 25);
            return;
        }
    }
    m68k_set_irq_level(s->cpu, 0, 0);
}

static void main_cpu_reset(void *opaque)
{
    M68kCPU *cpu = opaque;
    CPUState *cs = CPU(cpu);

    cpu_reset(cs);
    cpu->env.aregs[7] = ldl_phys(cs->as, 0);
    cpu->env.pc = ldl_phys(cs->as, 4);
}

static void q800_init(MachineState *machine)
{
    M68kCPU *cpu = NULL;
    int linux_boot;
    int32_t kernel_size;
    uint64_t elf_entry;
    char *filename;
    int bios_size;
    ram_addr_t initrd_base;
    int32_t initrd_size;
    MemoryRegion *rom;
    MemoryRegion *ram;
    MemoryRegion *io;
    const int io_slice_nb = (IO_SIZE / IO_SLICE) - 1;
    int i;
    ram_addr_t ram_size = machine->ram_size;
    const char *kernel_filename = machine->kernel_filename;
    const char *initrd_filename = machine->initrd_filename;
    const char *kernel_cmdline = machine->kernel_cmdline;
    hwaddr parameters_base;
    CPUState *cs;
    DeviceState *dev;
    DeviceState *via_dev;
    SysBusESPState *sysbus_esp;
    ESPState *esp;
    SysBusDevice *sysbus;
    BusState *adb_bus;
    NubusBus *nubus;
    GLUEState *irq;
    qemu_irq *pic;

    linux_boot = (kernel_filename != NULL);

    if (ram_size > 1 * GiB) {
        error_report("Too much memory for this machine: %" PRId64 " MiB, "
                     "maximum 1024 MiB", ram_size / MiB);
        exit(1);
    }

    /* init CPUs */
    cpu = M68K_CPU(cpu_create(machine->cpu_type));
    qemu_register_reset(main_cpu_reset, cpu);

    /* RAM */
    ram = g_malloc(sizeof(*ram));
    memory_region_init_ram(ram, NULL, "m68k_mac.ram", ram_size, &error_abort);
    memory_region_add_subregion(get_system_memory(), 0, ram);

    /*
     * Memory from IO_BASE to IO_BASE + IO_SLICE is repeated
     * from IO_BASE + IO_SLICE to IO_BASE + IO_SIZE
     */
    io = g_new(MemoryRegion, io_slice_nb);
    for (i = 0; i < io_slice_nb; i++) {
        char *name = g_strdup_printf("mac_m68k.io[%d]", i + 1);

        memory_region_init_alias(&io[i], NULL, name, get_system_memory(),
                                 IO_BASE, IO_SLICE);
        memory_region_add_subregion(get_system_memory(),
                                    IO_BASE + (i + 1) * IO_SLICE, &io[i]);
        g_free(name);
    }

    /* IRQ Glue */

    irq = g_new0(GLUEState, 1);
    irq->cpu = cpu;
    pic = qemu_allocate_irqs(GLUE_set_irq, irq, 8);

    /* VIA */

    via_dev = qdev_create(NULL, TYPE_MAC_VIA);
    qdev_init_nofail(via_dev);
    sysbus = SYS_BUS_DEVICE(via_dev);
    sysbus_mmio_map(sysbus, 0, VIA_BASE);
    qdev_connect_gpio_out_named(DEVICE(sysbus), "irq", 0, pic[0]);
    qdev_connect_gpio_out_named(DEVICE(sysbus), "irq", 1, pic[1]);


    adb_bus = qdev_get_child_bus(via_dev, "adb.0");
    dev = qdev_create(adb_bus, TYPE_ADB_KEYBOARD);
    qdev_init_nofail(dev);
    dev = qdev_create(adb_bus, TYPE_ADB_MOUSE);
    qdev_init_nofail(dev);

    /* MACSONIC */

    if (nb_nics > 1) {
        error_report("q800 can only have one ethernet interface");
        exit(1);
    }

    qemu_check_nic_model(&nd_table[0], "dp83932");

    /*
     * MacSonic driver needs an Apple MAC address
     * Valid prefix are:
     * 00:05:02 Apple
     * 00:80:19 Dayna Communications, Inc.
     * 00:A0:40 Apple
     * 08:00:07 Apple
     * (Q800 use the last one)
     */
    nd_table[0].macaddr.a[0] = 0x08;
    nd_table[0].macaddr.a[1] = 0x00;
    nd_table[0].macaddr.a[2] = 0x07;

    dev = qdev_create(NULL, "dp8393x");
    qdev_set_nic_properties(dev, &nd_table[0]);
    qdev_prop_set_uint8(dev, "it_shift", 2);
    qdev_prop_set_bit(dev, "big_endian", true);
    object_property_set_link(OBJECT(dev), OBJECT(get_system_memory()),
                             "dma_mr", &error_abort);
    qdev_init_nofail(dev);
    sysbus = SYS_BUS_DEVICE(dev);
    sysbus_mmio_map(sysbus, 0, SONIC_BASE);
    sysbus_mmio_map(sysbus, 1, SONIC_PROM_BASE);
    sysbus_connect_irq(sysbus, 0, pic[2]);

    /* SCC */

    dev = qdev_create(NULL, TYPE_ESCC);
    qdev_prop_set_uint32(dev, "disabled", 0);
    qdev_prop_set_uint32(dev, "frequency", MAC_CLOCK);
    qdev_prop_set_uint32(dev, "it_shift", 1);
    qdev_prop_set_bit(dev, "bit_swap", true);
    qdev_prop_set_chr(dev, "chrA", serial_hd(0));
    qdev_prop_set_chr(dev, "chrB", serial_hd(1));
    qdev_prop_set_uint32(dev, "chnBtype", 0);
    qdev_prop_set_uint32(dev, "chnAtype", 0);
    qdev_init_nofail(dev);
    sysbus = SYS_BUS_DEVICE(dev);
    sysbus_connect_irq(sysbus, 0, pic[3]);
    sysbus_connect_irq(sysbus, 1, pic[3]);
    sysbus_mmio_map(sysbus, 0, SCC_BASE);

    /* SCSI */

    dev = qdev_create(NULL, TYPE_ESP);
    sysbus_esp = ESP_STATE(dev);
    esp = &sysbus_esp->esp;
    esp->dma_memory_read = NULL;
    esp->dma_memory_write = NULL;
    esp->dma_opaque = NULL;
    sysbus_esp->it_shift = 4;
    esp->dma_enabled = 1;
    qdev_init_nofail(dev);

    sysbus = SYS_BUS_DEVICE(dev);
    sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in_named(via_dev,
                                                         "via2-irq",
                                                         VIA2_IRQ_SCSI_BIT));
    sysbus_connect_irq(sysbus, 1,
                       qdev_get_gpio_in_named(via_dev, "via2-irq",
                                              VIA2_IRQ_SCSI_DATA_BIT));
    sysbus_mmio_map(sysbus, 0, ESP_BASE);
    sysbus_mmio_map(sysbus, 1, ESP_PDMA);

    scsi_bus_legacy_handle_cmdline(&esp->bus);

    /* SWIM floppy controller */

    dev = qdev_create(NULL, TYPE_SWIM);
    qdev_init_nofail(dev);
    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, SWIM_BASE);

    /* NuBus */

    dev = qdev_create(NULL, TYPE_MAC_NUBUS_BRIDGE);
    qdev_init_nofail(dev);
    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, NUBUS_SUPER_SLOT_BASE);
    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 1, NUBUS_SLOT_BASE);

    nubus = MAC_NUBUS_BRIDGE(dev)->bus;

    /* framebuffer in nubus slot #9 */

    dev = qdev_create(BUS(nubus), TYPE_NUBUS_MACFB);
    qdev_prop_set_uint32(dev, "width", graphic_width);
    qdev_prop_set_uint32(dev, "height", graphic_height);
    qdev_prop_set_uint8(dev, "depth", graphic_depth);
    qdev_init_nofail(dev);

    cs = CPU(cpu);
    if (linux_boot) {
        uint64_t high;
        kernel_size = load_elf(kernel_filename, NULL, NULL, NULL,
                               &elf_entry, NULL, &high, 1,
                               EM_68K, 0, 0);
        if (kernel_size < 0) {
            error_report("could not load kernel '%s'", kernel_filename);
            exit(1);
        }
        stl_phys(cs->as, 4, elf_entry); /* reset initial PC */
        parameters_base = (high + 1) & ~1;

        BOOTINFO1(cs->as, parameters_base, BI_MACHTYPE, MACH_MAC);
        BOOTINFO1(cs->as, parameters_base, BI_FPUTYPE, Q800_FPU_ID);
        BOOTINFO1(cs->as, parameters_base, BI_MMUTYPE, Q800_MMU_ID);
        BOOTINFO1(cs->as, parameters_base, BI_CPUTYPE, Q800_CPU_ID);
        BOOTINFO1(cs->as, parameters_base, BI_MAC_CPUID, Q800_MAC_CPU_ID);
        BOOTINFO1(cs->as, parameters_base, BI_MAC_MODEL, Q800_MACHINE_ID);
        BOOTINFO1(cs->as, parameters_base,
                  BI_MAC_MEMSIZE, ram_size >> 20); /* in MB */
        BOOTINFO2(cs->as, parameters_base, BI_MEMCHUNK, 0, ram_size);
        BOOTINFO1(cs->as, parameters_base, BI_MAC_VADDR, VIDEO_BASE);
        BOOTINFO1(cs->as, parameters_base, BI_MAC_VDEPTH, graphic_depth);
        BOOTINFO1(cs->as, parameters_base, BI_MAC_VDIM,
                  (graphic_height << 16) | graphic_width);
        BOOTINFO1(cs->as, parameters_base, BI_MAC_VROW,
                  (graphic_width * graphic_depth + 7) / 8);
        BOOTINFO1(cs->as, parameters_base, BI_MAC_SCCBASE, SCC_BASE);

        if (kernel_cmdline) {
            BOOTINFOSTR(cs->as, parameters_base, BI_COMMAND_LINE,
                        kernel_cmdline);
        }

        /* load initrd */
        if (initrd_filename) {
            initrd_size = get_image_size(initrd_filename);
            if (initrd_size < 0) {
                error_report("could not load initial ram disk '%s'",
                             initrd_filename);
                exit(1);
            }

            initrd_base = (ram_size - initrd_size) & TARGET_PAGE_MASK;
            load_image_targphys(initrd_filename, initrd_base,
                                ram_size - initrd_base);
            BOOTINFO2(cs->as, parameters_base, BI_RAMDISK, initrd_base,
                      initrd_size);
        } else {
            initrd_base = 0;
            initrd_size = 0;
        }
        BOOTINFO0(cs->as, parameters_base, BI_LAST);
    } else {
        uint8_t *ptr;
        /* allocate and load BIOS */
        rom = g_malloc(sizeof(*rom));
        memory_region_init_ram(rom, NULL, "m68k_mac.rom", MACROM_SIZE,
                               &error_abort);
        if (bios_name == NULL) {
            bios_name = MACROM_FILENAME;
        }
        filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
        memory_region_set_readonly(rom, true);
        memory_region_add_subregion(get_system_memory(), MACROM_ADDR, rom);

        /* Load MacROM binary */
        if (filename) {
            bios_size = load_image_targphys(filename, MACROM_ADDR, MACROM_SIZE);
            g_free(filename);
        } else {
            bios_size = -1;
        }

        /* Remove qtest_enabled() check once firmware files are in the tree */
        if (!qtest_enabled()) {
            if (bios_size < 0 || bios_size > MACROM_SIZE) {
                error_report("could not load MacROM '%s'", bios_name);
                exit(1);
            }

            ptr = rom_ptr(MACROM_ADDR, MACROM_SIZE);
            stl_phys(cs->as, 0, ldl_p(ptr));    /* reset initial SP */
            stl_phys(cs->as, 4,
                     MACROM_ADDR + ldl_p(ptr + 4)); /* reset initial PC */
        }
    }
}

static void q800_machine_class_init(ObjectClass *oc, void *data)
{
    MachineClass *mc = MACHINE_CLASS(oc);
    mc->desc = "Macintosh Quadra 800";
    mc->init = q800_init;
    mc->default_cpu_type = M68K_CPU_TYPE_NAME("m68040");
    mc->max_cpus = 1;
    mc->is_default = 0;
    mc->block_default_type = IF_SCSI;
}

static const TypeInfo q800_machine_typeinfo = {
    .name       = MACHINE_TYPE_NAME("q800"),
    .parent     = TYPE_MACHINE,
    .class_init = q800_machine_class_init,
};

static void q800_machine_register_types(void)
{
    type_register_static(&q800_machine_typeinfo);
}

type_init(q800_machine_register_types)