* docs/news.xml: updated for the release
Signed-off-by: NDaniel Veillard <veillard@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Signed-off-by: NHan Han <hhan@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

This leaks the FD of BPF map which means it will not be freed.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Some were in the wrong section, some in the wrong version.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

libvirt currently always reports that USB is available as a bus subsystem
type when running "virsh domcapabilities". However, this is not always
true, for example the qemu-system-s390x binary normally never has support
for USB. Thus we should only report that USB is available if there is
also a USB host controller available where we can attach USB devices.
Reported-by: NSebastian Mitterle <smitterl@redhat.com>
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1759849Signed-off-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

When trying to specify an input device on s390x without bus like this:

 <input type='keyboard'/>

... then libvirt currently complains:

 error: unsupported configuration: USB is disabled for this domain,
 but USB devices are present in the domain XML

This is somewhat confusing since the user did not specify an USB
device here. Since USB is not available on s390x, we should default
to the "virtio" bus here instead.

Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1790189Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Historically there are two places where we format authentication and
encryption for a disk. The logich which formats it for backing files was
flawed though and didn't format it at all. This worked if the image
became a backing file through the means of a snapshot but not directly.

Force formatting of the source and encryption for any non-disk case to
fix the issue.

This caused problems in many places as we use the formatter to copy the
definition. Effectively any copy lost the secret definition.

https://bugzilla.redhat.com/show_bug.cgi?id=1789310
https://bugzilla.redhat.com/show_bug.cgi?id=1788898Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

The test data was used only in xml->argv testing but it will have some
interresting fallout soon.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

Try also the modern incarnation of the test.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

Add another disk to luks-disks-source-qcow2 case to cover a backing
chain with encrypted members.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

Commit v5.10.0-269-g62065a6c moved NUMA validation code to domain
definition time and appropriately adjusted affected test cases except
for hugepages-default-system-size. And since we don't mock
virGetSystemPageSizeKB in our tests, hugepages-default-system-size test
would fail on architectures (ppc64le) with default page size other than
4KiB.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

In v5.0.0-rc1~94 we switched from one huge switch() to an array
for translating error numbers into error messages. However, the
array is declared to have VIR_ERR_NUMBER_LAST items which makes
it impossible to spot this place by compile checking when adding
new error number.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Mention the knowledge base article which has tips how to fix the backing
chain to work with current libvirt.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

When debugging tests under GDB/valgrind there is a significant
delay each time an execve is done as they scan shared libraries
once again. For tests which use many mock libraries, we have
been invoking execve many times which makes the debug experience
horrible. This changes our framework to activate the full
set of mock libraries in one single execve.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Add documentation for additional reason why snapshot-revert might need
to be forced. This explains why restoring an inactive snapshot while
there is managed saved state is refused by default.
Signed-off-by: NMichael Weiser <michael.weiser@gmx.de>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Reformat explanations of the snapshot-revert force reasons in
preparation for more to be added. This is a simple reformat without any
wording changes.
Signed-off-by: NMichael Weiser <michael.weiser@gmx.de>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Internal snapshots of a non-running domain do not carry any memory state
and restoring such a snapshot will not replace existing saved memory
state. This allows a scenario, where a user first suspends a domain into
managedsave, restores a non-running snapshot and then resumes the domain
from managedsave. After that, the guest system will run with its
previous memory state atop a different disk state. The most obvious
possible fallout from this is extensive file system corruption. Swap
content and RAID bitmaps might also be off.

This has been discussed[1] and fixed[2] from the end-user perspective for
virt-manager.

This patch marks the restore operation as risky at the libvirt level,
requiring the user to remove the saved memory state first or force the
operation.

[1] https://www.redhat.com/archives/virt-tools-list/2019-November/msg00011.html
[2] https://www.redhat.com/archives/virt-tools-list/2019-December/msg00049.htmlSigned-off-by: NMichael Weiser <michael.weiser@gmx.de>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Trivially replace usages of qemu and lxc in the virsh manpage with their
more heavily used and (according to Wikipedia) correct upper-case
spellings QEMU and LXC.
Signed-off-by: NMichael Weiser <michael.weiser@gmx.de>
Suggested-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Commit v5.10.0-290-g3a4787a3 refactored qemuDomainGetHostdevPath to
return a single path rather than an array of paths. When the function is
called on a missing device, it will now return NULL in @path rather than
a NULL array with zero items and the callers need to be adapted
properly.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

--tls-destination would be just ignored unless --tls is not specified,
which is correct, but let's provide a bit of a guidance is a user
forgets to add --tls.

This is just a virsh-only check targeted to end users as we don't
currently have such checks at the API level for migration parameters
that depend on flags.

https://bugzilla.redhat.com/show_bug.cgi?id=1784345Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>

bhyveargv2xmlmock calls virBhyveCapsBuild which in turn
calls virCPUProbeHost, probing the real host CPU. This
causes a test failure if the host CPU happens to contain
the 'arch-capabilities' feature as it triggers a call
to virHostCPUGetMSR() which fails on FreeBSD.

Fortunately we already have convenient code for mocking
the host CPU probing.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

There is no need to require users to produce iSCSI disk source
following our ordering of children elements. In fact, we don't
even accept our own order in the schema :(.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NLaine Stump <laine@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

In v5.10.0-508-gfbf3f3d8, the 'error' label was removed from
bhyveParseBhyveCommandLine(), however the CONSUME_ARG() macro
still uses it. Fix the macro to return an error instead.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

src/qemu/qemu_domain_address.c:680:13: error: this statement may fall through [-Werror=implicit-fallthrough=]
             switch ((virDomainFSModel) dev->data.fs->model) {
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Fixes: f363af7e

Commit v5.10.0-522-g9000b2f2 was too aggressive and removed the
'error' label from prlsdkRemoveBootDevices() even though it's
used. Luckily, it's used only from one place and we have an
alternative for it that doesn't require the label.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The point of this function is to translate virDomainOsDefFirmware
enum to qemuFirmwareOSInterface enum. However, with my commit
v5.10.0-507-g8e1804f9 we are passing a variable type of
virDomainLoader enum. Make the function accept both enums and
make the enum members correspond to each other.

This fixes clang build.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Split the formatting by fsdriver type to allow adding a new type.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Split the switch by fsdriver type to allow adding a new one.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

This will be used by a future patch.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Wire up the allocation and disposal of private data.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Add an object to hold the private data and call the
allocation function if it's present in xmlopt.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

This will be needed in the future for allocating private data.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Remove the 'gluster' part and decouple the return from
the gluster_debug_level parsing to allow adding more options
to this section.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>