* configure.in docs/news.html.in libvirt.spec.in: describe new release
* po/*.po*: regenerate

HAL has been deprecated since F12 and RHEL-6, so if building on
these platforms, switch on the udev driver instead

* libvirt.spec.in: Activate udev on F12/RHEL6

* docs/formatdomain.html.in: document that vnet and vif are reserved
  names and will be ignored if manually specified.

* python/generator.py python/libvirt-override-api.xml
  python/libvirt-override.c: implement the bindings for
  virConnectListInterfaces() and virConnectListDefinedInterfaces()

* tools/virsh.pod: the man page was stating that most operations
  are asynchronous while in fact most of them are synchronous except
  domain shutdown, setvcpus and setmem.

* src/xen/xm_internal.c: the XM driver was not checking for previously
  defined UUID on new defines. Similar to virDomainObjIsDuplicate()
  behaviour.

For backward compatibility we used to add the tty path as
a tty attribute on console of type pty, duplicating the value
now found in source/@path, but the Relax-NG grammar wasn't
extended for this
    <console type='pty' tty='/dev/pts/8'>
      <source path='/dev/pts/8'/>
      <target port='0'/>
    </console>

* docs/schemas/domain.rng: allow an optional tty attribute
  containing a devicePath

Recent qemu releases require command option '-enable-qemu' in order
for the kvm functionality be activated. Libvirt needs to pass this flag
to qemu when starting a domain. Note that without the option,
even if both the kernel and qemu support KVM, KVM will not be activated
and VMs will be very slow.

* src/qemu/qemu_conf.h src/qemu/qemu_conf.c: parse the extra command
  line option from help and add it when running kvm
* tests/qemuhelptest.c: this modified the flags output for qemu-0.10.5
  and qemu-kvm-0.11.0-rc2 regression tests

* src/util/iptables.c: `--option !  this` is deprecated in favor of
  `! --option this` syntax, change the output command accordingly

Erroneously included the sysfs_path and parent_sysfs_path elements in
the node device xml, they were not supposed to show up there

* src/conf/node_device_conf.c: remove the output of the 2 fields

I realized that I inadvertently added a member to the def struct to
contain each device's sysfs path when there was an existing member in the
dev struct for "OS specific path to device metadat, eg sysfs"  Since the
udev backend needs to record the sysfs path while it's in the process of
creating the device, before the dev struct gets allocated, I chose to
remove the member from the dev struct.

* src/conf/node_device_conf.c src/conf/node_device_conf.h
  src/node_device/node_device_driver.c src/node_device/node_device_hal.c
  src/node_device/node_device_udev.c: remove devicePath from the
  structure and use def->sysfs_path instead

* src/node_device/node_device_driver.c: two places where not calling
  virReportOOMError after strdup failure

The qemudStartVMDaemon() and several functions it calls use
the QEMU monitor. The QEMU driver is locked while this function
is executing, so it is rquired to release the driver lock and
reacquire it either side of issuing a monitor command. It
failed todo so, leading to deadlock

* qemu/qemu_driver.c: Release driver when in qemudStartVMDaemon
  and things it calls

updated el.po es.po or.po pl.po ta.po te.po
ran make update-po

* configure.in: Fix typo in PCIACCESS_LIBS

Fixes http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=549949

VMware uses two MAC address prefixes: 00:0c:29 and 00:50:56. The 00:0c:29
prefix is used for ESX server generated addresses. The 00:50:56 prefix is
split into two parts. MAC addresses above 00:50:56:3f:ff:ff are generated
by a vCenter. The rest of the 00:50:56 prefix can be assigned manually.
Any MAC address within the 00:0c:29 and 00:50:56 prefix can be specified
in a domain XML config and the driver will handle the details internally.

* src/esx/esx_vmx.c: fix MAC address formatting
* tests/xml2vmxdata/*: update test files accordingly

In commit 3c80fac2 'vmxnet3' handling
was added to esxVMX_ParseEthernet(), but not to the inverse function
esxVMX_FormatEthernet().

* docs/drivers.html.in: list the ESX driver
* docs/drvesx.html.in: the new ESX driver documentation
* docs/hvsupport.html.in: add the ESX driver to the matrix
* docs/index.html.in, docs/sitemap.html.in: list the ESX driver
* src/esx/esx_driver.c: fix and cleanup some comments

Debian's /etc/xml/catalog doesn't contain system identifiers, so use
public identifiers instead.

* docs/Makefile.am: use public instead of system identifier
* docs/site.xsl: use matching public identifier

* src/xen/xen_hypervisor.c: xen-unstable changeset 19788 removed
  MAX_VIRT_CPUS from public headers, breaking compilation of libvirt
  on -unstable.  Its semanitc was retained with XEN_LEGACY_MAX_VCPUS.
  Ensure MAX_VIRT_CPUS is defined accordingly.

If 'with_udev=check' then missing pciaccess should not be a fatal
error. It should merely disable the udev driver.

* configure.in: Fix pciaccess check to be non-fatal

Device kit support was removed, but the configure.ac checks were
left in place. A number of the XXX_REQUIRED=X.Y.Z variables were
not declared in the correct location (ie top of the file)

* configure.in: Remove device kit checks & move mis-placed variables
  to correct location

The QEMU monitor open method would not take a reference on
the virDomainObjPtr until it had successfully opened the
monitor. The cleanup code upon failure to open though would
call qemuMonitorClose() which would in turn decrement the
reference count. This caused the virDoaminObjPtr to be mistakenly
freed and then the whole driver crashes

* src/qemu/qemu_monitor.c: Fix reference counting in
  qemuMonitorOpen

The HAL driver returns a fatal error code in the case where HAL
is not running. This causes the entire libvirtd daemon to quit
which isn't desirable. Instead it should simply disable the HAL
driver

* src/node_device/node_device_hal.c: Quietly disable HAL if it is
  not running

* daemon/libvirtd.c: Fix incorrect goto label causing cleanup to
  be missed when state driver init fails

* src/qemu/qemu_conf.c: Remove and inline qemudBuildCommandLineChrDevTargetStr

* src/security/security_apparmor.c: a few code cleanups following a
  review on the list

Fixes https://launchpad.net/bugs/453335

* src/security/virt-aa-helper.c: suppress confusing and misleading
  apparmor denied message when kvm/qemu tries to open a libvirt specified
  readonly file (such as a cdrom) with write permissions. libvirt uses
  the readonly attribute for the security driver only, and has no way
  of telling kvm/qemu that the device should be opened readonly

Fixes https://launchpad.net/bugs/460271

* src/security/virt-aa-helper.c: require absolute path for dynamic added
  files. This is required by AppArmor and conveniently prevents adding
  tcp consoles to the profile

* examples/apparmor/libvirt-qemu: adds pulseaudio, alsa and preliminary
  save/restore to the example apparmor abstraction
* examples/apparmor/usr.sbin.libvirtd: allows libvirtd access to inet
  dgram, inet6 dgram, inet6 stream and /usr/lib/libvirt/*

The 'virsh console' command did not check if the domain was
already running before attempting to fetch the XML and extract
the console PTY path. This caused a slightly unhelpful / misleading
error message for the user. The explicit check ensures the user
gets an explicit 'domain is not running' message.

* tools/virsh.c: Validate that state != VIR_DOMAIN_SHUTOFF in
  virsh console command

The wrong variable was being passed in with the LXC event callback
resulting in a later deadlock or crash

* src/lxc/lxc_driver.c: Pass 'vm' instead of 'driver' to event
  callback

In the scenario where the cgroups were mounted but the
particular group did not exist, and the caller had not
requested auto-creation, the code would fail to return
an error condition. This caused the lxc_controller to
think the cgroup existed, and it then later failed when
attempting to use it

* src/util/cgroup.c: Raise an error if the cgroup path does not
  exist