Use g_autofree to free the driver config file path.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>

These hardcoded defaults do not need to be read from
the file. Move them out of libxlDriverConfigLoadFile.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>

libxlDriverConfigNew can possibly fail on wrong
firmware values (unlikely) or on failure to create
the log directory (possible if you're debugging
tests with VIR_FILE_ACCESS)
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Fixes: 4a4132b4Reviewed-by: NJim Fehlig <jfehlig@suse.com>

The way that our file locking works is that we open() the file we
want to lock and then use fcntl(fd, F_SETLKW, ...) to lock it.
The problem is, we are doing all of these as root which doesn't
work if the file lives on root squashed NFS, because if it does
then the open() fails. The way to resolve this is to make this a
non fatal error and leave callers deal with this (i.e. disable
remembering) - implemented in the previous commit.

https://bugzilla.redhat.com/show_bug.cgi?id=1804672Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NPeter Krempa <pkrempa@redhat.com>

There are some cases where we want to remember the original owner
of a file but we fail to lock it for XATTR change (e.g. root
squashed NFS). If that is the case we error out and refuse to
start a domain. Well, we can do better if we disable remembering
for paths we haven't locked successfully.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NPeter Krempa <pkrempa@redhat.com>

So far, in the lock state we are storing only the file
descriptors of the files we've locked. Therefore, when unlocking
them and something does wrong the only thing we can report is FD
number, which is not user friendly at all. But if we store paths
among with FDs we can do better error reporting.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NPeter Krempa <pkrempa@redhat.com>

The virutil.h header defines a geteuid() macro for Windows platforms.
This fixes a few missed cases from:

  commit b11e8ccc
  Author: Ján Tomko <jtomko@redhat.com>
  Date:   Sun Feb 16 23:09:15 2020 +0100

    Remove virutil.h from all header files
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The autoreconf script will already run aclocal for us,
so there's no need to do that ahead of time.
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Signed-off-by: NJán Tomko <jtomko@redhat.com>
Fixes: b11e8ccc

Commit fb01e1a4 missed including virutil.h, causing the following
compilation error

../../src/security/virt-aa-helper.c:1055:43: error: implicit declaration of
function 'virHostGetDRMRenderNode' [-Werror=implicit-function-declaration]
1055 |                 char *defaultRenderNode = virHostGetDRMRenderNode();
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

After the split of enum functions into virenum.h,
this function does not contain anything worth including
in another header file.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

Include virutil.h in all files that use it,
instead of relying on it being pulled in somehow.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

Include unistd.h in all files that use it, instead
of relying on it being pulled in via virutil.h
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

After the introduction of virenum.h in commit 285c5f28,
it is only needed in the C file.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

Include both virutil.h and unistd.h.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

There is nothing in the vircgroup.h header file
requiring virutil.h.

Remove it and include unistd.h in the C files.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

These tests do not use anything from virutil.h
apart from the transitive include.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

Historically, this file was a dump for most of our helper
functions and needed almost everywhere.
With the introduction of virfile.h and virstring.h,
and more importantly, virenum.h and the introduction
of GLib, that is no longer true.

Remove its include from C files that don't even use it.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

Now that it is no longer used.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NLaine Stump <laine@redhat.com>

Replace it by g_ascii_xdigit_value.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NLaine Stump <laine@redhat.com>

Prefer g_ascii_xdigit_value to virHexToBin.

Check the return value of the function and
remove the g_ascii_isxdigit calls, since
they're done anyway internally.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NLaine Stump <laine@redhat.com>

When moving virclosecallbacks to src/hypervisor, I did not
adjust all the possible includes in Makefiles.

Use a path relative to src to fix the build.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Fixes: 25c29ac2

This *is* a no-op, but there was a period of sickening dread while
auditing to be sure that no actual confusion between bus and slot had
occurred. I hope to avoid that by following the conventional order.
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Signed-off-by: NRyan Moeller <ryan@iXsystems.com>

Reduce the complexity by isolating loop bodies in separate functions.
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Signed-off-by: NRyan Moeller <ryan@iXsystems.com>

Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Signed-off-by: NRyan Moeller <ryan@iXsystems.com>

Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Signed-off-by: NRyan Moeller <ryan@iXsystems.com>

Pull the code for registering and unregistering a bhyve monitor object
into separate functions to improve code clarity.
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Signed-off-by: NRyan Moeller <ryan@iXsystems.com>

This makes lifecycle management a bit easier thanks to ref counting, and
it is closer to what the qemu driver does.
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Signed-off-by: NRyan Moeller <ryan@iXsystems.com>

The file is opened O_APPEND.
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Signed-off-by: NRyan Moeller <ryan@iXsystems.com>

Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Signed-off-by: NRyan Moeller <ryan@iXsystems.com>

Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Signed-off-by: NRyan Moeller <ryan@iXsystems.com>

Just like virhostdev, this depends on domain_conf and
it's shared by multiple hypervisor drivers.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

This module depends on domain_conf and is used directly by various
hypervisor drivers.

Move it to src/hypervisor.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Currently they live in util/virhostdev.
However the virhostdev module is wrongly placed
in util, which is below conf/ in our hierarchy.

Move the functions that are actually used in conf/
to conf/ and remove the include of virhostdev.h
from domain_conf.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Allow it to be included by anything above mid_dirs.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

There are two environment variables that are baked into our
cross-compilation container images at build time, $CONFIGURE_OPTS
and $PKG_CONFIG_LIBDIR: the former contain the options necessary
to convince configure to perform a cross build rather than a
native one, and the latter is necessary so that pkg-config will
locate the .pc files for MinGW libraries. Container images that
are not intended for cross-compilation will not have either one
defined.

The problem is that, while an empty $CONFIGURE_OPTS is completely
harmless, setting $PKG_CONFIG_LIBDIR to an emtpy value will
result in pkg-config not looking in its default search path, thus
not finding any library, and subsequently breaking native builds.

To work around this issue, only pass $PKG_CONFIG_LIBDIR to sudo
when the value is set in the calling environment.

Fixes: 71517ae4Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

None of the callers actually use it.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Take the format of the backing store from the 'meta' object directly and
use g_steal_pointer to steal the path.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

When we create the new virStorageSource from the definitions stored in
the parent we should also use the 'backingStoreRawFormat' field to
populate the format.

Callers which use virStorageSourceNewFromBacking are also fixed to stop
setting the format manually.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>