QEMU is gaining a new monitor command netdev_add for hotplugging
NICs using the netdev backend code. We already support this on
the command this, though it is disabled. This adds support for
hotplug too, also to remain disabled until 0.13 QEMU is released

* src/qemu/qemu_driver.c: Support netdev hotplug for NICs
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
  support for netdev_add and netdev_remove commands

* src/datatypes.c: Use correct word.

When closing a monitor using qemuMonitorClose(), we are aware of
the possibility the monitor is still being used somewhere:

    /* NB: ordinarily one might immediately set mon->watch to -1
     * and mon->fd to -1, but there may be a callback active
     * that is still relying on these fields being valid. So
     * we merely close them, but not clear their values and
     * use this explicit 'closed' flag to track this state */

but since we call virEventAddHandle() on that monitor without increasing
its ref counter, the monitor is still freed which makes possible users
of it quite unhappy. The unhappiness can lead to a hang if qemuMonitorIO
tries to lock mutex which no longer exists.

First calling REMOTE_PROC_CLOSE and then removing watches might lead to
a hang as HANGUP event can be triggered before the watches are actually
removed but after virConnectPtr is already freed. As a result of that
remoteDomainEventFired() would try to lock uninitialized mutex, which
would hang for ever.

* tests/cpuset: Change from GPLv3 to GPLv2+
* tests/read-bufsiz: Likewise.
* tests/read-non-seekable: Likewise.
* tests/start: Likewise.
* tests/undefine: Likewise.
* tests/vcpupin: Likewise.
* tests/virsh-all: Likewise.
* tests/virsh-schedinfo: Likewise.
* tests/virsh-synopsis: Likewise.

Continuation of earlier patches to fix LIB_PTHREAD, only
triggered by ./configure --with-xen-proxy (a la autobuild.sh).

* proxy/Makefile.am (libvirt_proxy_LDADD): Add LIB_PTHREAD.

Product and vendor values were swapped in the XML, which made virt-manager
PCI device listing kinda useless.

* .gnulib: Update to latest.
* bootstrap.conf (gnulib_modules): Import netdb.
* src/esx/esx_util.c (AI_ADDRCONFIG): Rely on gnulib.
* src/remote/remote_driver.c (AI_ADDRCONFIG): Likewise.
* tools/virsh.c (WEXITSTATUS, O_SYNC): Likewise.

* bootstrap.conf (gnulib_modules): Use gettext-h, not gettext,
since the latter drags in a depedency on gettext 0.18.
Suggested by Bruno Haible.

* tests/virsh-schedinfo: This test sets PATH internally, just in
case you're running it manually.  Normally, the PATH setting from
tests/Makefile.am's TESTS_ENVIRONMENT is sufficient.  Prepend the
correct directory, and take advantage of the PATH setting in one
more case.

Allow debugging of GNUTLS interactions by setting

  LIBVIRT_GNUTLS_DEBUG=10 LIBVIRT_DEBUG=1 virsh

* src/remote/remote_driver.c: Use LIBVIRT_GNUTLS_DEBUG to
  enable gnutls debugging

* tests/cpuset: Change copyright holder from FSF to Red Hat, Inc.
* tests/read-bufsiz: Likewise.
* tests/read-non-seekable: Likewise.
* tests/start: Likewise.
* tests/undefine: Likewise.
* tests/vcpupin: Likewise.
* tests/virsh-all: Likewise.
* tests/virsh-synopsis: Likewise.

For example, virsh -c test:///default schedinfo 1 --set P=k would
mistakenly exit successfully, giving no indication that it had failed
to set the scheduling parameter "P".
* tools/virsh.c (cmdSchedinfo): Diagnose an invalid --set j=k option,
rather than silently ignoring it.
* tests/virsh-schedinfo: New test for the above.
* tests/Makefile.am (test_scripts): Add it.
Reported by Jintao Yang in http://bugzilla.redhat.com/586632

* tools/virsh.c (cmdSchedInfoUpdate): Fix typo in a diagnostic:
s/an long long/a long long/.  One in a comment, too.

* src/util/macvtap.c (delMacvtap): Fix documentation.

* src/Makefile.am (remote_protocol-structs): Ensure file lives in srcdir.

* docs/Makefile.am (ChangeLog.html.in, %.html.tmp, %.html)
(html/index.html, $(devhelphtml)): Avoid spurious subshells.

Some shells warn about missing programs before redirection;
the idiomatic way to silence them is to run the program check
inside a subshell, with the redirections outside the subshell.
But a subshell is only needed in places where it is reasonable
to expect the use of such a noisy shell in the first place.

* src/Makefile.am (remote_protocol-structs): Use subshell, for
FreeBSD 8.0 /bin/sh.
* cfg.mk (sc_preprocessor_indentation): Avoid subshell, since the
only users running cfg.mk can be assumed to have decent tools.

For printf("%*s",foo,bar), clang complains if foo is not int:

warning: field width should have type 'int', but argument has
type 'unsigned int' [-Wformat]

* src/conf/storage_encryption_conf.c
(virStorageEncryptionSecretFormat, virStorageEncryptionFormat):
Use correct type.
* src/conf/storage_encryption_conf.h (virStorageEncryptionFormat):
Likewise.

Now, if you update remote_protocol.x without also updating
remote_protocol-structs to match, then "make check" will fail.
* src/Makefile.am (remote_protocol-structs): Extract list of
structs and member names from remote_protocol.o.
(check-local): Depend on it.
* src/remote_protocol-structs: New file.

Right now, mingw32-portablexdr is not available in Fedora, but is
present in fedora-mingw.git.  With that package, plus
redhat-rpm-config and this patch, it is once again possible to build
mingw32-libvirt from a Fedora 12 host.

* mingw32-libvirt.spec.in (__debug_install_post): Override.
(%files): Mention recent additions.

This reverts commit b5b8a6db.

That commit was not necessary. The problem is fixed by commit
0e9b3a26, but I didn't rebuild
it properly after pulling in the commit and didn't notice it.

Per automake, LDFLAGS is used early in the line, and LIBADD
(libraries) or LDADD (programs) is used late.  On platforms like
cygwin, without lazy linking, this order matters.  Therefore, libtool
commands, -L, and similar should be in LDFLAGS, but -l should be in
L*ADD.

* src/Makefile.am (*_LDFLAGS): Move libraries...
(*_LIBADD): ...to their LIBADD counterpart.

* src/Makefile.am: Fix some space-tab issues.

Link virt-aa-helper explicitly with pthread. This is at least
required on Ubuntu 10.04.

* src/Makefile.am (libvirt_util_la_LDFLAGS): Add $(LIB_PTHREAD),
required, now that we're using gnulib's pthread module.

Change 965466c1 added a new field to struct remote_error, which broke
the RPC protocol. Fortunately the new field is unused, so this change
simply removes it again.

* src/remote/remote_protocol.(c|h|x): Remove remote_nwfilter from struct
  remote_error

With the introduction of the generic qemu device model, unplugging
SCSI disks works like a charm, so support it in libvirt.

* src/qemu/qemu_driver.c: Add qemudDomainDetachSCSIDiskDevice() to do the
  unplugging, extend qemudDomainDetachDeviceAdd().
Signed-off-by: NWolfgang Mauerer <wolfgang.mauerer@siemens.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

* src/qemu/qemu_driver.c (qemudFindDisk): Mark parameter const.
(qemudShrinkDisks): Mark parameter unsigned.

We can reuse some of the code for other purposes.
Signed-off-by: NWolfgang Mauerer <wolfgang.mauerer@siemens.com>

* configure.ac: Remove redundant checks.

81 patches to gnulib, picks up several new syntax checks.

* .gnulib: Update to latest.
* .x-sc_prohibit_always_true_header_tests: New file.
* bootstrap.conf (gnulib_modules): Add sched.
* src/util/processinfo.c (includes): <sched.h> is now guaranteed.
* src/network/bridge_driver.c (includes): Drop useless
<strings.h>.
* src/openvz/openvz_conf.c (includes): Likewise.
* src/openvz/openvz_driver.c (includes): Likewise.
* src/phyp/phyp_driver.c (includes): Likewise.
* src/qemu/qemu_driver.c (includes): Likewise.
* src/uml/uml_driver.c (includes): Likewise.

* configure.ac (AC_CHECK_FUNCS_ONCE, AC_SYS_LARGEFILE): Rely on
gnulib for strtok_r and large file support.
(AC_OBJEXT): Drop call now done by AC_PROG_CC.
(m4_foreach_w): Drop macro guaranteed by gnulib.
(AC_C_CONST): Drop call declared obsolete by autoconf.
Signed-off-by: NEric Blake <eblake@redhat.com>

* configure.ac: Drop sys/wait.h check.
* src/libvirt.c (includes): Use header unconditionally.
* src/remote/remote_driver.c (includes): Likewise.
* src/storage/storage_backend.c (includes): Likewise.
* src/util/ebtables.c (includes): Likewise.
* src/util/hooks.c (includes): Likewise.
* src/util/iptables.c (includes): Likewise.
* src/util/util.c (includes): Likewise.

* bootstrap.conf (gnulib_modules): Add uname.
* configure.ac: Drop uname and sys/utsname.h checks.
* src/nodeinfo.c (nodeGetInfo): Use uname unconditionally.

Gnulib can guarantee that pthread.h exists, but for now, it is a dummy
header with no support for most pthread_* functions.  Modify our
use of pthread to use function checks, rather than header checks,
to determine how much pthread support is present.

* bootstrap.conf (gnulib_modules): Add pthread.
* configure.ac: Drop all pthread.h checks.  Optimize function
checks.  Add check for pthread functions.
* src/Makefile.am (libvirt_lxc_LDADD): Ensure proper link.
* src/remote/remote_driver.c (remoteIOEventLoop): Depend on
pthread_sigmask, now that gnulib guarantees pthread.h.
* src/util/util.c (virFork): Likewise.
* src/util/threads.c (threads-pthread.c): Depend on
pthread_mutexattr_init, as a witness of full pthread support.
* src/util/threads.h (threads-pthread.h): Likewise.

* src/qemu/qemu_monitor.c (qemuMonitorIOWriteWithFD): Work around
recent clang shortcoming in analysis.

Add ebtables,iptables & iptables-ipv6 dependency to rpm.

Changes from V1 to V2:
  -passing --without-libpcap to configure script, if libpcap is not to be used