qemuProcessSetupEmulator runs at a point in time where there is only
the qemu main thread. Use virCgroupAddTask to put just that one task
into the emulator cgroup. That patch makes virCgroupMoveTask and
virCgroupAddTaskStrController obsolete.
Signed-off-by: NHenning Schild <henning.schild@siemens.com>

Use virCgroupAddTaskController in virCgroupAddTask so we have one
single point where we add tasks to cgroups.
Signed-off-by: NHenning Schild <henning.schild@siemens.com>

In cf113e8d we changed the declaration of
virCgroupAllowDevicePath() and virCgroupDenyDevicePath().
However, while updating the stub for non-cgroup platforms for the
former we forgot to update the latter too causing a build
failure.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

When adding disk images to ACL we may call those functions on NFS
shares. In that case we might get an EACCES, which isn't really relevant
since NFS would not hold a block device. This patch adds a flag that
allows to stop reporting an error on EACCES to avoid spaming logs.

Currently there's no functional change.

Since commit 47e5b5ae virCgroupAllowDevice allows to pass -1 as either
the minor or major device number and it automatically uses '*' in place
of that. Reuse the new approach through the code and drop the duplicated
functions.

Similarly to commit 47e5b5ae virCgroupDenyDevice will handle -1 as *.

In the commit 7938b533 we've changed the function signature,
however forgot to update stump that's used on systems without
CGroups causing a build failure.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Pass a bitmap of enabled guest vCPUs to virCgroupGetPercpuStats so that
non-continuous vCPU topologies can be used.

So, systemd-machined has this philosophy that machine names are like
hostnames and hence should follow the same rules.  But we always allowed
international characters in domain names.  Thus we need to modify the
machine name we are passing to systemd.

In order to change some machine names that we will be passing to systemd,
we also need to call TerminateMachine at the end of a lifetime of a
domain.  Even for domains that were started with older libvirt.  That
can be achieved thanks to virSystemdGetMachineNameByPID().  And because
we can change machine names, we can get rid of the inconsistent and
pointless escaping of domain names when creating machine names.

So this patch modifies the naming in the following way.  It creates the
name as <drivername>-<id>-<name> where invalid hostname characters are
stripped out of the name and if the resulting name is longer, it
truncates it to 64 characters.  That way we can start domains we
couldn't start before.  Well, at least on systemd.

To make it work all together, the machineName (which is needed only with
systemd) is saved in domain's private data.  That way the generation is
moved to the driver and we don't need to pass various unnecessary
arguments to cgroup functions.

The only thing this complicates a bit is the scope generation when
validating a cgroup where we must check both old and new naming, so a
slight modification was needed there.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1282846Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Use 'ret' for return variable name, clarify use of 'param_idx' and avoid
unnecessary 'success' label. No functional changes. Also document the
function.

In dc576025 we renamed virCgroupIsolateMount function to
virCgroupBindMount. However, we forgot about one occurrence in
section of the code which provides stubs for platforms without
support for CGroups like *BSD for instance.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

On the host when we start a container, it will be
placed in a cgroup path of

   /machine.slice/machine-lxc\x2ddemo.scope

under /sys/fs/cgroup/*

Inside the containers' namespace we need to setup
/sys/fs/cgroup mounts, and currently will bind
mount /machine.slice/machine-lxc\x2ddemo.scope on
the host to appear as / in the container.

While this may sound nice, it confuses applications
dealing with cgroups, because /proc/$PID/cgroup
now does not match the directory in /sys/fs/cgroup

This particularly causes problems for systems and
will make it create repeated path components in
the cgroup for apps run in the container eg

  /machine.slice/machine-lxc\x2ddemo.scope/machine.slice/machine-lxc\x2ddemo.scope/user.slice/user-0.slice/session-61.scope

This also causes any systemd service that uses
sd-notify to fail to start, because when systemd
receives the notification it won't be able to
identify the corresponding unit it came from.
In particular this break rabbitmq-server startup

Future kernels will provide proper cgroup namespacing
which will handle this problem, but until that time
we should not try to play games with hiding parent
cgroups.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This reverts commit 71ce4759.

Since commit id 'a41c00b4' has been reverted, this no longer is
necessary

As cgroup implementation only works on Linux, it does not
make much sense to include sys/mount.h if other requirements are
not met, such as HAVE_MNTENT_H and HAVE_GETMNTENT_R.

Also, it fixes build on OpenBSD that requires to include sys/param.h
along with sys/mount.h.
Signed-off-by: NRoman Bogorodskiy <bogorodskiy@gmail.com>

The manpage for sysconf() suggest including unistd.h as the
function is declared there. Even though we are not hitting any
compile issues currently, let's include the correct header file
instead of relying on some hidden include chain.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

virCgroupNewMachine used to add the pidleader to the newly created
machine cgroup. Do not do this implicit anymore.
Signed-off-by: NHenning Schild <henning.schild@siemens.com>

Commit 89c509a0 added getters for cgroup block device I/O throttling,
however stub versions of these functions have not matching function
prototypes that result in compilation fail on platforms not supporting
cgroup.

Fix build by correcting prototypes of the stubbed functions.

Pushing under build-breaker rule.

Since now they were not needed, but I sense they will be in a short
while.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This function translates device paths to "major:minor " string, and all
virCgroupSetBlkioDevice* functions are modified to use it.  It's a
cleanup with no functional change.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

The scope name, even according to our docs is
"machine-$DRIVER\x2d$VMNAME.scope" virSystemdMakeScopeName would use the
resource partition name instead of "machine-" if it was specified thus
creating invalid scope paths.

This makes libvirt drop cgroups for a VM that uses custom resource
partition upon reconnecting since the detected scope name would not
match the expected name generated by virSystemdMakeScopeName.

The error is exposed by the following log entry:

debug : virCgroupValidateMachineGroup:302 : Name 'machine-qemu\x2dtestvm.scope' for controller 'cpu' does not match 'testvm', 'testvm.libvirt-qemu' or 'machine-test-qemu\x2dtestvm.scope'

for a "/machine/test" resource and "testvm" vm.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1238570

Add the sysfs_prefix argument to the call to allow for setting the
path for tests to something other than SYSFS_SYSTEM_PATH.

Replace the virCgroupNew{Vcpu|Emulator|IOThread} calls with the common
virCgroupNewThread API
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Create a new common API to replace the virCgroupNew{Vcpu|Emulator|IOThread}
API's using an emum to generate the cgroup name
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

This new internal API checks if given CGroup controller is
available.  It is going to be needed later when we need to make a
decision whether pin domain memory onto NUMA nodes using cpuset
CGroup controller or using numa_set_membind().
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

When creating new internal representation of cgroups, all passed
arguments are logged. Well, except for two: pid and pointer for
return value. Lets log them too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The function has no argument named @name rather than @path
instead.  The comment is, however, referring to @name while it
should have been referring to @path really.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Commit id '2dbfa716' exposed virCgroupDetectMountsFromFile, but did not
add the corresponding entry in the "#else /* !VIR_CGROUP_SUPPORTED */"
section of the module.

Commit id 'ba1dfc5b' added virCgroupSetCpusetMemoryMigrate and
virCgroupGetCpusetMemoryMigrate, but did not add the corresponding
entry points into the "#else /* !VIR_CGROUP_SUPPORTED */" section

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

A helper that never returns an error and treats bits out of bitmap range
as false.

Use it everywhere we use ignore_value on virBitmapGetBit, or loop over
the bitmap size.

Coverity reports that my commit af1c98e4 introduced
two memory leaks:
the cpumap if ncpus == 0 in virCgroupGetPercpuStats
and the params array in the test of the function.

Per-cpu stats are only shown for present CPUs in the cgroups,
but we were only parsing the largest CPU number from
/sys/devices/system/cpu/present and looking for stats even for
non-present CPUs.
This resulted in:
internal error: cpuacct parse error

Commit 318df5a0 changed the prototype of virCgroupNewMachine
without adjusting the stub function for platforms without
cgroups.

systemd-machined introduced a new method CreateMachineWithNetwork
that obsoletes CreateMachine. It expects to be given a list of
VETH/TAP device indexes for the host side device(s) associated
with a container/machine.

This falls back to the old CreateMachine method when the new
one is not supported.

Commit 1a80b97d, which added the virCgroupHasEmptyTasks() function
forgot that the parameter @cgroup may be NULL and did not check that.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

That function helps checking whether there's a task in that cgroup.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

When calling virCgroupAllowAllDevices we get these invalid entries
in the device cgroup config.
    b -1:-1 rw
    c -1:-1 rw
Check for positive values before outputting the major and minor to
avoid that.

I noticed this while working on qemuDomainGetBlockInfo.  Assigning
a bool value to an int variable compiles fine, but raises red flags
on the maintenance front as it becomes too easy to assign -1 or 2
or any other non-bool value to the same variable.

* cfg.mk (sc_prohibit_int_assign_bool): New rule.
* src/conf/snapshot_conf.c (virDomainSnapshotRedefinePrep): Fix
offenders.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo)
(qemuDomainSnapshotCreateXML): Likewise.
* src/test/test_driver.c (testDomainSnapshotAlignDisks):
Likewise.
* src/util/vircgroup.c (virCgroupSupportsCpuBW): Likewise.
* src/util/virpci.c (virPCIDeviceBindToStub): Likewise.
* src/util/virutil.c (virIsCapableVport): Likewise.
* tools/virsh-domain-monitor.c (cmdDomMemStat): Likewise.
* tools/virsh-domain.c (cmdBlockResize, cmdScreenshot)
(cmdInjectNMI, cmdSendKey, cmdSendProcessSignal)
(cmdDetachInterface): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Fix the build on FreeBSD, broken by commit 4882618e.
Signed-off-by: NJán Tomko <jtomko@redhat.com>