Add an attribute named 'removable' to the 'target' element of disks,
which controls the removable flag. For instance, on a Linux guest it
controls the value of /sys/block/$dev/removable. This option is only
valid for USB disks (i.e. bus='usb'), and its default value is 'off',
which is the same behaviour as before.

To achieve this, 'removable=on' (or 'off') is appended to the '-device
usb-storage' parameter sent to qemu when adding a USB disk via
'-disk'. A capability flag QEMU_CAPS_USB_STORAGE_REMOVABLE was added
to keep track if this option is supported by the qemu version used.

Bug: https://bugzilla.redhat.com/show_bug.cgi?id=922495Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Allow use of the usb-storage device only if the new capability flag
QEMU_CAPS_DEVICE_USB_STORAGE is set, which it is for qemu(-kvm)
versions >= 0.12.1.2-rhel62-beta.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

QEMU commit 3984890 introduced the "pci-hole64-size" property,
to i440FX-pcihost and q35-pcihost with a default setting of 2 GB.

Translate <pcihole64>x<pcihole64/> to:
-global q35-pcihost.pci-hole64-size=x for q35 machines and
-global i440FX-pcihost.pci-hole64-size=x for i440FX-based machines.

Error out on other machine types or if the size was specified
but the pcihost device lacks 'pci-hole64-size' property.

https://bugzilla.redhat.com/show_bug.cgi?id=990418

We will have to pass a mock-up of the driver when testing monitor
events.

This PCI controller, named "dmi-to-pci-bridge" in the libvirt config,
and implemented with qemu's "i82801b11-bridge" device, connects to a
PCI Express slot (e.g. one of the slots provided by the pcie-root
controller, aka "pcie.0" on the qemu commandline), and provides 31
*non-hot-pluggable* PCI (*not* PCIe) slots, numbered 1-31.

Any time a machine is defined which has a pcie-root controller
(i.e. any q35-based machinetype), libvirt will automatically add a
dmi-to-pci-bridge controller if one doesn't exist, and also add a
pci-bridge controller. The reasoning here is that any useful domain
will have either an immediate (startup time) or eventual (subsequent
hot-plug) need for a standard PCI slot; since the pcie-root controller
only provides PCIe slots, we need to connect a dmi-to-pci-bridge
controller to it in order to get a non-hot-plug PCI slot that we can
then use to connect a pci-bridge - the slots provided by the
pci-bridge will be both standard PCI and hot-pluggable.

Since pci-bridge devices themselves can not be hot-plugged into a
running system (although you can hot-plug other devices into a
pci-bridge's slots), any new pci-bridge controller that is added can
(and will) be plugged into the dmi-to-pci-bridge as long as it has
empty slots available.

This patch is also changing the qemuxml2xml-pcie test from a "DO_TEST"
to a "DO_DIFFERENT_TEST". This is so that the "before" xml can omit
the automatically added dmi-to-pci-bridge and pci-bridge devices, and
the "after" xml can include it - this way we are testing if libvirt is
properly adding these devices.

https://bugzilla.redhat.com/show_bug.cgi?id=981094
The commit 0ad9025e introduce qemu flag QEMU_CAPS_DEVICE_VIDEO_PRIMARY
for using -device VGA, -device cirrus-vga, -device vmware-svga and
-device qxl-vga. In use, for -device qxl-vga, mouse doesn't display
in guest window like the desciption in above bug.
This patch try to use -device for primary video when qemu >=1.6 which
contains the bug fix patch

Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Implement check whether (maximum) vCPUs doesn't exceed machine
type's cpu-max settings.

On older versions of QEMU the check is disabled.
Signed-off-by: NMichal Novotny <minovotn@redhat.com>

When qemu >= 1.20, it is safe to use -device for primary video
device as described in 4c993d8a.
So, we are missing the cap flag in QMP capabilities detection, this
flag can be initialized safely in virQEMUCapsInitQMPBasic.

Found with 'git grep "= 1"'.

QEMU_CAPS_VNC_SHARE_POLICY (qemu >= 1.1)

QEMU introduced "discard" option for drive since commit a9384aff53,

<...>
@var{discard} is one of "ignore" (or "off") or "unmap" (or "on") and
controls whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
requests are ignored or passed to the filesystem.  Some machine types
may not support discard requests.
</...>

This patch exposes the support in libvirt.

QEMU supported "discard" for "-drive" since v1.5.0-rc0:

% git tag --contains a9384aff53
contains
v1.5.0-rc0
v1.5.0-rc1

So this only detects the capability bit using virQEMUCapsProbeQMPCommandLine.

Adding a VNC WebSocket support for QEMU driver.  This functionality is
in upstream qemu from commit described as v1.3.0-982-g7536ee4, so the
capability is being recognized based on QEMU version for now.

* src/qemu/qemu_capabilities.h: New capability bit.
* src/qemu/qemu_capabilities.c (virQEMUCapsProbeQMPCommandLine): New
function, based on qemuMonitorGetCommandLineOptionParameters, which was
introduced by commit bd56d0d8; use it to set new capability bit.
(virQEMUCapsInitQMP): Use new function.

Adding two cap flags for scsi-generic:
  QEMU_CAPS_SCSI_GENERIC
  QEMU_CAPS_SCSI_GENERIC_BOOTINDEX
Signed-off-by: NHan Cheng <hanc.fnst@cn.fujitsu.com>
Signed-off-by: NOsier Yang <jyang@redhat.com>

The individual hypervisor drivers were directly referencing
APIs in src/nodeinfo.c in their virDriverPtr struct. Separate
these methods, so there is always a wrapper in the hypervisor
driver. This allows the unused virConnectPtr args to be
removed from the nodeinfo.c file. Again this will ensure that
ACL checks will only be performed on invocations that are
directly associated with public API usage.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

On architectures not supporting the Intel specific programmable interval
timer, like e.g. S390, starting a domain with a clock definition containing
a pit timer results in the error "Option no-kvm-pit-reinjection not supported
for this target".

By moving the capability enablement for -no-kvm-pit-reinjection from the
InitQMPBasic section into the x86_64 and i686 only enablement section all
other architectures are no longer automatically enabled. In addition
architecture related capabilities enablements have refactored into a new
architecture bound capabilities initialization function.
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.

QEMU_CAPS_DEVICE_VFIO_PCI is set if the device named "vfio-pci" is
supported in the qemu binary.

QEMU_CAPS_VFIO_PCI_BOOTINDEX is set if the vfio-pci device supports
the "bootindex" parameter;  for some reason, the bootindex parameter
wasn't included in early versions of vfio support (qemu 1.4) so we
have to check for it separately from vfio itself.

Signed-off-by: NJán Tomko <jtomko@redhat.com>

This patch is to add command line builder and parser
for NVRAM device, and add test cases.
Signed-off-by: NLi Zhang <zhlcindy@linux.vnet.ibm.com>

Reusing the result of virArchFromHost instead of calling it multiple times
Signed-off-by: NTal Kain <tal.kain@ravellosystems.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Revert the patch checking for the QMP query-tpm-models
command.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

Check for QMP query-tpm-models and set a capability flag. Do not use
this QMP command if it is not supported.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Tested-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>

Probe for QEMU's QMP TPM support by querying the lists of
supported TPM models (query-tpm-models) and backend types
(query-tpm-types). 

The setting of the capability flags following the strings
returned from the commands above is only provided in the
patch where domain_conf.c gets TPM support due to dependencies
on functions only introduced there. 
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Tested-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>

To avoid the collision for creating USB controllers in machine->init()
and -device xx command line, it needs to set usb=off to avoid one USB
controller created in machine->init(). So that libvirt can use -device
or -usb to create USB controller sucessfully.
So QEMU_CAPS_MACHINE_USB_OPT capability is added, and it is for QEMU
v1.3.0 onwards which supports USB option.
Signed-off-by: NLi Zhang <zhlcindy@linux.vnet.ibm.com>

This patch refactors various places to allow removing of the
defaultConsoleTargetType callback from the virCaps structure.

A new console character device target type is introduced -
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_NONE - to mark that no type was
specified in the XML. This type is at the end converted to the standard
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_SERIAL. Other types that are
different from this default have to be processed separately in the
device post parse callback.

Use the virDomainXMLConf structure to hold this data and tweak the code
to avoid semantic change.

Without configuration the KVM mac prefix is used by default. I chose it
as it's in the privately administered segment so it should be usable for
any purposes.

This patch removes the emulatorRequired field and associated
infrastructure from the virCaps object. Instead the driver specific
callbacks are used as this field isn't enforced by all drivers.

This patch implements the appropriate callbacks in the qemu and lxc
driver and moves to check to that location.