- 02 7月, 2016 15 次提交
-
-
由 Laine Stump 提交于
For type='ethernet' interfaces only. (This patch had been pushed earlier in commit 0b4645a7, but was reverted in commit 84d47a3c because it had been accidentally pushed during the freeze for release 2.0.0)
-
由 Laine Stump 提交于
(This patch had been pushed earlier in commit cd5c9f21, but was reverted in commit 1549f168 because it had been accidentally pushed during the freeze for release 2.0.0)
-
由 Laine Stump 提交于
This will apply to any IP address setting that uses virNetDevIPInfoAddToDev() (which so far is only the guest-side of LXC type='ethernet' interfaces). (This patch had been pushed earlier in commit cb20f989, but was reverted in commit cba06aea because it had been accidentally pushed during the freeze for release 2.0.0)
-
由 Laine Stump 提交于
This is place as a sub-element of <source>, where other aspects of the host-side connection to the network device are located (network or bridge name, udp listen port, etc). It's a bit odd that the interface we're configuring with this info is itself named in <target dev='x'/>, but that ship sailed long ago: <interface type='ethernet'> <mac address='00:16:3e:0f:ef:8a'/> <source> <ip address='192.168.122.12' family='ipv4' prefix='24' peer='192.168.122.1'/> <ip address='192.168.122.13' family='ipv4' prefix='24'/> <route family='ipv4' address='0.0.0.0' gateway='192.168.122.1'/> <route family='ipv4' address='192.168.124.0' prefix='24' gateway='192.168.124.1'/> </source> </interface> In practice, this will likely only be useful for type='ethernet', so its presence in any other type of interface is currently forbidden in the generic device Validate function (but it's been put into the general population of virDomainNetDef rather than the ethernet-specific union member so that 1) we can more easily add the capability to other types if needed, and 2) we can retain the info when set to an invalid interface type all the way through to validation and report a proper error, rather than just ignoring it (which is currently what happens for many other type-specific settings). (NB: The already-existing configuration of IP info for the guest-side of interfaces is in subelements directly under <interface>, and the name of the guest-side interface (when configurable) is in <guest dev='x'/>). (This patch had been pushed earlier in commit fe6a7789, but was reverted in commit d6584565 because it had been accidentally pushed during the freeze for release 2.0.0)
-
由 Vasiliy Tolstov 提交于
The peer attribute is used to set the property of the same name in the interface IP info: <interface type='ethernet'> ... <ip family='ipv4' address='192.168.122.5' prefix='32' peer='192.168.122.6'/> ... </interface> Note that this element is used to set the IP information on the *guest* side interface, not the host side interface - that will be supported in an upcoming patch. (This patch now has quite a history: it was originally pushed in commit 690969af, which was subsequently reverted in commit 1d14b13f, then reworked and pushed (along with a lot of other related/supporting patches) in commit 93135abf; however *that* commit had been accidentally pushed during dev. freeze for release 2.0.0, so it was again reverted in commit f6acf039). Signed-off-by: NVasiliy Tolstov <v.tolstov@selfip.ru> Signed-off-by: NLaine Stump <laine@laine.org>
-
由 Laine Stump 提交于
This patch takes the code out of lxcContainerRenameAndEnableInterfaces() that adds all IP addresses and IP routes to the interface, and puts it into a utility function virNetDevIPInfoAddToDev() in virnetdevip.c so that it can be used by anyone. One small change in functionality - lxcContainerRenameAndEnableInterfaces() previously would add all IP addresses to the interface while it was still offline, then set the interface online, and then add the routes. Because I don't want the utility function to set the interface online, I've moved this up so the interface is first set online, then IP addresses and routes are added. This is the same order that the network service from initscripts (in ifup-ether) does it, so it shouldn't pose any problem (and hasn't, in the tests that I've run). (This patch had been pushed earlier in commit f1e0d0da, but was reverted in commit 05eab475 because it had been accidentally pushed during the freeze for release 2.0.0)
-
由 John Ferlan 提交于
Introduce a helper to help determine if a disk src could be possibly used for a disk secret... Going to need this for hot unplug. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
For a luks device, allow the configuration of a specific cipher to be used for encrypting the volume. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add parse and format of the luks/passphrase secret including tests for volume XML parsing. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
In order to use more common code and set up for a future type, modify the encryption secret to allow the "usage" attribute or the "uuid" attribute to define the secret. The "usage" in the case of a volume secret would be the path to the volume as dictated by the backwards compatibility brought on by virStorageGenerateQcowEncryption where it set up the usage field as the vol->target.path and didn't allow someone to provide it. This carries into virSecretObjListFindByUsageLocked which takes the secret usage attribute value from from the domain disk definition and compares it against the usage type from the secret definition. Since none of the code dealing with qcow/qcow2 encryption secrets uses usage for lookup, it's a mostly cosmetic change. The real usage comes in a future path where the encryption is expanded to be a luks volume and the secret will allow definition of the usage field. This code will make use of the virSecretLookup{Parse|Format}Secret common code. Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Add a new secret type known as "passphrase" - it will handle adding the secret objects that need a passphrase without a specific username. The format is: <secret ...> <uuid>...</uuid> ... <usage type='passphrase'> <name>mumblyfratz</name> </usage> </secret> Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 John Ferlan 提交于
Since the virSecretDefParseUsage ensures each of the fields is present, no need to check during virSecretDefFormatUsage (also virBufferEscapeString is a no-op with a NULL argument). Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Brandon Bennett 提交于
This replicates the metadata field found in the domain configuration and adds it to the network configuration XML.
-
由 Laine Stump 提交于
This is a generic version of virDomainDefMetadataSanitize() - the same functionality is now needed for network metadata.
-
由 Laine Stump 提交于
I can't think of any good reason to do either of those, and having the examples there will just lead to unusable patch emails from people who can't be bothered to read the entire page.
-
- 01 7月, 2016 21 次提交
-
-
由 Andrea Bolognani 提交于
Remove the local kvmpath variable from virHostCPUGetThreadsPerSubcore() and use the file-global KVM_DEVICE define instead.
-
由 Ján Tomko 提交于
On error, asprintf returns -1 and the contents of the string pointer is undefined. In the rest of the libvirt code, the virAsprintf wrapper takes care of that. Check the return value and report a generic error, since we purposefully avoid linking to virutil.
-
由 Daniel P. Berrange 提交于
The default Fedora build roots for f25 and newer no longer include perl. We must thus explicitly ask for it as the RPC gendispatch.pl program needs it, and the Getopt::Long module. Do this unconditionally since it isn't harmful for older Fedora Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
When the admin API was enabled no entries were added to the file list. The virt-host-validate binary is also no longer built on win32 Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Cole Robinson 提交于
Since it's not strictly a uuid anymore
-
由 Cole Robinson 提交于
This allows event implementations to match on something other than an object's uuid, like nodedev or interface objects which don't have a uuid.
-
由 Cole Robinson 提交于
This should not have any functional difference, it's just a step towards matching on non-uuid string keys
-
由 Cole Robinson 提交于
In every other instance virObjectEventCallbackPtr is named 'cb', and in other code 'event' usually means a virObjectEventPtr
-
由 Cole Robinson 提交于
-
由 Cole Robinson 提交于
It's only used in object_event.c, so remove it from the header. We need to move the _virObjectEventCallback definition earlier as a result.
-
由 Ján Tomko 提交于
A helper that will execute a callback on every USB device in the domain definition. With an ability to skip USB hubs, since we will want to treat them differently in some cases.
-
由 Ján Tomko 提交于
This test assumes the XML will be the same after formatting. Add USB addresses to it to keep it working when we autoassign them.
-
由 Jiri Denemark 提交于
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Jiri Denemark 提交于
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Jiri Denemark 提交于
I'm not sure why our code claimed "-boot menu=on" cannot be used in combination with per-device bootindex, but it was proved wrong about four years ago by commit 8c952908. Let's always use bootindex when QEMU supports it. https://bugzilla.redhat.com/show_bug.cgi?id=1323085Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Jiri Denemark 提交于
virttype is already included in domCaps, no need to pass it separately. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Jiri Denemark 提交于
virQEMUCapsFillDomainCaps would use virHostCPUGetKVMMaxVCPUs for KVM domains. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Jiri Denemark 提交于
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Jiri Denemark 提交于
Pretending (partial) support for something we don't understand is risky. Reporting a failure is much better. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Jiri Denemark 提交于
-
由 Daniel Veillard 提交于
* docs/news.html.in: update documentation * po/*.po*: regenerate
-
- 30 6月, 2016 4 次提交
-
-
由 Martin Kletzander 提交于
This almost reverts b7200d72. The size is increased from 11M to 13M and the compression is sped up from 2 minutes to 17 seconds. The compression level is removed because -9 doesn't allow multiple threads to be spawned. Effectively speeds up distcheck as well. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Peter Krempa 提交于
virTypedParameterAssign steals the string rather than copying it into the typed parameter and thus freeing it leads to a crash when attempting to serialize the results. This was introduced in commit 9f50f6e2 and later made an universal helper in 32e6339c. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1351473
-
由 Peter Krempa 提交于
Some code paths already assume that it is allocated since it was always allocated by virDomainPerfDefParseXML. Make it member of virDomainDef directly so that we don't have to allocate it all the time. This fixes crash when attempting to connect to an existing process via virDomainQemuAttach since we would not allocate it in that code path. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1350688
-
由 Jiri Denemark 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1046833Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-