Change the domain conf so invoke the new network port public APIs instead
of the network callbacks.
Reviewed-by: NLaine Stump <laine@laine.org>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The portid will be the UUID of the virNetworkPort object associated
with the network interface when a guest is running.
Reviewed-by: NLaine Stump <laine@laine.org>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The current qemu driver code for changing bandwidth on a NIC first asks
the network driver if the change is supported, then changes the
bandwidth on the VIF, and then tells the network driver to update the
bandwidth on the bridge.

This is potentially racing if a parallel API call causes the network
driver to allocate bandwidth on the bridge between the check and the
update phases.

Change the code to just try to apply the network bridge update
immediately and rollback at the end if something failed.
Reviewed-by: NLaine Stump <laine@laine.org>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Helper APIs are needed to

 - Populate basic virNetworkPortDef from virDomainNetDef
 - Set a virDomainActualNetDef from virNetworkPortDef
 - Populate a full virNetworkPortDef from virDomainActualNetDef
Reviewed-by: NLaine Stump <laine@laine.org>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The domain conf actual network def stores a <class id='3'/> element
separately from the <bandwidth>. The class ID should really just be
an attribute on the <bandwidth> element. We can't change existing
XML, and this isn't visible to users since it is internal XML only.
When we expose the new network port XML to users though, we should
get the design right.
Reviewed-by: NLaine Stump <laine@laine.org>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

SMMUv3 is an IOMMU implementation for ARM virt guests.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Apart from virDomainDefValidate, virDomainDefPostParse is another
place where operating on info-less devices makes sense.
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Rename the DOMAIN_DEVICE_ITERATE_GRAPHICS flag.
It was introduced by commit dd45c271
with the intention to run the Validate callback even on the graphics
device.

However, enumerating every single device in virDomainDeviceIterateFlags
is unsustainable and what really was special about the graphics device
was the lack of DeviceInfo.

Rename the flag and iterate over more info-less devices. (and leases)
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Due to the way that our virObjectUnref() is written it's not
possible that a NULL is passed into *Dispose() function. However,
some functions check for that regardless.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Commits 4bc42986 and 218c81ea removed virDomainStorageSourceFormat on
the grounds that there were no external callers; however, the upcoming
backup code wants to output a <target> (push mode) or <scratch> (pull
mode) element that is in all other respects identical to a domain's
<source> element, where the previous virDomainStorageSourceFormat fit
the bill nicely. But rather than reverting the commits, it's easier to
just add an additional parameter for the element name to use, and
update all callers.
Signed-off-by: NEric Blake <eblake@redhat.com>

This caused the live XML to report the 'bridge' type instead of the
'network' type, which is a behavioural regression.

It also breaks 'virsh domif-setlink', 'virsh update-device' and
'virsh domiftune'

This reverts commit 518026e1.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

This reverts commit f1d65853.

Turns out, this caused a regression. There is this (perhaps less
known) semantic of virDomainAttachDevice() where if the device
the API is trying to attach is a CDROM/floppy that is already in
the domain the attach request is handled as 'change the media in
the drive'.

We have a better fix anyways.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Tested-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>

This function checks if given drive address is already present in
passed domain definition. Expose the function as it will be used
shortly.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Tested-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>

During initial NIC setup the hypervisor drivers are responsible for
attaching the TAP device to the bridge device. Any fixup after libvirtd
restarts should thus also be their responsibility.
Reviewed-by: NLaine Stump <laine@laine.org>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Ports allocated on virtual networks with type=nat|route|open all get
given an actual type of 'network'.

Only ports in networks with type=bridge use an actual type of 'bridge'.

This distinction makes little sense since the virtualization drivers
will treat both actual types in exactly the same way, as they're all
just bridge devices a VM needs to be connected to.

This doesn't affect user visible XML since the "actual" device XML
is internal only, but we need code to convert the data upgrades.
Reviewed-by: NLaine Stump <laine@laine.org>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The virNetDevBandwidthParse method uses the interface type to decide
whether to allow use of the "floor" parameter. Using the interface
type is not convenient as callers may not have that available, but
still wish to allow use of "floor". Switch to an explicit boolean
to control its usage.
Reviewed-by: NLaine Stump <laine@laine.org>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Wire up the accessor functions necessary for the testsuite to install
an alternative post-parse handler from normal drivers. I could have
modified the signature for virDomainXMLOptionNew() to take another
parameter, but thought it was easier to add a new set function rather
than chase down all existing callers. Until code actually sets the
override, there is no change in behavior.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

This requires drivers to opt in to handle the raw modelstr
network model, all others will error if a passed in XML value
is not in the model enum.

Enable this feature for libxl/xen/xm and qemu drivers
Acked-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Convert the vbox driver to net model enum, which requires adding
enum values for Am79C970A, Am79C973, 82540EM, 82545EM, 82543GC. We
preserve the same casing that vbox historically used for these model
names.

Remove the now unused virDomainNetStrcaseeqModelString
Acked-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Convert the vmware/vmx driver to net model enum, which requires
adding enum values for vlance, vmxnet, vmxnet2, and vmxnet3.
Acked-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

vbox and vmx drivers do net case insensitive net model comparisons,
so for example 'VMXNET3' and 'vmxnet3' and 'VmxNeT3' in the XML will
translate to the same driver configuration. To convert these drivers
to use net model enum, we will need to do case insensitive comparisons
as well.

Essentially we implement virEnumToString, but with case insensitive
comparison. XML will always be formatted with the enum model string
we track internally, but we will accept any case insensitive variant.
Acked-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

This converts the qemu driver to the net model enum, for all
the model values that we have hardcoded for various checks,
which adds e1000e, virtio-transitional, virtio-non-transitional,
usb-net, spapr-vlan, lan9118, smc91c111

Because the qemu driver has historically also allowed the raw
model string onto the qemu command line, this isn't a full
conversion. Unwinding that will require more thought. However
for all new driver code we should be adding explicit enum
values for any model name we have special handling for.

Remove the now unused virDomainNetStreqModelString
Acked-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

The vz driver only handles three models: virtio, e1000, and rtl8139.
Add enum values for those models, and convert the vz driver to
handling net->model natively
Acked-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

This adds a network model enum. The virDomainNetDef property
is named 'model' like most other devices.

When the XML parser or a driver calls NetSetModelString, if
the passed string is in the enum, we will set net->model,
otherwise we copy the string into net->modelstr

Add a single example for the 'netfront' xen model, and wire
that up, just to verify it's all working
Acked-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

We will be adding a 'model' enum in upcoming patches. Rename
the existing value to make the differentiation clear
Acked-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

To ease converting the net->model value to an enum, add
the wrapper functions:

virDomainNetGetModelString
virDomainNetSetModelString
virDomainNetStreqModelString
virDomainNetStrcaseeqModelString
Acked-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

In the case of a network with forward=bridge, which has a bridge device
listed, we are capable of setting bandwidth limits but fail to call the
function to register them.
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

hostdevs have a link back to the original network device. This is fairly
generic accepting any type of device, however, we don't intend to make
use of this approach in future. It can thus be specialized to network
devices.
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The APIs for allocating/notifying/removing network ports just take
an internal domain interface struct right now. As a step towards
turning these into public facing APIs, add a virNetworkPtr argument
to all of them.
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The port allocation APIs are currently called unconditionally for all
types of NIC, but (mostly) only do anything for NICs with type=network.

The exception is the port allocate API which does some validation even
for NICs with type!=network. Relying on this validation is flawed,
however, since the network driver may not even be installed. IOW virt
drivers must not delegate validation to the network driver for NICs
with type != network.

This change allows us to report errors when the virtual network driver
is not registered.
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This will be used later when we want to format emulator scheduler parameters
which don't apply for multiple threads.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This will become useful later when parsing emulatorsched parameters which don't
need the rest of the current function.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Standardize on putting the _LAST enum value on the second line
of VIR_ENUM_IMPL invocations. Later patches that add string labels
to VIR_ENUM_IMPL will push most of these to the second line anyways,
so this saves some noise.
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Similarly to the disk source we need to keep the disk index (which is in
the qemu driver used for identification of the source for block jobs)
for the <mirror> element so that when it's replaced as a disk source
after pivoting all the allocated data is present.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

When the block copy operation is started with a reused external file in
incremental mode libvirt will need to open and insert the backing chain
for that file into qemu (in -blockdev mode). This means that we'll need
to track the backing chain and metadata such as node names for the full
chain of <mirror>.

This patch invokes the full backing chain formatter and parser for
<mirror> so that the chain can be kept with <mirror>.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Use virDomainStorageSourceParseBase and other tricks.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

We have the proper flags available so we can pass them to the fomatter.
The added bonus is that private data may be formatted into the status
XML.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Pass in 'src' rather than the backing store of it.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>