The virQEMUDriverConfig object contains lists of
loader:nvram pairs to advertise firmwares supported by
by the driver, and qemu_conf.c contains code to populate
the lists, all of which is useful for other drivers too.

To avoid code duplication, introduce a virFirmware object
to encapsulate firmware details and switch the qemu driver
to use it.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

The manpage for sysconf() suggest including unistd.h as the
function is declared there. Even though we are not hitting any
compile issues currently, let's include the correct header file
instead of relying on some hidden include chain.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Currently the QEMU stdout/stderr streams are written directly to
a regular file (eg /var/log/libvirt/qemu/$GUEST.log). While those
can be rotated by logrotate (using copytruncate option) this is
not very efficient. It also leaves open a window of opportunity
for a compromised/broken QEMU to DOS the host filesystem by
writing lots of text to stdout/stderr.

This makes it possible to connect the stdout/stderr file handles
to a pipe that is provided by virtlogd. The virtlogd daemon will
read from this pipe and write data to the log file, performing
file rotation whenever a pre-determined size limit is reached.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Our atomic increment (virAtomicIntInc) uses (if available) gcc
__sync_add_and_fetch builtin. In qemu driver though, we'd profit more
from __sync_fetch_and_add builtin. To keep it simplistic, this patch
adjusts qemu driver initialization rather than adding a new atomic
increment macro.

If QEMU fails during incoming migration, the domain disappears including
a possibly useful error message read from QEMU log file. Let's remember
the error in virQEMUDriver so that Finish can report more than just "no
such domain".
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The privileged flag will not change while the configuration might
change. Make the 'privileged' flag member of the driver again and mark
it immutable. Should that ever change add an accessor that will group
reads of the state.

Similar to what was done for the channel socket in the previous commit.

Rather than depend on the RPM to put it in place, since this doesn't
cover the qemu:///session case. Currently auto allocated socket path is
completely busted with qemu:///session

https://bugzilla.redhat.com/show_bug.cgi?id=1105274

And because we chown the directory at driver startup now, this also fixes
autosocket startup failures when using user/group=root

https://bugzilla.redhat.com/show_bug.cgi?id=1044561
https://bugzilla.redhat.com/show_bug.cgi?id=1146886

Changing the prototype to not have "int *index" since we'll soon be
disallowing index as a name. Curiously the original commit (a4504ac1)
for the function used 'int idx' in the function - so they didn't match.
Now they do.

Commit f36a94f2 introduced a double free on all success paths
in qemuSharedDeviceEntryInsert.

Only call qemuSharedDeviceEntryFree on the error path and
set entry to NULL before jumping there if the entry already
is in the hash table.

https://bugzilla.redhat.com/show_bug.cgi?id=1142722

When using split UEFI image, it may come handy if libvirt manages per
domain _VARS file automatically. While the _CODE file is RO and can be
shared among multiple domains, you certainly don't want to do that on
the _VARS file. This latter one needs to be per domain. So at the
domain startup process, if it's determined that domain needs _VARS
file it's copied from this master _VARS file. The location of the
master file is configurable in qemu.conf.

Temporary, on per domain basis the location of master NVRAM file can
be overridden by this @template attribute I'm inventing to the
<nvram/> element. All it does is holding path to the master NVRAM file
from which local copy is created. If that's the case, the map in
qemu.conf is not consulted.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

Instead of tediously copying of the disk source to remove it later
ensure that the media change function removes the old device after it
succeeds.

Currently, qemu driver uses qemuTranslateDiskSourcePool()
to translate disk volume information. This function is
general enough and could be used for other drivers as well,
so move it to conf/domain_conf.c along with its helpers.

 - qemuTranslateDiskSourcePool: move to storage/storage_driver.c
   and rename to virStorageTranslateDiskSourcePool,
 - qemuAddISCSIPoolSourceHost: move to storage/storage_driver.c
   and rename to virStorageAddISCSIPoolSourceHost,
 - qemuTranslateDiskSourcePoolAuth: move to storage/storage_driver.c
   and rename to virStorageTranslateDiskSourcePoolAuth,
 - Update users of qemuTranslateDiskSourcePool to use a
   new name.

During review of the iSCSI hostdev series, eblake noted that the
prototypes shouldn't have the extranenous space between the "*" and
the function name:

http://www.redhat.com/archives/libvir-list/2014-July/msg01227.html

Since it was more invasive than 1 or 2 lines - I said I'd send a
patch covering this once committed.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Use better detection of hugetlbfs mount points. Yes, there can be
multiple mount points each serving different huge page size.

Since we already have ability to override the mount point in the
qemu.conf file, this crazy backward compatibility code is brought in.
Now we allow multiple mount points, so the "hugetlbfs_mount" option
must take an list of strings (mount points). But previously, it was
just a string, so we must accept both types now.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

For now, we set the migration URI via command line '--migrate_uri' or
construct the URI by looking up the dest host's hostname which could be
solved by DNS automatically.

But in cases the dest host have two or more NICs to reach, we may need to
send the migration data over a specific NIC which is different from the
automatically resolved one for some reason like performance, security, etc.
Thus we must explicitly specify the migrateuri in command line everytime,
but it is too troublesome if there are many such hosts (and don't forget
virt-manager).

This patch adds a configuration file option on dest host to save the
default value set which can be specified to a migration hostname or
one of this host's addresses used for transferring data, thus user doesn't
have to specify it in command line everytime.
Signed-off-by: NChen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

QEMU commit 5e2ac51 added a boolean '-msg timestamp=[on|off]'
option, which can enable timestamps on errors:
$ qemu-system-x86_64 -msg timestamp=on zghhdorf
2014-04-09T13:25:46.779484Z qemu-system-x86_64: -msg timestamp=on: could
not open disk image zghhdorf: Could not open 'zghhdorf': No such file or
directory

Enable this timestamp if the QEMU binary supports it.

Add a 'log_timestamp' option to qemu.conf for disabling this behavior.

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Specify which driver and which domain in used_by area to avoid conflict among
different drivers.
Signed-off-by: NChunyan Liu <cyliu@suse.com>

All the data for getting the actual type is present in the snapshot
config. There is no need to have this function private to the qemu
driver and it will be re-used later in other parts of libvirt

All the data for getting the actual type is present in the domain
config. There is no need to have this function private to the qemu
driver and it will be re-used later in other parts of libvirt

Leave virDomainEventRegister and its Deregister brother as these are
legacy functions only for domain lifecycle events.

Before this patch, the translation function still needs a second ugly
helper function to actually format the command line for qemu. But if we
do the right stuff in the translation function, we don't have to bother
with the second function any more.

This patch removes the messy qemuBuildVolumeString function and changes
qemuTranslateDiskSourcePool to set stuff up correctly so that the
regular code paths meant for volumes can be used to format the command
line correctly.

For this purpose a new helper "qemuDiskGetActualType()" is introduced to
return the type of the volume in a pool.

As a part of the refactor the qemuTranslateDiskSourcePool function is
fixed to do decisions based on the pool type instead of the volume type.
This allows to separate pool-type-specific stuff more clearly and will
ease addition of other pool types that will require certain other
operations to get the correct pool source.

The previously fixed tests should make sure that we don't break stuff
that was working before.

To avoid future pain, add placeholder functions to get the actual
snapshot disk type.

https://bugzilla.redhat.com/show_bug.cgi?id=1019053

https://bugzilla.redhat.com/show_bug.cgi?id=1019053

When we migrate vms concurrently, there's a chance that libvirtd on
destination assigns the same port for different migrations, which will
lead to migration failure during prepare phase on destination. So we use
virPortAllocator here to solve the problem.
Signed-off-by: NWang Yufei <james.wangyufei@huawei.com>
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

QEMU has support for SASL auth for SPICE guests, but libvirt
has no way to enable it. Following the example from VNC where
it is globally enabled via qemu.conf
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The regular save image code has the support to compress images using a
specified algorithm. This was not implemented for external checkpoints
although it shares most of the backend code.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1017227

This configuration knob is there to override default listen address for
-incoming for all qemu domains.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

If qemuParseCommandLine finds an arg it does not understand
it adds it to the QEMU passthrough custom arg list. If the
qemuParseCommandLine method hits an error for any reason
though, it just does 'VIR_FREE(cmd)' on the custom arg list.
This means all actual args / env vars are leaked. Introduce
a qemuDomainCmdlineDefFree method to be used for cleanup.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

On my machine, a guest fails to boot if it has a sound card, but not
graphical device/display is configured, because pulseaudio fails to
initialize since it can't access $HOME.

A workaround is removing the audio device, however on ARM boards there
isn't any option to do that, so -nographic always fails.

Set QEMU_AUDIO_DRV=none if no <graphics> are configured. Unfortunately
this has massive test suite fallout.

Add a qemu.conf parameter nographics_allow_host_audio, that if enabled
will pass through QEMU_AUDIO_DRV from sysconfig (similar to
vnc_allow_host_audio)

Enforce the rule that .h files don't need to (redundantly)
include <config.h>.

* cfg.mk (sc_prohibit_config_h_in_headers): New rule.
(_virsh_includes): Delete; instead, inline a smaller number of
exclusions...
(exclude_file_name_regexp--sc_require_config_h)
(exclude_file_name_regexp--sc_require_config_h_first): ...here.
* daemon/libvirtd.h (includes): Fix offenders.
* src/driver.h (includes): Likewise.
* src/gnutls_1_0_compat.h (includes): Likewise.
* src/libxl/libxl_conf.h (includes): Likewise.
* src/libxl/libxl_driver.h (includes): Likewise.
* src/lxc/lxc_conf.h (includes): Likewise.
* src/lxc/lxc_driver.h (includes): Likewise.
* src/lxc/lxc_fuse.h (includes): Likewise.
* src/network/bridge_driver.h (includes): Likewise.
* src/phyp/phyp_driver.h (includes): Likewise.
* src/qemu/qemu_conf.h (includes): Likewise.
* src/util/virnetlink.h (includes): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

A cygwin build of the qemu driver fails with:

qemu/qemu_process.c: In function 'qemuPrepareCpumap':
qemu/qemu_process.c:1803:31: error: 'CPU_SETSIZE' undeclared (first use in this function)

CPU_SETSIZE is a Linux extension in <sched.h>; a bit more portable
is using sysconf if _SC_NPROCESSORS_CONF is defined (several platforms
have it, including Cygwin).  Ultimately, I would have preferred to
use gnulib's 'nproc' module, but it is currently under an incompatible
license.

* src/qemu/qemu_conf.h (QEMUD_CPUMASK_LEN): Provide definition on
cygwin.
Signed-off-by: NEric Blake <eblake@redhat.com>

Just like what previous patches do, it refactors qemuSetUnprivSGIO
to take the virDomainDeviceDefPtr as argument instead.

unpriv_sgio setting is tight with the shared device helpers, let's
put them together in qemu_conf.c

This changes the helpers qemu{Add,Remove}SharedDisk into
qemu{Add,Remove}SharedDevice, as most of the code in the helpers
can be reused for scsi host device.

To track the shared scsi host device, first it finds out the
device path (e.g. /dev/s[dr]*) which is mapped to the sg device,
and use device ID of the found device path (/dev/s[dr]*) as the
hash key. This is because of the device ID is not unique between
between /dev/s[dr]* and /dev/sg*, e.g.

% sg_map
/dev/sg0  /dev/sda
/dev/sg1  /dev/sr0

% ls -l /dev/sda
brw-rw----. 1 root disk 8, 0 May  2 19:26 /dev/sda

%ls -l /dev/sg0
crw-rw----. 1 root disk 21, 0 May  2 19:26 /dev/sg0