- 24 11月, 2011 9 次提交
-
-
由 Jiri Denemark 提交于
Since virsh already implements event loop, it has to also run it. So far the event loop was only running during virsh console command.
-
由 Jiri Denemark 提交于
virConnectSetKeepAlive public API can be used by a client connecting to remote server to start using keepalive protocol. The API is handled directly by remote driver and not transmitted over the wire to the server.
-
由 Jiri Denemark 提交于
These APIs are used by both client and server RPC layer to handle processing of keepalive messages.
-
由 Jiri Denemark 提交于
The keepalive program has two procedures: PING, and PONG. Both are used only in asynchronous messages and the sender doesn't wait for any reply. However, the party which receives PING messages is supposed to react by sending PONG message the other party, but no explicit binding between PING and PONG messages is made. For backward compatibility neither server nor client are allowed to send keepalive messages before checking that remote party supports them.
-
由 Jiri Denemark 提交于
-
由 Jiri Denemark 提交于
When virNetClientIOEventLoop is called for a non-blocking call and not even a single byte can be sent from this call without blocking, we properly reported that to the caller which properly frees the call. But we never removed the call from a call queue.
-
由 Jiri Denemark 提交于
-
由 Jiri Denemark 提交于
-
由 Stefan Berger 提交于
Remove the virConnectPtr from the nwfilter's internal API calls as far as possible.
-
- 23 11月, 2011 19 次提交
-
-
由 Peter Krempa 提交于
If something fails while initializing qemu job object in qemuDomainObjPrivateAlloc(), memory to the private pointer is freed, but after that, the pointer is still dereferenced, which may result in a segfault. * qemuDomainObjPrivateAlloc() - Don't dereference NULL pointer.
-
由 Eric Blake 提交于
Generally, functions which return malloc'd strings should be typed as 'char *', not 'const char *', to make it obvious that the caller is responsible to free things. free(const char *) fails to compile, and although we have a cast embedded in VIR_FREE to work around poor code that frees const char *, it's better to not rely on that hack. * src/qemu/qemu_driver.c (qemuDiskPathToAlias): Change return type. (qemuDomainBlockJobImpl): Update caller.
-
由 Eric Blake 提交于
Given that we can now handle the target's disk shorthand, in addition to an absolute path to the file or block device used on the host, the term 'disk' fits a bit better as the parameter name than 'path'. * include/libvirt/libvirt.h.in: Update some parameter names. * src/libvirt.c (virDomainBlockStats, virDomainBlockStatsFlags) (virDomainBlockPeek, virDomainGetBlockInfo, virDomainBlockJobAbort) (virDomainGetBlockJobInfo, virDomainBlockJobSetSpeed) (virDomainBlockPull): Likewise.
-
由 Eric Blake 提交于
Commit 89b6284f made it possible to pass either a source name or the target device to most API demanding a disk designation, but forgot to update the documentation. It also failed to update virDomainBlockStats to take both forms. This patch fixes both the documentation and the remaining function. Xen continues to use just device shorthand (that is, I did not implement path lookup there, since xen does not track a domain_conf to quickly tie a path back to the device shorthand). * src/libvirt.c (virDomainBlockStats, virDomainBlockStatsFlags) (virDomainGetBlockInfo, virDomainBlockPeek) (virDomainBlockJobAbort, virDomainGetBlockJobInfo) (virDomainBlockJobSetSpeed, virDomainBlockPull): Document acceptable disk naming conventions. * src/qemu/qemu_driver.c (qemuDomainBlockStats) (qemuDomainBlockStatsFlags): Allow lookup by source name. * src/test/test_driver.c (testDomainBlockStats): Likewise.
-
由 Michal Privoznik 提交于
Latest nwfilter patch ad6c67cf introduced uninitialized return value. This was spotted by 4.6.2 gcc.
-
由 Daniel P. Berrange 提交于
The WITH_VIRTUALPORT macro is defined to 0 when disabled, not left undefined. So #if must be used instead of #ifdef * src/util/virnetdevvportprofile.c: s/#ifdef/#if/
-
由 Daniel P. Berrange 提交于
* src/nwfilter/nwfilter_learnipaddr.c: Initialize ret variable
-
由 Michal Prívozník 提交于
Up to now users have to give a full XML description on input when device-detaching. If they omitted something it lead to unclear error messages (like generated MAC wasn't found, etc.). With this patch users can specify only those information which specify one device sufficiently precise. Remaining information is completed from domain.
-
由 Stefan Berger 提交于
In preparation of DHCP Snooping and the detection of multiple IP addresses per interface: The hash table that is used to collect the detected IP address of an interface can so far only handle one IP address per interface. With this patch we extend this to allow it to handle a list of IP addresses. Above changes the returned variable type of virNWFilterGetIpAddrForIfname() from char * to virNWFilterVarValuePtr; adapt all existing functions calling this function.
-
由 Eli Qiao 提交于
Signed-off-by: NEli Qiao <taget@linux.vnet.ibm.com> When configuring a URI alias like this in 'libvirt.conf': uri_aliases = [ "jj#j=qemu+ssh://root@127.0.0.1/system", "sleet=qemu+ssh://root@sleet.cloud.example.com/system", ] virsh -c jj#j It will show this error message: 'no connection driver available for No connection for URI jj#j' Actually,we expect this message below: Malformed 'uri_aliases' config entry 'jj#j=qemu+ssh://root@127.0.0.1/system', aliases may only contain 'a-Z, 0-9, _, -' Give this patch to fix this error.
-
由 Stefan Berger 提交于
In preparation for the DHCP Snooping code: Pass an additional parameter into the applyDHCPOnly function of the 'techdriver'.
-
由 Stefan Berger 提交于
Introduce a shell variable 'IBT' to invoke the ip(6)tables command. Tested with libvirt-tck.
-
由 Stefan Berger 提交于
Introduce a shell variable 'EBT' to invoke the ebtables command. Hard-code the used ebtables table to '-t nat'. Tested with libvirt-tck.
-
由 Stefan Berger 提交于
Display the executed command and failure message if a command failed to execute. Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
-
由 Stefan Berger 提交于
Add documentation for the STP filtering support. Describe the XML attributes that are supported. Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
-
由 Stefan Berger 提交于
This patch adds a few test cases for the XML parsing of STP filtering nodes. Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
-
由 Stefan Berger 提交于
This patch adds support for filtering of STP (spanning tree protocol) traffic to the parser and makes us of the ebtables support for STP filtering. This code now enables the filtering of traffic in chains with prefix 'stp'. Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
-
由 Stefan Berger 提交于
With hunks borrowed from one of David Steven's previous patches, we now add the capability of having a 'mac' chain which is useful to filter for multiple valid MAC addresses. Signed-off-by: NDavid L Stevens <dlstevens@us.ibm.com> Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
-
由 Eric Blake 提交于
* docs/formatcaps.html.in: Avoid run-on sentence, wrap lines.
-
- 22 11月, 2011 6 次提交
-
-
由 Daniel P. Berrange 提交于
On Mingw32 the ffs() function was not declared due to missing header include * src/conf/capabilities.c: The ffs() function lives in strings.h
-
由 Osier Yang 提交于
Add Chang Liu to the AUTHORS' list.
-
由 Chang Liu 提交于
virStorageBackendLogicalDeleteVol() could not remove the lv with error "could not remove open logical volume" sometimes. Generally it's caused by the volume is still active, even if lvremove tries to remove it with option "--force". This patch is to fix it by disbale the lv first using "lvchange -aln" and "lvremove -f" afterwards if the direct "lvremove -f" failed.
-
由 Srivatsa S. Bhat 提交于
This patch exports KVM Host Power Management capabilities as XML so that higher-level systems management software can make use of these features available in the host. The script "pm-is-supported" (from pm-utils package) is run to discover if Suspend-to-RAM (S3) or Suspend-to-Disk (S4) is supported by the host. If either of them are supported, then a new tag "<power_management>" is introduced in the XML under the <host> tag. However in case the query to check for power management features succeeded, but the host does not support any such feature, then the XML will contain an empty <power_management/> tag. In the event that the PM query itself failed, the XML will not contain any "power_management" tag. To use this, new APIs could be implemented in libvirt to exploit power management features such as S3/S4.
-
由 Eric Blake 提交于
None of the callers cared if str was updated to point to the next byte after the parsed cpuset; simplifying this results in quite a few code simplifications. Additionally, virCPUDefParseXML was strdup()'ing a malloc()'d string; avoiding a memory copy resulted in less code. * src/conf/domain_conf.h (virDomainCpuSetParse): Alter signature. * src/conf/domain_conf.c (virDomainCpuSetParse): Don't modify str. (virDomainVcpuPinDefParseXML, virDomainDefParseXML): Adjust callers. * src/conf/cpu_conf.c (virCPUDefParseXML): Likewise. * src/xen/xend_internal.c (sexpr_to_xend_topology): Likewise. * src/xen/xm_internal.c (xenXMDomainPinVcpu): Likewise. * src/xenxs/xen_sxpr.c (xenParseSxpr): Likewise. * src/xenxs/xen_xm.c (xenParseXM): Likewise.
-
由 Roopa Prabhu 提交于
For direct attach devices, in qemuBuildCommandLine, we seem to be freeing actual device on error path (with networkReleaseActualDevice). But the actual device is not deleted. qemuProcessStop eventually deletes the direct attach device and releases actual device. But by the time qemuProcessStop is called qemuBuildCommandLine has already freed actual device, leaving stray macvtap devices behind on error. So the simplest fix is to remove the networkReleaseActualDevice in qemuBuildCommandLine. This patch does just that. Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com>
-
- 21 11月, 2011 4 次提交
-
-
由 Michal Privoznik 提交于
Now, when we support multiple consoles per domain, the vm->def->console[0] can still remain an alias for vm->def->serial[0]; However, we need to copy it's source definition as well otherwise we'll regress on virDomainOpenConsole.
-
由 Daniel P. Berrange 提交于
* src/Makefile.am: Remove libvirt_bridge.syms and libvirt_macvtap.syms from EXTRA_DIST. Add libvirt_dbus.syms
-
由 Daniel P. Berrange 提交于
Mingw32 complains if you request export of a symbol which does not in fact exist. * src/libvirt_bridge.syms, src/libvirt_macvtap.syms: Delete obsolete files * src/libvirt_private.syms: Remove virNetServerGetDBusConn * src/libvirt_dbus.syms: Add virNetServerGetDBusConn
-
由 Osier Yang 提交于
lvs outputs "[$lvname_vorigin]" for the virtual snapshot lv (created with "--virtualsize"), and the original device pointed by "$lvname_vorigin" is just for lvm internal use, one should never use it. Per lvm's nameing rules, "[" is not valid as part of the vg/lv name. (man 8 lvm). <quote> VALID NAMES The following characters are valid for VG and LV names: a-z A-Z 0-9 + _ . - VG and LV names cannot begin with a hyphen. There are also various reserved names that are used internally by lvm that can not be used as LV or VG names. A VG cannot be called anything that exists in /dev/ at the time of creation, nor can it be called '.' or '..'. A LV cannot be called '.' '..' 'snapshot' or 'pvmove'. The LV name may also not con‐ tain the strings '_mlog' or '_mimage' </quote> So we can skip the set the lv's backingStore by checking if the name begins with a "[".
-
- 19 11月, 2011 2 次提交
-
-
由 Stefan Berger 提交于
Add documentation for the VLAN filtering support. Describe the XML attributes that are supported. Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
-
由 Stefan Berger 提交于
This patch adds a few test cases for the XML parsing of VLAN filtering nodes. Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
-