- 15 4月, 2016 5 次提交
-
-
由 Cole Robinson 提交于
Added with commit 3b431929 in v1.2.2 but never documented https://bugzilla.redhat.com/show_bug.cgi?id=1313613
-
由 Cole Robinson 提交于
We use device-mapper to enumerate all dm devices, and filter out the list of multipath devices by checking the target_type string name. The code however cancels all scanning if we encounter target_type=NULL I don't know how to reproduce that situation, but a user was hitting it in their setup, and inspecting the lvm2/device-mapper code shows many places where !target_type is explicitly ignored and processing continues on to the next device. So I think we should do the same https://bugzilla.redhat.com/show_bug.cgi?id=1069317
-
由 Cole Robinson 提交于
The watchdog cli refactoring in 4666b762 dropped the temporary variable we use to convert to action=dump to action=pause for the qemu cli, and stored the converted value in the domain structure. Our other watchdog handling code then treated it as though the user requested action=pause, which broke action=dump handling. Revive the temporary variable to fix things.
-
由 Cole Robinson 提交于
* Add a test for listen=XXX and <listen address=YYY/> collision error * Add an explicit test for listen=XXX duplicated to <listen address=XXX/> We implicitly test it elsewhere but I figure it's better to be explicit, and this test case can be extended in the future for additional listen back compat if/when we support <listen type='socket'/> syntax
-
由 Cole Robinson 提交于
This allows tests to check for specific failure scenarios
-
- 14 4月, 2016 11 次提交
-
-
由 Ján Tomko 提交于
In qemuHotplugCreateObjects, the ret variable was filled by the value returned by qemuTestCapsCacheInsert. If any of the functions after this assignment failed, we would still return success. Also adjust testCompareXMLToArgvHelper, where this change is just cosmetic, because the value was overwritten right away.
-
由 ShaoHe Feng 提交于
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
-
由 Nikolay Shirokovskiy 提交于
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
-
由 Eli Qiao 提交于
Signed-off-by: NEli Qiao <liyong.qiao@intel.com> Signed-off-by: NShaoHe Feng <shaohe.feng@intel.com> Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
-
由 ShaoHe Feng 提交于
Signed-off-by: NShaoHe Feng <shaohe.feng@intel.com> Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
-
由 Nikolay Shirokovskiy 提交于
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
-
由 Nikolay Shirokovskiy 提交于
Upcoming compression options for migration command patch series hits current limit of 32 possible options for a command. Lets take one step further and support 64 possible options. And all it takes is moving from 32 bit integers to 64 bit ones. The only less then trivial change i found is moving from 'ffs' to 'ffsl'. Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
-
由 Martin Kletzander 提交于
I tried compiling libvirt with older gcc and probably because I used different configure options I got some shadowed declarations. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Chunyan Liu 提交于
Add codes to support creating domain with network defition of assigning SRIOV VF from a pool. Signed-off-by: NChunyan Liu <cyliu@suse.com> Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
由 Maxim Nestratov 提交于
commit 30c61901 added new functions to libvirt_private.syms not alpabetically sorted and erroneously added vz sources to STATEFUL_DRIVER_SOURCE_FILES, which triggered check-aclrules running while vz driver isn't ready for it yet. Pushing under build-breaker rule. Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>
-
由 Nikolay Shirokovskiy 提交于
SDK does not allocate memory when getting strings thus we need to call every function that returns string twice. First to obtain string length, second to obtain string itself. It is tedious so let's create helper functions for cases when we know length of the result beforehand and we are not. Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
-
- 13 4月, 2016 24 次提交
-
-
由 Maxim Nestratov 提交于
remove unnecessary vzConnectClose prototype and make local structure vzDomainDefParserConfig be static Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>
-
由 Maxim Nestratov 提交于
We don't need them anymore as all pointers within vzDriver structure are not changed during the time it exists. Where we still need to synchronize we use virObjectLock/Unlock as far as vzDriver is lockable object. Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>
-
由 Maxim Nestratov 提交于
Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>
-
由 Maxim Nestratov 提交于
Lock driver when a new domain is created in prlsdkNewDomainByHandle and try to find it in the list under lock again because it can race with vzDomainDefineXMLFlags when a domain with the same uuid is added via vz dispatcher directly and libvirt define. Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>
-
由 Maxim Nestratov 提交于
This patch introduces a new 'vzDriver' lockable object and provides helper functions to allocate/destroy it and we pass it to prlsdkXxx functions instead of virConnectPtr. Now we store domain related objects such as domain list, capabitilies etc. within a single vz_driver vzDriver structure, which is shared by all driver connections. It is allocated during daemon initialization or in a lazy manner when a new connection to 'vz' driver is established. When a connection to vz daemon drops, vzDestroyConnection is called, which in turn relays disconnect event to all connection to 'vz' driver. Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>
-
由 Maxim Nestratov 提交于
Make it possible to build vz driver as a module and don't link it with libvirt.so statically. Remove registering it on client's side as far as we start relying on daemon Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>
-
由 Pavel Hrdina 提交于
GCC in RHEL-6 complains about listen: ../../src/conf/domain_conf.c:23718: error: declaration of 'listen' shadows a global declaration [-Wshadow] /usr/include/sys/socket.h:204: error: shadowed declaration is here [-Wshadow] This renames all the listen to gListen. Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Mikhail Feoktistov 提交于
Virtuozzo hypervisor supports native iomode. So we should allow to add disk with iomode "native" or "default".
-
由 Cole Robinson 提交于
Trying to reload/SIGUSR1 virtlogd or virtlockd fails with: error : virNetDaemonRun:747 : internal error: Not all servers restored, cannot run server Commit 252610f7 changed the daemon state json to allow tracking multiple servers. However it missed clearing dmn->srvObject after the json is empty, like the previous code paths handled. Later on in virNewDaemonRun, dmn->srvObject is expected to be empty otherwise we throw the above error. https://bugzilla.redhat.com/show_bug.cgi?id=1311013
-
由 Ján Tomko 提交于
Mock virNetDevRunEthernetScript instead. This restores the VIR_TEST_REGENERATE_OUTPUT functionality.
-
由 Ján Tomko 提交于
This is just a wrapper for virCommand that takes two strings and runs them. Move it to virnetdev.c for easier mocking.
-
由 Peter Krempa 提交于
Since qemu is now able to notify us that the guest rejected the memory unplug operation we can relay this to the user and make the API fail right away. Additionally document the possible values from the ACPI docs for future reference. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1320447
-
由 Peter Krempa 提交于
The event is emitted on ACPI OSPM Status Indication events. ACPI standard documentation describes the method as: This object is an optional control method that is invoked by OSPM to indicate processing status to the platform. During device ejection, device hot add, or other event processing, OSPM may need to perform specific handshaking with the platform. OSPM may also need to indicate to the platform its inability to complete a requested operation; for example, when a user presses an ejection button for a device that is currently in use or is otherwise currently incapable of being ejected. In this case, the processing of the ACPI Eject Request notification by OSPM fails. OSPM may indicate this failure to the platform through the invocation of the _OST control method. As a result of the status notification indicating ejection failure, the platform may take certain action including reissuing the notification or perhaps turning on an appropriate indicator light to signal the failure to the user.
-
由 Peter Krempa 提交于
Since we didn't opt to use one single event for device lifecycle for a VM we are missing one last event if the device removal failed. This event will be emitted once we asked to eject the device but for some reason it is not possible.
-
由 Peter Krempa 提交于
Similarly to the DEVICE_DELETED event we will be able to tell when unplug of certain device types will be rejected by the guest OS. Wire up the device deletion signalling code to allow handling this.
-
由 Peter Krempa 提交于
No need to keep two separate conditions. A slight juggling of return values is needed to accomodate virDomainObjWaitUntil.
-
由 Peter Krempa 提交于
Neither of the callers cares whether the DEVICE_DELETED event isn't supported or the event was received. Simplify the code and callers by unifying the two values and changing the return value constants so that a temporary variable can be omitted.
-
由 Peter Krempa 提交于
Callers ignore if this function returns -1 and continue as though the DEVICE_DELETED event was not received. Since we can't be sure that the event was not received we should behave as if the event was not supported and remove the device definition right away. The error fortunately won't really happen here.
-
由 Ján Tomko 提交于
The address assigning code might add new pci bridges. We need them to have an alias when building the command line. In real word usage, this is not a problem because all the code paths already call qemuDomainAssignAddresses. However moving this call lets us remove one extra call from qemuxml2argvtest.
-
由 Ján Tomko 提交于
It is only used for failed address allocation Since we already have FLAG_EXPECT_FAILURE, use that instead. Also unify the output to print the whole log buffer instead of just the last error message.
-
由 Ján Tomko 提交于
After removing qemuBuildCommandLineCallbacks, testutilsqemu.h does not need to include qemu_command.h. Include just qemu_conf.h here and qemu_domain_address.h in files that need it.
-
由 Pavel Hrdina 提交于
Instead of calling the virDomainGraphicsListensParseXML function for all graphics types and ignore the wrong ones move the call only to graphics types where we supports listen elements. Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Pavel Hrdina 提交于
Those are the last two places that uses the getter functions. Use a direct access instead and remove those getters. Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-