For a while now there are two places that gather information about NUMA
related guest configuration. While the XML can't be changed we can at
least store the data in one place in the definition.

Rename the numatune_conf.[ch] files to numa_conf as later patches will
move the rest of the definitions from the cpu definition to this one.

The "virDomainGetInfo" will get for running domain only live info and for
offline domain only config info. There was no way how to get config info
for running domain. We will use "vshCPUCountCollect" instead to get the
correct cpu count that we need to pass to "virDomainGetVcpuPinInfo".

Also cleanup some unnecessary variables and checks that are done by
drivers.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1160559Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Not all machine types support all devices, device properties, backends,
etc. So until we create a matrix of [machineType, qemuCaps], lets just
filter out some capabilities before we return them to the consumer
(which is going to make decisions based on them straight away).
Currently, as qemu is unable to tell which capabilities are (not)
enabled for given machine types, it's us who has to hardcode the matrix.
One day maybe the hardcoding will go away and we can create the matrix
dynamically on the fly based on a few monitor calls.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

It will come handy in the near future when we will filter some
capabilities based on it.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

When editing a domain with 'virsh edit' and failing validation, the
usual message pops up:

  Failed. Try again? [y,n,f,?]:

Turning off validation can be useful, mainly for testing (but other
purposes too), so this patch adds support for relaxing definition in
virsh-edit and makes 'virsh edit <domain>' more usable.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

1. Delete all boot devices for VM instance
2. Find the first HDD from XML and set it as bootable

Now we support only one boot device and it should be HDD.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Not all files we want to find using virFileFindResource{,Full} are
generated when libvirt is built, some of them (such as RNG schemas) are
distributed with sources. The current API was not able to find source
files if libvirt was built in VPATH.

Both RNG schemas and cpu_map.xml are distributed in source tarball.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1179678

When migrating with storage, libvirt iterates over domain disks and
instruct qemu to migrate the ones we are interested in (shared, RO and
source-less disks are skipped). The disks are migrated in series. No
new disk is transferred until the previous one hasn't been quiesced.
This is checked on the qemu monitor via 'query-jobs' command. If the
disk has been quiesced, it practically went from copying its content
to mirroring state, where all disk writes are mirrored to the other
side of migration too. Having said that, there's one inherent error in
the design. The monitor command we use reports only active jobs. So if
the job fails for whatever reason, we will not see it anymore in the
command output. And this can happen fairly simply: just try to migrate
a domain with storage. If the storage migration fails (e.g. due to
ENOSPC on the destination) we resume the host on the destination and
let it run on partly copied disk.

The proper fix is what even the comment in the code says: listen for
qemu events instead of polling. If storage migration changes state an
event is emitted and we can act accordingly: either consider disk
copied and continue the process, or consider disk mangled and abort
the migration.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Upon BLOCK_JOB_COMPLETED event delivery, we check if the job has
completed (in qemuMonitorJSONHandleBlockJobImpl()). For better image,
the event looks something like this:

"timestamp": {"seconds": 1423582694, "microseconds": 372666}, "event":
"BLOCK_JOB_COMPLETED", "data": {"device": "drive-virtio-disk0", "len":
8412790784, "offset": 409993216, "speed": 8796093022207, "type":
"mirror", "error": "No space left on device"}}

If "len" does not equal "offset" it's considered an error, and we can
clearly see "error" field filled in. However, later in the event
processing this case was handled no differently to case of job being
aborted via separate API. It's time that we start differentiate these
two because of the future work.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Currently, upon BLOCK_JOB_* event, disk->mirrorState is not updated
each time. The callback code handling the events checks if a blockjob
was started via our public APIs prior to setting the mirrorState.
However, some block jobs may be started internally (e.g. during
storage migration), in which case we don't bother with setting
disk->mirror (there's nothing we can set it to anyway), or other
fields. But it will come handy if we update the mirrorState in these
cases too. The event wasn't delivered just for fun - we've started the
job after all.

So, in this commit, the mirrorState is set to whatever job status
we've obtained. Of course, there are some actions on some statuses
that we want to perform. But instead of if {} else if {} else {} ...
enumeration, let's move to switch().
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Commit e105dc98 moved some code but
didn't adjust the jump labels so that the job would be terminated.

Libvirt could crash with segfault if user issue "service reload" right
after "service start". One possible way to crash libvirt is to run reload
during initialization of QEMU driver.

It could happen when qemu driver will initialize qemu_driver_lock but
don't have a time to set it's "config" and the SIGHUP arrives. The
reload handler tries to get qemu_drv->config during "virStorageAutostart"
and dereference it which ends with segfault.

Let's ignore all reload requests until all drivers are initialized. In
addition set driversInitialized before we enter virStateCleanup to
ignore reload request while we are shutting down.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1179981Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

All the addresses from the range are used, not just those
that are in use on the host.

https://bugzilla.redhat.com/show_bug.cgi?id=1079917

Introduce some basic docs describing the virtlockd setup.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

In preparation for adding docs about virtlockd, split out
the sanlock setup docs into a separate page.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

If 'virNumaGetHostNodeset()' fails then the error path will try to free
uninitialized pointer mem_mask. Introduced by commit af2a1f05.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

PowerPC : Forbid NULL CPU model with 'host-model' mode in qemu command line.

This ensures that an XML such as following:
...
  <cpu mode='host-model'>
    <model fallback='allow'/>
  </cpu>
...

will not generate a '-cpu host,compat=(null)' command line with qemu-system-ppc64.
Signed-off-by: NPrerna Saxena <prerna@linux.vnet.ibm.com>

PowerPC : Explicitly associate 'qemu-system-ppc64' as the
 default emulator for all 64-bit PowerPC guests ( both Big & Little Endian )
Signed-off-by: NPrerna Saxena <prerna@linux.vnet.ibm.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1126762

Commit 43b67f introduced a deadlock issue when we use numatune
to change numa settings to a vm in session mode.

Jump to endjob instead of jump to cleanup.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>

So, when building the '-numa' command line, the
qemuBuildMemoryBackendStr() function does quite a lot of checks to
chose the best backend, or to check if one is in fact needed. However,
it returned that backend is needed even for this little fella:

  <numatune>
    <memory mode="strict" nodeset="0,2"/>
  </numatune>

This can be guaranteed via CGroups entirely, there's no need to use
memory-backend-ram to let qemu know where to get memory from. Well, as
long as there's no <memnode/> element, which explicitly requires the
backend. Long story short, we wouldn't have to care, as qemu works
either way. However, the problem is migration (as always). Previously,
libvirt would have started qemu with:

  -numa node,memory=X

in this case and restricted memory placement in CGroups. Today, libvirt
creates more complicated command line:

  -object memory-backend-ram,id=ram-node0,size=X
  -numa node,memdev=ram-node0

Again, one wouldn't find anything wrong with these two approaches.
Both work just fine. Unless you try to migrated from the older libvirt
into the newer one. These two approaches are, unfortunately, not
compatible. My suggestion is, in order to allow users to migrate, lets
use the older approach for as long as the newer one is not needed.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Well, we can pretend that we've asked numad for its suggestion and let
qemu command line be built with that respect. Again, this alone has no
big value, but see later commits which build on the top of this.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This function is going to be needed in the near future.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Just like the fix for domdisplay in commit 1ba815.

Periodically my Coverity scan will return a checked_return failure
for libxlDomainShutdownThread call to libxlDomainStart. Followed the
libxlAutostartDomain example in order to check the status, emit a
message, and continue on.

Introduced by commit id 'c3d9d3bb' - return from virSecurityManagerCheckModel
wasn't VIR_FREE()'ing the virSecurityManagerGetNested allocated memory.

Jumping to the cleanup label prior to starting the container failed to
properly clean everything up that is handled by the virLXCProcessCleanup
which is called if virLXCProcessStop is called on failure after the
container properly starts. Most importantly is prior to this patch none
of the stop/release hooks, host device reattachment, and network cleanup
(that is reverse of virLXCProcessSetupInterfaces).
Signed-off-by: NLuyao Huang <lhuang@redhat.com>

Modify the VIR_DEBUG message in virLXCProcessCleanup to make it clearer
about the path.  Also add some more VIR_DEBUG messages in virLXCProcessStart
in order to help debug error flow.

https://bugzilla.redhat.com/show_bug.cgi?id=1176503

Move the two console checks - one for zero nconsoles present and the
other for an invalid console type to earlier in the processing rather than
getting after performing some setup that has to be undone for what amounts
to an invalid configuration.

This resolves the above bug since it's not not possible to have changed
the security labels when we cause the configuration check failure.

if (mgr == NULL || mgr->drv == NULL)
    return ret;

This check isn't really necessary, security manager cannot be a NULL
pointer as it is either selinux (by default) or 'none', if no other driver is
set in the config. Even with no config file driver name yields 'none'.

The other hunk checks for domain's security model validity, but we should
also check devices' security model as well, therefore this hunk is moved into
a separate function which is called by virSecurityManagerCheckAllLabel that
checks both the domain's security model and devices' security model.

https://bugzilla.redhat.com/show_bug.cgi?id=1165485Signed-off-by: NJán Tomko <jtomko@redhat.com>

We do have a check for valid per-domain security model, however we still
do permit an invalid security model for a domain's device (those which
are specified with <source> element).
This patch introduces a new function virSecurityManagerCheckAllLabel
which compares user specified security model against currently
registered security drivers. That being said, it also permits 'none'
being specified as a device security model.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1165485Signed-off-by: NJán Tomko <jtomko@redhat.com>

<interface ...>
  ...
  <model type='virtio'/>
  <driver ...>
    <host mrg_rxbuf='off'/>
  </driver>
</interface>

will result in:
-device virtio-net-pci,mrg_rxbuf=off,...

https://bugzilla.redhat.com/show_bug.cgi?id=1186886

Add an XML attribute to allow disabling merge of rx buffers
on the host:
<interface ...>
  ...
  <model type='virtio'/>
  <driver ...>
    <host mrg_rxbuf='off'/>
  </driver>
</interface>

https://bugzilla.redhat.com/show_bug.cgi?id=1186886

Our hotplug code supports macvtap insertion to guests. However, we
somehow forgot about 'attach-interface' (which tries to build XML from
passed arguments and use virDomainAttachDeviceFlags()).
New type is accessible under 'direct' type, to keep the same type as
used in domain XML.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Instead of verbose string to enum conversion (if STREQ() else if
STREQ() else if STREQ() ...) lets use virDomainNetType{From,To}String.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The type of interface to attach is held in the variable 'typ'.
Depending on interface type selected by user, the variable is set
either to 1 (network), or 2 (bridge). Lets use already existing
enum from domain_conf.h instead: virDomainNetType.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The enum converters are defined in the domain_conf.h (so
accessible widely across the code), but on the symbol layer, only
virDomainNetTypeToString was exposed. However, FromString variant
is going to be needed shortly.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Commit b6a2828e introduced new functions to set process scheduler. There
is a small typo in ELSE path for systems where scheduler is not
available.

Also some of the definitions were introduced later in kernel. For
example RHEL-5 is running on kernel 2.6.18, but SCHED_IDLE was introduces
in 2.6.23 [1] and SCHED_BATCH in 2.6.16 [1]. We should not count only on
existence of function sched_setscheduler(), we must also check for
existence of used macros as they might not be defined.

[1] see 'man 7 sched'
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

not yet not -> not yet.
Signed-off-by: NZhang Bo <oscar.zhangbo@huawei.com>