- 23 5月, 2018 1 次提交
-
-
由 Filip Alac 提交于
Introduce support for codec type 'output' ('hda-output' in QEMU) for ich6 and ich9 sound devices, which only advertises a line-out in the guest. This has been available in QEMU since 0.14. Signed-off-by: NFilip Alac <filipalac@gmail.com> Reviewed-by: NErik Skultety <eskultet@redhat.com>
-
- 17 5月, 2018 1 次提交
-
-
由 Martin Kletzander 提交于
Reported-instead-of-fixing-immediately-by: NJiri Denemark <jdenemar@redhat.com> Signed-off-by: NMartin Kletzander <mkletzan@redhat.com> Reviewed-by: NErik Skultety <eskultet@redhat.com>
-
- 16 5月, 2018 3 次提交
-
-
由 Peter Krempa 提交于
Everything can be disabled by not using the parent element. There's no need to store this explicitly. Additionally it does not add any value since any configuration is dropped if enabled='no' is configured. Drop the attribute and adjust the code accordingly. Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Maciej Wolny 提交于
Signed-off-by: NMaciej Wolny <maciej.wolny@codethink.co.uk>
-
由 Maciej Wolny 提交于
Support OpenGL accelerated rendering when using SDL graphics in the domain config. Add associated test and documentation. Signed-off-by: NMaciej Wolny <maciej.wolny@codethink.co.uk> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
- 15 5月, 2018 3 次提交
-
-
Signed-off-by: NShalini Chellathurai Saroja <shalini@linux.vnet.ibm.com> Reviewed-by: NBoris Fiuczynski <fiuczy@linux.ibm.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
Signed-off-by: NShalini Chellathurai Saroja <shalini@linux.vnet.ibm.com> Reviewed-by: NBjoern Walk <bwalk@linux.ibm.com> Reviewed-by: NBoris Fiuczynski <fiuczy@linux.ibm.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
Introduces the vfio-ccw model for mediated devices and prime vfio-ccw devices such that CCW address will be generated. Alters the qemuxml2xmltest for testing a basic mdev device using vfio-ccw. Signed-off-by: NShalini Chellathurai Saroja <shalini@linux.vnet.ibm.com> Reviewed-by: NBjoern Walk <bwalk@linux.ibm.com> Reviewed-by: NBoris Fiuczynski <fiuczy@linux.ibm.com> Reviewed-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com> Reviewed-by: NStefan Zimmermann <stzi@linux.ibm.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
- 14 5月, 2018 1 次提交
-
-
由 Michal Privoznik 提交于
QEMU has possibility to call madvise(.., MADV_REMOVE) in some cases. Expose this feature to users by new element/attribute discard. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
- 13 5月, 2018 1 次提交
-
-
由 Fabian Freyer 提交于
Signed-off-by: NFabian Freyer <fabian.freyer@physik.tu-berlin.de> Reviewed-by: NRoman Bogorodskiy <bogorodskiy@gmail.com>
-
- 11 5月, 2018 1 次提交
-
-
由 Michal Privoznik 提交于
This is a definition that holds information on SCSI persistent reservation settings. The XML part looks like this: <reservations enabled='yes' managed='no'> <source type='unix' path='/path/to/qemu-pr-helper.sock' mode='client'/> </reservations> If @managed is set to 'yes' then the <source/> is not parsed. This design was agreed on here: https://www.redhat.com/archives/libvir-list/2017-November/msg01005.htmlSigned-off-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
- 04 5月, 2018 3 次提交
-
-
由 Cole Robinson 提交于
Report <features><vmcoreinfo supported='yes'/> if the guest config accepts <features><vmcoreinfo state='on'/> Reviewed-by: NJohn Ferlan <jferlan@redhat.com> Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
由 Cole Robinson 提交于
<features><vmcoreinfo/> is a bare boolean XML property. We don't really use this format anymore and instead prefer tristate <X state=on|off/> since it's required for modeling on/off/default. If for example future qemu started enabling vmcoreinfo by default we wouldn't have any way for the user to turn this off. Convert it to tristate. For writing XML this is semanticly the same, <vmcoreinfo/> is processed as <vmcoreinfo state='on'/>. For apps reading guest XML this is technically an API change, as they might misinterpret <vmcoreinfo state='off'/>, however this has only been present in libvirt since 3.10.0 and I don't think any apps are dependent on this yet Reviewed-by: NJohn Ferlan <jferlan@redhat.com> Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
由 Martin Kletzander 提交于
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
- 03 5月, 2018 2 次提交
-
-
由 Stefan Berger 提交于
Enable the TPM CRB to be specified in the domain XML. This now allows to describe the TPM device like this: <tpm model='tpm-crb'> <backend type='passthrough'> <device path='/dev/tpm0'/> </backend> </tpm> Extend the XML schema to also allow tpm-crb. Extend the documentation. Add a test case for testing the XML parser and formatter. Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Ville Skyttä 提交于
Signed-off-by: NVille Skyttä <ville.skytta@iki.fi>
-
- 02 5月, 2018 4 次提交
-
-
由 Erik Skultety 提交于
Panic device has 2 optional sub-elements - <alias> and <address> the order of which should be interchangeable in the XML. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1456165Signed-off-by: NErik Skultety <eskultet@redhat.com>
-
由 Ján Tomko 提交于
Signed-off-by: NJán Tomko <jtomko@redhat.com>
-
由 Daniel Veillard 提交于
* docs/news.xml: updated for the release Signed-off-by: NDaniel Veillard <veillard@redhat.com>
-
由 Peter Krempa 提交于
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
-
- 27 4月, 2018 1 次提交
-
-
由 Daniel P. Berrangé 提交于
This reverts commit 209d4d6f. The wildcard feature has been temporarily removed pending re-impl. Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
-
- 23 4月, 2018 2 次提交
-
-
由 Andrea Bolognani 提交于
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
-
由 Andrea Bolognani 提交于
The attribute can be used to disable ROM loading completely for a device. This might be needed because, even when the guest is configured such that the PCI ROM will not be loaded in the PCI BAR, some hypervisors (eg. QEMU) might still make it available to the guest in a form (eg. fw_cfg) that some firmwares (eg. SeaBIOS) will consume, thus not achieving the desired result. Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
-
- 20 4月, 2018 1 次提交
-
-
由 Michal Privoznik 提交于
While working on discard feature I've noticed some long lines that should be wrapped. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 19 4月, 2018 1 次提交
-
-
由 Jim Fehlig 提交于
Signed-off-by: NJim Fehlig <jfehlig@suse.com> Reviewed-by: NErik Skultety <eskultet@redhat.com>
-
- 17 4月, 2018 1 次提交
-
-
由 Erik Skultety 提交于
This was pointing to an .html.in file rather than to the intended html document. Signed-off-by: NErik Skultety <eskultet@redhat.com>
-
- 12 4月, 2018 4 次提交
-
-
由 Daniel P. Berrangé 提交于
Currently the virDrvConnectOpen method is supposed to handle both opening an explicit URI and auto-probing a driver if no URI is given. Introduce a dedicated virDrvConnectURIProbe method to enable the probing functionality to be split from the driver opening functionality. It is still possible for NULL to be passed to the virDrvConnectOpen method after this change, because the remote driver needs special handling to enable probing of the URI against a remote libvirtd daemon. Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
-
lxc:///system由 Daniel P. Berrangé 提交于
Historically we have used a bare lxc:/// URI for connecting to LXC. This is different from our practice with QEMU, UML, Parallels, Libxl, BHyve and VirtualBox drivers, which all use a path of '/system' or '/session' or both. By making LXC allow '/system', we have fully standardized on the use of either '/system' or '/session' for all the stateful drivers that run inside libvirtd. Support for lxc:/// is of course maintained for back-compat. Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
-
xen:///system由 Daniel P. Berrangé 提交于
Historically we have used a bare xen:/// URI for connecting to the legacy Xen driver. The new libxl Xen driver follows the new practice of allowing '/system' as a path, as well as bare '/' for compat with the old Xen driver. This documents xen:///system as the preferred format for Xen, leaving xen:/// as an undocumented feature just for back-compat. Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
-
由 Jim Fehlig 提交于
Signed-off-by: NJim Fehlig <jfehlig@suse.com> Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
-
- 10 4月, 2018 2 次提交
-
-
由 Jim Fehlig 提交于
Now that the old Xen driver is removed, update the drvxen page with current information on the libxl drvier and remove all the old cruft. Signed-off-by: NJim Fehlig <jfehlig@suse.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
-
由 Jim Fehlig 提交于
Signed-off-by: NJim Fehlig <jfehlig@suse.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
-
- 09 4月, 2018 2 次提交
-
-
由 Daniel P. Berrangé 提交于
Described how we decide which host platforms to support for libvirt, which in turn makes it easier to decide when a platform / software version can be dropped. Reviewed-by: NAndrea Bolognani <abologna@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com> Reviewed-by: NPavel Hrdina <phrdina@redhat.com> Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
-
由 Erik Skultety 提交于
Signed-off-by: NErik Skultety <eskultet@redhat.com>
-
- 07 4月, 2018 1 次提交
-
-
由 John Ferlan 提交于
Initially, update the UUID field to have the proper format, but then also changed the type, id, and name fields. Signed-off-by: NJohn Ferlan <jferlan@redhat.com> Reviewed-by: NErik Skultety <eskultet@redhat.com>
-
- 06 4月, 2018 4 次提交
-
-
由 Andrea Bolognani 提交于
Signed-off-by: NAndrea Bolognani <abologna@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Andrea Bolognani 提交于
Both pcie-to-pci-bridge and dmi-to-pci-bridge can be used to create a traditional PCI topology in a pure PCIe guest such as those using the x86_64/q35 or aarch64/virt machine type; however, the former should be preferred, as it doesn't need to obey limitation of real hardware and is completely architecture-agnostic. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1520821Signed-off-by: NAndrea Bolognani <abologna@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Andrea Bolognani 提交于
The new controller will not yet be used automatically by libvirt, but at this point it's already possible to configure a guest to use it. Signed-off-by: NAndrea Bolognani <abologna@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Andrea Bolognani 提交于
Instead of first listing the models on their own, and then listing them again grouped by the libvirt release they were introduced in, have a single list. Signed-off-by: NAndrea Bolognani <abologna@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
- 05 4月, 2018 1 次提交
-
-
由 Michal Privoznik 提交于
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-