This allows to remove some special case code from the generator.

Add special case code for updating a given domain object instead of
returning a new one.

The current virDomainMigrateFinish3 method signature attempts to
distinguish two types of errors, by allowing return with ret== 0,
but ddomain == NULL, to indicate a failure to start the guest.
This is flawed, because when ret == 0, there is no way for the
virErrorPtr details to be sent back to the client.

Change the signature of virDomainMigrateFinish3 so it simply
returns a virDomainPtr, in the same way as virDomainMigrateFinish2
The disk locking code will protect against the only possible
failure mode this doesn't account for (loosing conenctivity to
libvirtd after Finish3 starts the CPUs, but before the client
sees the reply for Finish3).

* src/driver.h, src/libvirt.c, src/libvirt_internal.h: Change
  virDomainMigrateFinish3 to return a virDomainPtr instead of int
* src/remote/remote_driver.c, src/remote/remote_protocol.x,
  daemon/remote.c, src/qemu/qemu_driver.c, src/qemu/qemu_migration.c:
  Update for API change

The virDomainMigratePerform3 currently has a single URI parameter
whose meaning varies. It is either

 - A QEMU migration URI (normal migration)
 - A libvirtd connection URI (peer2peer migration)

Unfortunately when using peer2peer migration, without also
using tunnelled migration, it is possible that both URIs are
required.

This adds a second URI parameter to the virDomainMigratePerform3
method, to cope with this scenario. Each parameter how has a fixed
meaning.

NB, there is no way to actually take advantage of this yet,
since virDomainMigrate/virDomainMigrateToURI do not have any
way to provide the 2 separate URIs

* daemon/remote.c, src/remote/remote_driver.c,
  src/remote/remote_protocol.x, src/remote_protocol-structs: Add
  the second URI parameter to perform3 message
* src/driver.h, src/libvirt.c, src/libvirt_internal.h: Add
  the second URI parameter to Perform3 method
* src/libvirt_internal.h, src/qemu/qemu_migration.c,
  src/qemu/qemu_migration.h: Update to handle URIs correctly

This extends the v3 migration protocol such that the
virDomainMigrateBegin3 and virDomainMigratePerform3
methods accept an application supplied XML config for
the target VM.

If the 'xmlin' parameter is NULL, then Begin3 uses the
current guest XML as normal. A driver implementing the
Begin3 method should either reject all non-NULL 'xmlin'
parameters, or strictly validate that the app supplied
XML does not change guest ABI.

The Perform3 method also needed the xmlin parameter to
cope with the Peer2Peer migration sequence.

NB it is not yet possible to use this capability since
neither of the public virDomainMigrate/virDomainMigrateToURI
methods have a way to pass in XML.

* daemon/remote.c, src/remote/remote_driver.c,
  src/remote/remote_protocol.x, src/remote_protocol-structs:
  Add 'remote_string xmlin' parameter to begin3/perform3
  RPC messages
* src/libvirt.c, src/driver.h, src/libvirt_internal.h: Add
  'const char *xmlin' parameter to Begin3/Perform3 methods
* src/qemu/qemu_driver.c, src/qemu/qemu_migration.c,
  src/qemu/qemu_migration.h: Pass xmlin parameter around
  migration methods

When using TLS authentication and operating as the non-root user,
initially attempt to use that specific user's TLS certificates before
attempting to use the system wide TLS certificates.
Signed-off-by: NDoug Goldstein <cardoe@cardoe.com>

The on-the-wire protocol is identical; XDR guarantees that
both 'hyper' and 'unsigned hyper' are transmitted as 8 bytes.

* src/remote/remote_protocol.x (remote_get_version_ret)
(remote_get_lib_version_ret): Match public API.
* daemon/remote_generator.pl: Drop special case.
* src/remote_protocol-structs: Reflect updated type.

support for virDomainSetSchedulerParametersFlags of remote driver.

For virDomainDestroy and virDrvSupportsFeature.

* src/remote/rpcgen_fix.pl: Add executable bit.
* tests/oomtrace.pl: Likewise.

When failing to marshall an XDR message, include the
full program/version/status/proc/type info, to allow
easier debugging & diagnosis of the problem.

* src/remote/remote_driver.c: Improve error when marshalling
  fails

The migration protocol has support for a 'cookie' parameter which
is an opaque array of bytes as far as libvirt is concerned. Drivers
may use this for passing around arbitrary extra data they might
need during migration. The QEMU driver needs to do a few things:

 - Pass hostname/uuid to allow strict protection against localhost
   migration attempts
 - Pass SPICE/VNC server port from the target back to the source to
   allow seamless relocation of client sessions
 - Pass lock driver state from source to destination

This patch introduces the basic glue for handling cookies
but only includes the host/guest UUID & name.

* src/libvirt_private.syms: Export virXMLParseStrHelper
* src/qemu/qemu_migration.c, src/qemu/qemu_migration.h: Parsing
  and formatting of migration cookies
* src/qemu/qemu_driver.c: Pass in cookie parameters where possible
* src/remote/remote_protocol.h, src/remote/remote_protocol.x: Change
  cookie max length to 16384 bytes

* src/remote/remote_protocol.x: Define wire protocol for migration
  protocol v3
* daemon/remote.c: Server side dispatch
* src/remote/remote_driver.c: Client side serialization
* src/remote/remote_protocol.c, src/remote/remote_protocol.h,
  daemon/remote_dispatch_args.h, daemon/remote_dispatch_prototypes.h,
  daemon/remote_dispatch_ret.h, daemon/remote_dispatch_table.h:
  Re-generate files
* src/remote_protocol-structs: Declare new ABIs

Add many version number annotations to the internal driver
tables, to allow hvsupport.html to display more accurate
information

Change all the driver struct initializers to use the
C99 style, leaving out unused fields. This will make
it possible to add new APIs without changing every
driver. eg change:

    qemudDomainResume, /* domainResume */
    qemudDomainShutdown, /* domainShutdown */
    NULL, /* domainReboot */
    qemudDomainDestroy, /* domainDestroy */

to

    .domainResume = qemudDomainResume,
    .domainShutdown = qemudDomainShutdown,
    .domainDestroy = qemudDomainDestroy,

And get rid of any existing C99 style initializersr which
set NULL, eg change

     .listPools          = vboxStorageListPools,
     .numOfDefinedPools  = NULL,
     .listDefinedPools   = NULL,
     .findPoolSources    = NULL,
     .poolLookupByName   = vboxStoragePoolLookupByName,

to

     .listPools          = vboxStorageListPools,
     .poolLookupByName   = vboxStoragePoolLookupByName,

Fix some driver names:

  s/virDrvCPUCompare/virDrvCompareCPU/
  s/virDrvCPUBaseline/virDrvBaselineCPU/
  s/virDrvQemuDomainMonitorCommand/virDrvDomainQemuMonitorCommand/
  s/virDrvSecretNumOfSecrets/virDrvNumOfSecrets/
  s/virDrvSecretListSecrets/virDrvListSecrets/

And some driver struct field names:

  s/getFreeMemory/nodeGetFreeMemory/

And drop the now unused virExecDaemonize

One functionality change here is that we no longer force enable the event
timeout for every queued event, only enable it for the first event after
the queue has been flushed. This is how other drivers have already done it,
and I haven't encountered problems in practice.

v3:
    Adjust for new virDomainEventStateNew argument

* src/remote/remote_protocol.x: Wire protocol definition
* daemon/remote.c: Daemon part
* src/remote/remote_driver.c: Client part
* src/remote_protocol-structs: Add structures

* src/driver.h: Stub code for new API
* src/esx/esx_driver.c, src/libxl/libxl_driver.c,
  src/lxc/lxc_driver.c, src/openvz/openvz_driver.c,
  src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
  rc/remote/remote_driver.c, rc/test/test_driver.c,
  src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
  src/vmware/vmware_driver.c, src/xen/xen_driver.c,
  src/xen/xen_driver.h, src/xen/xen_hypervisor.c,
  src/xen/xen_inotify.c, src/xen/xend_internal.c,
  src/xen/xm_internal.c, src/xen/xs_internal.c,
  src/xenapi/xenapi_driver.c: Add dummy entries in driver
  table for new APIs

Make procedure parsing more robust, by allowing arbitrary
amounts of whitespaces.

Also make some error messages more verbose.

These VIR_XXXX0 APIs make us confused, use the non-0-suffix APIs instead.

How do these coversions works? The magic is using the gcc extension of ##.
When __VA_ARGS__ is empty, "##" will swallow the "," in "fmt," to
avoid compile error.

example: origin				after CPP
	high_level_api("%d", a_int)	low_level_api("%d", a_int)
	high_level_api("a  string")	low_level_api("a  string")

About 400 conversions.

8 special conversions:
VIR_XXXX0("") -> VIR_XXXX("msg") (avoid empty format) 2 conversions
VIR_XXXX0(string_literal_with_%) -> VIR_XXXX(%->%%) 0 conversions
VIR_XXXX0(non_string_literal) -> VIR_XXXX("%s", non_string_literal)
  (for security) 6 conversions
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>

Allow the CA certificate to come from the user's home directory or from
the global location independently of the client certificate/key pair.

Mostly for the case when each user on a system has their own cert/key
pair but the system as a whole shares the same CA.
Signed-off-by: NDoug Goldstein <cardoe@gentoo.org>

Rename u_int and unsigned to unsigned int. This gets rid of some special
case code in the generator.

This matches the public API and helps to get rid of some special
case code in the remote generator.

Rename driver API functions and XDR protocol structs.

No functional change included outside of the remote generator.

Stop storing the generated files for the remote protocol client
and server in source control. The generated files will still be
included in the result of 'make dist' to avoid end-users needing
to generate the files
Signed-off-by: NEric Blake <eblake@redhat.com>

Unfortunately, this means that the strings marked for translation
in generated files are not picked up by gnulib's syntax-check,
I'm working on fixing that in gnulib.

* .gitignore, cfg.mk, po/POTFILES.in: Reflect deletion.

Always generate the rpc files, and require rpcgen during bootstrap.

* daemon/Makefile.am: Removed generated files with
  maintainer-clean target
* src/Makefile.am: Removed generated files with
  maintainer-clean target. Always run 'rpcgen' if
  generated files are missing

In preparation for removing generated files, it is necessary
to tell automake that the generated files must be distributed
but not directly compiled (since they are included into the
body of a larger .c file that is compiled).  Hence, even though
these files are code and not headers in the strict sense of
the word, it is easier to rename them to .h for automake's sake.

* daemon/remote_client_bodies.c: Rename to .h.
* daemon/qemu_client_bodies.c: Likewise.
* src/remote/remote_client_bodies.c: Likewise.
* src/remote/qemu_client_bodies.c: Likewise.
* daemon/Makefile.am (remote_dispatch_bodies.c)
(qemu_dispatch_bodies.c): Rename to .h.
(remote.c, EXTRA_DIST): Reflect rename.
* daemon/remote.c: Likewise.
* daemon/remote_generator.pl: Likewise.
* src/Makefile.am (remote/remote_driver.c): Likewise.
* src/remote/remote_driver.c: Likewise.
* po/POTFILES.in: Likewise.
* cfg.mk (exclude_file_name_regexp--sc_require_config_h)
(exclude_file_name_regexp--sc_require_config_h_first)
(exclude_file_name_regexp--sc_prohibit_empty_lines_at_EOF):
Likewise.

This adds length checks to all affected functions.

Add generic versions of the open and close functions and call them.