Since the code checks and handles a NULL 'path', no need for the NONNULL

Since the code checks and handles a NULL 'net_bandwidth' parameter,
so no need for NONNNULL.

The API checks each parameter for NULL anyway and would error, so need
to add NONNULL on prototype.

The code checks and handles a NULL 'migrate', so no need for NONNULL

Since the function handles a NULL 'mgr' condition, no need for the NONNULL

Since the code checks 'mgr == NULL' anyway, no need for the prototype
to have the NONNULL arg check.  Also add an error message to indicate what
the failure is so that there isn't a failed for some reason error.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The comparison code used STREQ_NULLABLE anyway for both 'drv_name' and
'dom_name', so no need. Add a NULLSTR on the 'dom_name' too.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The comparison code used STREQ_NULLABLE anyway for both 'drv_name' and
'dom_name', so no need. Add a NULLSTR on the 'dom_name' too.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The called function uses a STRNEQ_NULLABLE anyway for both 'drv_name' and
'dom_name', so no need.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The code checks and handles a NULL 'str', so just remove the NONNULL.

Update the error message to add the NULLSTR() around 'str' also.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rather than returning an int and a *bitmap pointer, just return and
check a NULL bitmap pointer

The 'mon' argument validity is checked in the QEMU_CHECK_MONITOR for the
following functions, so they don't need the NONNULL on their prototype:

qemuMonitorUpdateVideoMemorySize
qemuMonitorUpdateVideoVram64Size
qemuMonitorGetAllBlockStatsInfo
qemuMonitorBlockStatsUpdateCapacity
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The prototype requires not passing a NULL in the parameter and the callers
all would fail far before this code would fail if 'vm' was NULL, so just
remove the check.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The prototype requires a NONNULL argument and the only caller passes in
a non-null parameter. Besides the "else if" condition would deref it anyway.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Since the code checks and handles a NULL 'numa' parameter, remove the NONNULL
from the prototype.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Since the code checks and handles NULL parameters, remove the NONNULL
from the prototype.

Also fix the comment in the source to reference the right name.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Since the code checks and handles a NULL 'node' before proceeding
there's no need for the prototype with the NONNULL(2).
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The 'ifindex' argument is not a pointer, so no need for NONNULL in prototype

The qemuDomainSnapshotPrepare should always set a > 0 format value anyway,
so remove the check.

Found by Coverity.

If a network is destroyed and restarted, or its bridge is changed, any
tap devices that had previously been connected to the bridge will no
longer be connected. As a first step in automating a reconnection of
all tap devices when this happens, this patch modifies
networkNotifyActualDevice() (which is called once for every
<interface> of every active domain whenever libvirtd is restarted) to
reconnect any tap devices that it finds disconnected.

With this patch in place, you will need to restart libvirtd to
reconnect all the taps to their proper bridges. A future patch will
add a callback that hypervisor drivers can register with the network
driver to that the network driver can trigger this behavior
automatically whenever a network is started.

This patch splits out the part of virNetDevTapCreateInBridgePort()
that would need to be re-done if an existing tap device had to be
re-attached to a bridge, and puts it into a separate function. This
can be used both when an existing domain interface config is updated
to change its connection, and also to re-attach to the "same" bridge
when a network has been stopped and restarted. So far it is used for
nothing.

This function provides the bridge/bond device that the given network
device is attached to. The return value is 0 or -1, and the master
device is a char** argument to the function - this is needed in order
to allow for a "success" return from a device that has no master.

The only reason that the ethtool features weren't being retrieved in
an unprivileged libvirtd was because they required ioctl(), and the
ioctl was using an AF_PACKET socket, which requires root. Now that we
are using AF_UNIX for ioctl(), this restriction can be removed.

The exact family of the socket created for the fd used by ioctl(7)
doesn't matter, it just needs to be a socket and not a file. But for
some reason when macvtap support was added, it used
AF_PACKET/SOCK_DGRAM sockets for its ioctls; we later used the same
AF_PACKET/SOCK_DGRAM socket for new ioctls we added, and eventually
modified the other pre-existing ioctl sockets (for creating/deleting
bridges) to also use AF_PACKET/SOCK_DGRAM (that code originally used
AF_UNIX/SOCK_STREAM).

The problem with using AF_PACKET (intended for sending/receiving "raw"
packets, i.e. packets that can be some protocol other than TCP or UDP)
is that it requires root privileges. This meant that none of the
ioctls in virnetdev.c or virnetdevip.c would work when running
libvirtd unprivileged.

This packet solves that problem by changing the family to AF_UNIX when
creating the socket used for any ioctl().

For some drivers the domain's machine type makes no sense. They
just don't use it. A great example is bhyve driver. Therefore it
makes very less sense to report machine in domain capabilities
XML.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

When enabling IPv6 on all interfaces, we may get the host Router
Advertisement routes discarded. To avoid this, the user needs to set
accept_ra to 2 for the interfaces with such routes.

See https://www.kernel.org/doc/Documentation/networking/ip-sysctl.txt
on this topic.

To avoid user mistakenly losing routes on their hosts, check
accept_ra values before enabling IPv6 forwarding. If a RA route is
detected, but neither the corresponding device nor global accept_ra
is set to 2, the network will fail to start.

Add a function getting the name of a network interface out of its index.

Replace a few occurences of /proc/sys by the corresponding macro
defined a few lines after: SYSCTL_PATH

virNetlinkCommand() processes only one response message, while some
netlink commands, like route dumping, need to process several.
Add virNetlinkDumpCommand() as a virNetlinkCommand() sister.

Allow to reuse as much as possible from virNetlinkCommand(). This
comment prepares for the introduction of virNetlinkDumpCommand()
only differing by how it handles the responses.

Commit id '85af0b80' added a 'timeout' as the 4th parameter to
qemuMonitorOpen, but neglected to update the ATTRIBUTE_NONNULL(4)
to be (5) for the cb parameter.

It was pointed out here:

  https://bugzilla.redhat.com/show_bug.cgi?id=1331796#c4

that we shouldn't be adding a "no-resolv" to the dnsmasq.conf file for
a network if there isn't any <forwarder> element that specifies an IP
address but no qualifying domain. If there is such an element, it will
handle all DNS requests that weren't otherwise handled by one of the
forwarder entries with a matching domain attribute. If not, then DNS
requests that don't match the domain of any <forwarder> would not be
resolved if we added no-resolv.

So, only add "no-resolv" when there is at least one <forwarder>
element that specifies an IP address but no qualifying domain.

We reported error in caller virQEMUCapsCacheLookupByArch.
So the same error messages in qemuConnectGetDomainCapabilities
is useless.
Signed-off-by: NChen Hanxiao <chenhanxiao@gmail.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Calling virCPUUpdateLive on a domain with no guest CPU configuration
does not make sense. Especially when doing so would crash libvirtd.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Use "virStoragePoolObj" as a prefix for any external API in virstorageobj.

Also a couple of functions were local to virstorageobj.c, so remove their
external defs iin virstorageobj.h.

NB: The virStorageVolDef* API's won't change.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

In an effort to be consistent with the source module, alter the function
prototypes to follow the similar style of source with the "type" on one
line followed by the function name and arguments on subsequent lines with
with argument getting it's own line.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Alter the format of the code to follow more recent style guidelines of
two empty lines between functions, function decls with "[static] type"
on one line followed by function name with arguments to functions each
on one line.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>