This makes use of the QEMU guest agent to implement the
virDomainShutdownFlags and virDomainReboot APIs. With
no flags specified, it will prefer to use the agent, but
fallback to ACPI. Explicit choice can be made by using
a suitable flag

* src/qemu/qemu_driver.c: Wire up use of agent

Add a new API virDomainShutdownFlags and define:

    VIR_DOMAIN_SHUTDOWN_DEFAULT        = 0,
    VIR_DOMAIN_SHUTDOWN_ACPI_POWER_BTN = (1 << 0),
    VIR_DOMAIN_SHUTDOWN_GUEST_AGENT    = (1 << 1),

Also define some flags for the reboot API

    VIR_DOMAIN_REBOOT_DEFAULT        = 0,
    VIR_DOMAIN_REBOOT_ACPI_POWER_BTN = (1 << 0),
    VIR_DOMAIN_REBOOT_GUEST_AGENT    = (1 << 1),

Although these two APIs currently have the same flags, using
separate enums allows them to expand separately in the future.

Add stub impls of the new API for all existing drivers

There is now a standard QEMU guest agent that can be installed
and given a virtio serial channel

    <channel type='unix'>
      <source mode='bind' path='/var/lib/libvirt/qemu/f16x86_64.agent'/>
      <target type='virtio' name='org.qemu.guest_agent.0'/>
    </channel>

The protocol that runs over the guest agent is JSON based and
very similar to the JSON monitor. We can't use exactly the same
code because there are some odd differences in the way messages
and errors are structured. The qemu_agent.c file is based on
a combination and simplification of qemu_monitor.c and
qemu_monitor_json.c

* src/qemu/qemu_agent.c, src/qemu/qemu_agent.h: Support for
  talking to the agent for shutdown
* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Add thread
  helpers for talking to the agent
* src/qemu/qemu_process.c: Connect to agent whenever starting
  a guest
* src/qemu/qemu_monitor_json.c: Make variable static

One of latest patches (b7bcb22c) enhanced testing for virHashEqual.
However, hash2 variable might be used uninitialized.

Add a test case to test the virHashEqual function.

Add function to compare two hash tables for equality.

Since we already require the kernel to be new enough to support
LO_FLAGS_AUTOCLEAR, we might as well also require glibc to be
new enough to support epoll_create1().

* configure.ac (with_lxc): We require glibc 2.9 for LXC.
Reported and tested by Philipp Hahn.

by dereferencing a NULL pointer in the call to
virNodeSuspendGetTargetMask.

Other virsh domifXXX commands can accept target name
as a parameter to specify interface. From viewpoint of
consistency, virsh domif-getlink command should accept
target name as a parameter. This patch achieves this.
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>

Fix inconsistent whitespace and long lines.

* src/qemu/qemu_capabilities.h (qemuCapsFlags): Improve formatting.

When converting a linear enum to a string, we have checks in
place in the VIR_ENUM_IMPL macro to ensure that there is one
string for every value, which lets us quickly flag if a user
added a value but forgot to add a counterpart string.  However,
this only works if we use the _LAST marker.

* cfg.mk (sc_require_enum_last_marker): New syntax check.
* src/conf/domain_conf.h (virDomainSnapshotState): Add new marker.
* src/conf/domain_conf.c (virDomainSnapshotState): Fix offender.
* src/qemu/qemu_monitor_json.c (qemuMonitorWatchdogAction)
(qemuMonitorIOErrorAction, qemuMonitorGraphicsAddressFamily):
Likewise.
* src/util/virtypedparam.c (virTypedParameter): Likewise.

Although this is a public API break, it only affects users that
were compiling against *_LAST values, and can be trivially
worked around without impacting compilation against older
headers, by the user defining VIR_ENUM_SENTINELS before using
libvirt.h.  It is not an ABI break, since enum values do not
appear as .so entry points.  Meanwhile, it prevents users from
using non-stable enum values without explicitly acknowledging
the risk of doing so.

See this list discussion:
https://www.redhat.com/archives/libvir-list/2012-January/msg00804.html

* include/libvirt/libvirt.h.in: Hide all sentinels behind
LIBVIRT_ENUM_SENTINELS, and add missing sentinels.
* src/internal.h (VIR_DEPRECATED): Allow inclusion after
libvirt.h.
(LIBVIRT_ENUM_SENTINELS): Expose sentinels internally.
* daemon/libvirtd.h: Use the sentinels.
* src/remote/remote_protocol.x (includes): Don't expose sentinels.
* python/generator.py (enum): Likewise.
* tests/cputest.c (cpuTestCompResStr): Silence compiler warning.
* tools/virsh.c (vshDomainStateReasonToString)
(vshDomainControlStateToString): Likewise.

While we still don't want to enable gcc's new -Wformat-literal
warning, I found a rather easy case where the warning could be
reduced, by getting rid of obsolete error-reporting practices.
This is the last place where we were passing the (unused) net
and conn arguments for constructing an error.

* src/util/virterror_internal.h (virErrorMsg): Delete prototype.
(virReportError): Delete macro.
* src/util/virterror.c (virErrorMsg): Make static.
* src/libvirt_private.syms (virterror_internal.h): Drop export.
* src/util/conf.c (virConfError): Convert to macro.
(virConfErrorHelper): New function, and adjust error calls.
* src/xen/xen_hypervisor.c (virXenErrorFunc): Delete.
(xenHypervisorGetSchedulerType)
(xenHypervisorGetSchedulerParameters)
(xenHypervisorSetSchedulerParameters)
(xenHypervisorDomainBlockStats)
(xenHypervisorDomainInterfaceStats)
(xenHypervisorDomainGetOSType)
(xenHypervisorNodeGetCellsFreeMemory, xenHypervisorGetVcpus):
Update callers.

Reusing common code makes things smaller; it also buys us some
additional safety, such as now rejecting duplicate parameters
during a set operation.

* src/qemu/qemu_driver.c (qemuDomainSetBlkioParameters)
(qemuDomainSetMemoryParameters, qemuDomainSetNumaParameters)
(qemuSetSchedulerParametersFlags)
(qemuDomainSetInterfaceParameters, qemuDomainSetBlockIoTune)
(qemuDomainGetBlkioParameters, qemuDomainGetMemoryParameters)
(qemuDomainGetNumaParameters, qemuGetSchedulerParametersFlags)
(qemuDomainBlockStatsFlags, qemuDomainGetInterfaceParameters)
(qemuDomainGetBlockIoTune): Use new helpers.
* src/esx/esx_driver.c (esxDomainSetSchedulerParametersFlags)
(esxDomainSetMemoryParameters)
(esxDomainGetSchedulerParametersFlags)
(esxDomainGetMemoryParameters): Likewise.
* src/libxl/libxl_driver.c
(libxlDomainSetSchedulerParametersFlags)
(libxlDomainGetSchedulerParametersFlags): Likewise.
* src/lxc/lxc_driver.c (lxcDomainSetMemoryParameters)
(lxcSetSchedulerParametersFlags, lxcDomainSetBlkioParameters)
(lxcDomainGetMemoryParameters, lxcGetSchedulerParametersFlags)
(lxcDomainGetBlkioParameters): Likewise.
* src/test/test_driver.c (testDomainSetSchedulerParamsFlags)
(testDomainGetSchedulerParamsFlags): Likewise.
* src/xen/xen_hypervisor.c (xenHypervisorSetSchedulerParameters)
(xenHypervisorGetSchedulerParameters): Likewise.

Preparation for another patch that refactors common patterns
into the new file for fewer lines of code overall.

* src/util/util.h (virTypedParameterArrayClear): Move...
* src/util/virtypedparam.h: ...to new file.
(virTypedParameterArrayValidate, virTypedParameterAssign): New
prototypes.
* src/util/util.c (virTypedParameterArrayClear): Likewise.
* src/util/virtypedparam.c: New file.
* po/POTFILES.in: Mark file for translation.
* src/Makefile.am (UTIL_SOURCES): Build it.
* src/libvirt_private.syms (util.h): Split...
(virtypedparam.h): to new section.
(virkeycode.h): Sort.
* daemon/remote.c: Adjust callers.
* tools/virsh.c: Likewise.

Based on qemu changes made in commits ae523427 and 659ded58.

* src/lxc/lxc_driver.c (lxcSetSchedulerParametersFlags)
(lxcGetSchedulerParametersFlags, lxcDomainSetBlkioParameters)
(lxcDomainGetBlkioParameters): Use helpers.
(lxcDomainSetBlkioParameters): Allow setting live and config at
once.

Gnulib claims that there are some classes of warnings that are
worth enabling during development, but where silencing those
warnings causes code bloat that is not necessary in an optimized
build.  The code bloat to silence the warnings is only enabled
by -Dlint.  Follow the lead of coreutils in setting up -Dlint
whenever full warnings are requested.

* m4/virt-compile-warnings.m4 (LIBVIRT_COMPILE_WARNINGS): Add
-Dlint, and move _FORTIFY_SOURCE to config.h instead of CFLAGS.

We had a memory leak on a very arcane OOM situation (unlikely to ever
hit in practice, but who knows if libvirt.so would ever be linked
into some other program that exhausts all thread-local storage keys?).
I found it by code inspection, while analyzing a valgrind report
generated by Alex Jia.

* src/util/threads.h (virThreadLocalSet): Alter signature.
* src/util/threads-pthread.c (virThreadHelper): Reduce allocation
lifetime.
(virThreadLocalSet): Detect failure.
* src/util/threads-win32.c (virThreadLocalSet): Likewise.
(virCondWait): Fix caller.
* src/util/virterror.c (virLastErrorObject): Likewise.

The RPC generator transforms methods matching certain
patterns like 'id' or 'uuid', etc but does not anchor
its matches to the end of the word. So if a method
contains 'id' in the middle (eg virIdentity) then the
RPC generator munges that.

* src/rpc/gendispatch.pl: Anchor matches

To avoid a namespace clash with forthcoming identity APIs,
rename the virNet*GetLocalIdentity() APIs to have the form
virNet*GetUNIXIdentity()

* daemon/remote.c, src/libvirt_private.syms: Update
  for renamed APIs
* src/rpc/virnetserverclient.c, src/rpc/virnetserverclient.h,
  src/rpc/virnetsocket.c, src/rpc/virnetsocket.h: s/LocalIdentity/UNIXIdentity/

* daemon/remote.c: remoteSASLFinish called the method
  virNetSASLSessionGetIdentity twice, remove second call

* daemon/remote.c, src/rpc/virnetserverclient.c,
  src/rpc/virnetserverclient.h, src/rpc/virnetsocket.c,
  src/rpc/virnetsocket.h: Add gid parameter

There was missing capability for blkiotune and thus specifying these
settings caused libvirt to run qemu with invalid parameters and then
reporting qemu error instead of the standard libvirt one. The support
for blkiotune setting was added in upstream qemu repo under commit
0563e191516289c9d2f282a8c50f2eecef2fa773.

Given an LXC guest with a root filesystem path of

  /export/lxc/roots/helloworld/root

During startup, we will pivot the root filesystem to end up
at

  /.oldroot/export/lxc/roots/helloworld/root

We then try to open

  /.oldroot/export/lxc/roots/helloworld/root/dev/pts

Now consider if '/export/lxc' is an absolute symlink pointing
to '/media/lxc'. The kernel will try to open

  /media/lxc/roots/helloworld/root/dev/pts

whereas it should be trying to open

  /.oldroot//media/lxc/roots/helloworld/root/dev/pts

To deal with the fact that the root filesystem can be moved,
we need to resolve symlinks in *any* part of the filesystem
source path.

* src/libvirt_private.syms, src/util/util.c,
  src/util/util.h: Add virFileResolveAllLinks to resolve
  all symlinks in a path
* src/lxc/lxc_container.c: Resolve all symlinks in filesystem
  paths during startup

It doesn't make sense to reattach a device to host while it's
still in use, e.g, by a domain.

pciTrySecondaryBusReset checks if there is active device on the
same bus, however, qemu driver doesn't maintain an effective
list for the inactive devices, and it passes meaningless argument
for parameter "inactiveDevs". e.g. (qemuPrepareHostdevPCIDevices)

if (!(pcidevs = qemuGetPciHostDeviceList(hostdevs, nhostdevs)))
    return -1;

..skipped...

if (pciResetDevice(dev, driver->activePciHostdevs, pcidevs) < 0)
    goto reattachdevs;

NB, the "pcidevs" used above are extracted from domain def, and
thus one won't be able to attach a device of which bus has other
device even detached from host (nodedev-detach). To see more
details of the problem:

RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=773667

This patch is to resolve the problem by introducing an inactive
PCI device list (just like qemu_driver->activePciHostdevs), and
the whole logic is:

  * Add the device to inactive list during nodedev-dettach
  * Remove the device from inactive list during nodedev-reattach
  * Remove the device from inactive list during attach-device
    (for non-managed device)
  * Add the device to inactive list after detach-device, only
    if the device is not managed

With the above, we have a sufficient inactive PCI device list, and thus
we can use it for pciResetDevice. e.g.(qemuPrepareHostdevPCIDevices)

if (pciResetDevice(dev, driver->activePciHostdevs,
                   driver->inactivePciHostdevs) < 0)
    goto reattachdevs;

Execute bit on *.stp files in examples/systemtap/ caused dependency when
building RPM packages. Disabling execute permission should help the auto
dependency resolver to see that systemtap is not needed.

This introduces new attribute wrpolicy with only supported
value as immediate. This will be an optional
attribute with no defaults. This helps specify whether
to skip the host page cache.

When wrpolicy is specified, meaning when wrpolicy=immediate
a writeback is explicitly initiated for the dirty pages in
the host page cache as part of the guest file write operation.

Usage:
<filesystem type='mount' accessmode='passthrough'>
  <driver type='path' wrpolicy='immediate'/>
  <source dir='/export/to/guest'/>
  <target dir='mount_tag'/>
</filesystem>

Currently this only works with type='mount' for the QEMU/KVM driver.
Signed-off-by: NDeepak C Shetty <deepakcs@linux.vnet.ibm.com>

In the past we didn't reserve 0:0:2.0 PCI address if there was no video
device assigned to a domain, which made it impossible to add a video
device later on. So we fixed it (commit v0.9.0-37-g7b2cac12) by always
reserving that address. However, that breaks existing domains without
video devices that already have another device assigned to the
problematic address.

This patch reserves address 0:0:2.0 only in case it was not explicitly
assigned to another device, which means libvirt will try to keep this
address free and will not automatically assign it new devices. But
existing domains for which older libvirt already assigned the address to
a non-video device will keep working as they used to work before 0.9.1.
Moreover, users who want to create a domain without a video device and
use its address for another device may do so by explicitly configuring
the PCI address in domain XML.

qemuxml2argvtest sanitizes PATH to just /bin, but on at least
Fedora 16, dirname lives in /usr/bin instead.  Regression
introduced in commit e7201afd.

* tests/qemuxml2argvdata/qemu.sh: Avoid forking a dirname call,
since dirname might not be in PATH after test sanitization.
* tests/qemuxml2argvdata/qemu-supported-cpus.sh: Likewise.
Diagnosed by Michal Privoznik.

The output of dumpxml for <iotune> settings was misformatted, this
patch just adds missing newlines.

Fix a typing error in the no-ip-spoofing filter.
Return DHCP request packets passing through this filter. Have
the user use another filter to actually allow DHCP requests to be
sent (action='accept').

The new dependancy is only available on ix86, x86_64 and ia64

This adds support for host-model and host-passthrough CPU modes to qemu
driver. The host-passthrough mode is mapped to -cpu host.

There are several reasons for doing this:

- the CPU specification is out of libvirt's control so we cannot
  guarantee stable guest ABI
- not every feature of a CPU may actually work as expected when
  advertised directly to a guest
- migration between two machines with exactly the same CPU may work but
  no guarantees can be made
- this mode is not supported and its use is at one's own risk

VIR_DOMAIN_XML_UPDATE_CPU flag for virDomainGetXMLDesc may be used to
get updated custom mode guest CPU definition in case it depends on host
CPU. This patch implements the same behavior for host-model and
host-passthrough CPU modes.

The mode can be either of "custom" (default), "host-model",
"host-passthrough". The semantics of each mode is described in the
following examples:

- guest CPU is a default model with specified topology:
    <cpu>
      <topology sockets='1' cores='2' threads='1'/>
    </cpu>

- guest CPU matches selected model:
    <cpu mode='custom' match='exact'>
      <model>core2duo</model>
    </cpu>

- guest CPU should be a copy of host CPU as advertised by capabilities
  XML (this is a short cut for manually copying host CPU specification
  from capabilities to domain XML):
    <cpu mode='host-model'/>

  In case a hypervisor does not support the exact host model, libvirt
  automatically falls back to a closest supported CPU model and
  removes/adds features to match host. This behavior can be disabled by
    <cpu mode='host-model'>
      <model fallback='forbid'/>
    </cpu>

- the same as previous returned by virDomainGetXMLDesc with
  VIR_DOMAIN_XML_UPDATE_CPU flag:
    <cpu mode='host-model' match='exact'>
      <model fallback='allow'>Penryn</model>       --+
      <vendor>Intel</vendor>                         |
      <topology sockets='2' cores='4' threads='1'/>  + copied from
      <feature policy='require' name='dca'/>         | capabilities XML
      <feature policy='require' name='xtpr'/>        |
      ...                                          --+
    </cpu>

- guest CPU should be exactly the same as host CPU even in the aspects
  libvirt doesn't model (such domain cannot be migrated unless both
  hosts contain exactly the same CPUs):
    <cpu mode='host-passthrough'/>

- the same as previous returned by virDomainGetXMLDesc with
  VIR_DOMAIN_XML_UPDATE_CPU flag:
    <cpu mode='host-passthrough' match='minimal'>
      <model>Penryn</model>                        --+ copied from caps
      <vendor>Intel</vendor>                         | XML but doesn't
      <topology sockets='2' cores='4' threads='1'/>  | describe all
      <feature policy='require' name='dca'/>         | aspects of the
      <feature policy='require' name='xtpr'/>        | actual guest CPU
      ...                                          --+
    </cpu>

In case a hypervisor doesn't support the exact CPU model requested by a
domain XML, we automatically fallback to a closest CPU model the
hypervisor supports (and make sure we add/remove any additional features
if needed). This patch adds 'fallback' attribute to model element, which
can be used to disable this automatic fallback.