s/unitl/until
Signed-off-by: NChen Hanxiao <chenhanxiao@gmail.com>

Now that we have two same implementations for getting path for
huge pages backed guest memory, lets merge them into one function.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

When trying to migrate a huge page enabled guest, I've noticed
the following crash. Apparently, if no specific hugepages are
requested:

  <memoryBacking>
    <hugepages/>
  </memoryBacking>

and there are no hugepages configured on the destination, we try
to dereference a NULL pointer.

Program received signal SIGSEGV, Segmentation fault.
0x00007fcc907fb20e in qemuGetHugepagePath (hugepage=0x0) at qemu/qemu_conf.c:1447
1447        if (virAsprintf(&ret, "%s/libvirt/qemu", hugepage->mnt_dir) < 0)
(gdb) bt
#0  0x00007fcc907fb20e in qemuGetHugepagePath (hugepage=0x0) at qemu/qemu_conf.c:1447
#1  0x00007fcc907fb2f5 in qemuGetDefaultHugepath (hugetlbfs=0x0, nhugetlbfs=0) at qemu/qemu_conf.c:1466
#2  0x00007fcc907b4afa in qemuBuildMemoryBackendStr (size=4194304, pagesize=0, guestNode=0, userNodeset=0x0, autoNodeset=0x0, def=0x7fcc70019070, qemuCaps=0x7fcc70004000, cfg=0x7fcc5c011800, backendType=0x7fcc95087228, backendProps=0x7fcc95087218,
    force=false) at qemu/qemu_command.c:3297
#3  0x00007fcc907b4f91 in qemuBuildMemoryCellBackendStr (def=0x7fcc70019070, qemuCaps=0x7fcc70004000, cfg=0x7fcc5c011800, cell=0, auto_nodeset=0x0, backendStr=0x7fcc70020360) at qemu/qemu_command.c:3413
#4  0x00007fcc907c0406 in qemuBuildNumaArgStr (cfg=0x7fcc5c011800, def=0x7fcc70019070, cmd=0x7fcc700040c0, qemuCaps=0x7fcc70004000, auto_nodeset=0x0) at qemu/qemu_command.c:7470
#5  0x00007fcc907c5fdf in qemuBuildCommandLine (driver=0x7fcc5c07b8a0, logManager=0x7fcc70003c00, def=0x7fcc70019070, monitor_chr=0x7fcc70004bb0, monitor_json=true, qemuCaps=0x7fcc70004000, migrateURI=0x7fcc700199c0 "defer", snapshot=0x0,
    vmop=VIR_NETDEV_VPORT_PROFILE_OP_MIGRATE_IN_START, standalone=false, enableFips=false, nodeset=0x0, nnicindexes=0x7fcc95087498, nicindexes=0x7fcc950874a0, domainLibDir=0x7fcc700047c0 "/var/lib/libvirt/qemu/domain-1-fedora") at qemu/qemu_command.c:9547
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Both qemu monitor and agent print the same
log on HUANGUP event, which would be confusing
when reading libvirtd log.

This patch will give a different log message to them.
Signed-off-by: NChen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Most of QEMU's PCI display device models, such as:

  libvirt video/model/@type  QEMU -device
  -------------------------  ------------
  cirrus                     cirrus-vga
  vga                        VGA
  qxl                        qxl-vga
  virtio                     virtio-vga

come with a linear framebuffer (sometimes called "VGA compatibility
framebuffer"). This linear framebuffer lives in one of the PCI device's
MMIO BARs, and allows guest code (primarily: firmware drivers, and
non-accelerated OS drivers) to display graphics with direct memory access.

Due to architectural reasons on aarch64/KVM hosts, this kind of
framebuffer doesn't / can't work in

  qemu-system-(arm|aarch64) -M virt

machines. Cache coherency issues guarantee a corrupted / unusable display.
The problem has been researched by several people, including kvm-arm
maintainers, and it's been decided that the best way (practically the only
way) to have boot time graphics for such guests is to consolidate on
QEMU's "virtio-gpu-pci" device.

>From <https://bugzilla.redhat.com/show_bug.cgi?id=1195176>, libvirt
supports

  <devices>
    <video>
      <model type='virtio'/>
    </video>
  </devices>

but libvirt unconditionally maps @type='virtio' to QEMU's "virtio-vga"
device model. (See the qemuBuildDeviceVideoStr() function and the
"qemuDeviceVideo" enum impl.)

According to the above, this is not right for the "virt" machine type; the
qemu-system-(arm|aarch64) binaries don't even recognize the "virtio-vga"
device model (justifiedly). Whereas "virtio-gpu-pci", which is a pure
virtio device without a compatibility framebuffer, is available, and works
fine.

(The ArmVirtQemu ("AAVMF") platform of edk2 -- that is, the UEFI firmware
for "virt" -- supports "virtio-gpu-pci", as of upstream commit
3ef3209d3028. See
<https://tianocore.acgmultimedia.com/show_bug.cgi?id=66>.)

Override the default mapping of "virtio", from "virtio-vga" to
"virtio-gpu-pci", if qemuDomainMachineIsVirt() evaluates to true.

Cc: Andrea Bolognani <abologna@redhat.com>
Cc: Drew Jones <drjones@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Martin Kletzander <mkletzan@redhat.com>
Suggested-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1372901Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Acked-by: NMartin Kletzander <mkletzan@redhat.com>

Use the state information (online, hotpluggable) provided by the monitor
code rather than trying to infer it. This fixes an issue where on
architectures that require hotplug of multiple threads at once the
sub-cores would get updated as offline on daemon restart thus creating
an invalid configuration.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1375783

Return whether a vcpu entry is hotpluggable or online so that upper
layers don't have to infer the information from other data.

Advantage is that this code can be tested by unit tests.

Add separate iterator for iterating all the entries

The algorithm that matches data from query-cpus and
query-hotpluggable-cpus is quite complex. Start using descriptive
iterator names to avoid confusion.

https://bugzilla.redhat.com/show_bug.cgi?id=1372613

Apparently, some management applications use the following code
pattern when waiting for a block job to finish:

  while (1) {
    virDomainGetBlockJobInfo(dom, disk, info, flags);

    if (info.cur == info.end)
        break;

    sleep(1);
  }

Problem with this approach is in its corner cases. In case of
QEMU, libvirt merely pass what has been reported on the monitor.
However, if the block job hasn't started yet, qemu reports cur ==
end == 0 which tricks mgmt apps into thinking job is complete.

The solution is to mangle cur/end values as described here [1].

1: https://www.redhat.com/archives/libvir-list/2016-September/msg00017.htmlSigned-off-by: NMichal Privoznik <mprivozn@redhat.com>

Even though we merely just pass to users whatever qemu provided
on the monitor, we still do some translation. For instance we
turn bytes into mebibytes, or fix job type if needed. However, in
the future there is more fixing to be done so this code deserves
its own function.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Name it virNumaGetHostMemoryNodeset and return only NUMA nodes which
have memory installed. This is necessary as the kernel is not very happy
to set the memory cgroup setting for nodes which do not have any memory.

This would break vcpu hotplug with following message on such
configruation:

  Invalid value '0,8' for 'cpuset.mems': Invalid argument

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1375268

Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

virQEMUDriverConfigNew() always initializes the bitmap in its
cgroupControllers member to -1 (i.e. all 1's).

Prior to commit a9331394, if qemu.conf had a line with
"cgroup_controllers", cgroupControllers would get reset to 0 before
going through a loop setting a bit for each named cgroup controller.
commit a9331394 left out the "reset to 0" part, so cgroupControllers
would always be -1; if you didn't want a controller included, there
was no longer a way to make that happen.

This was discovered by users who were using qemu commandline
passthrough to use the "input-linux" method of directing
keyboard/mouse input to a virtual machine:

 https://www.redhat.com/archives/vfio-users/2016-April/msg00105.html

Here's the first report I found of the problem encountered after
upgrading libvirt beyond v2.0.0:

 https://www.redhat.com/archives/vfio-users/2016-August/msg00053.html

Thanks to sL1pKn07 SpinFlo <sl1pkn07@gmail.com> for bringing the
problem up in IRC, and then taking the time to do a git bisect and
find the patch that started the problem.

previous commit:

  commit 2c322378
  Author: John Ferlan <jferlan@redhat.com>
  Date:   Mon Jun 13 12:30:34 2016 -0400

    qemu: Add the ability to hotplug the TLS X.509 environment

added a parameter "bool listen" in some methods. This
unfortunately clashes with the listen() method, causing
compile failures on certain platforms (RHEL-6 for example)
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

When migration fails, we need to poke QEMU monitor to check for a reason
of the failure. We did this using query-migrate QMP command, which is
not supposed to return any meaningful result on the destination side.
Thus if the monitor was still functional when we detected the migration
failure, parsing the answer from query-migrate always failed with the
following error message:

    "info migration reply was missing return status"

This irrelevant message was then used as the reason for the migration
failure replacing any message we might have had.

Let's use harmless query-status for poking the monitor to make sure we
only get an error if the monitor connection is broken.

https://bugzilla.redhat.com/show_bug.cgi?id=1374613Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Qemu always opens the tray if forced to. Skip the waiting step in such
case.

This also helps if qemu does not report the tray change event when
opening the cdrom forcibly (the documentation says that the event will
not be sent although qemu in fact does trigger it even if @force is
selceted).

This is a workaround for a qemu issue where qemu does not send the tray
change event in some cases (after migration with empty closed locked
drive) and thus renders the cdrom useless from libvirt's point of view.

Partially resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1368368

When a source image is dropped when missing due to startup policy the
policy needs to be cleared since it was relevant only for the given
storage source. New sources need to update it if needed.

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Just like in the previous commit, teach qemu driver to detect
whether qemu supports this configuration knob or not.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1366989

QEMU added another virtio-net tunable [1]. It basically allows
users to set the size of RX virtio ring. But because virtio-net
uses two separate ring buffers to pass data from/to guest they
named it explicitly rx_queue_size. We should expose it in our XML
too.

1: http://lists.nongnu.org/archive/html/qemu-devel/2016-08/msg02029.htmlSigned-off-by: NMichal Privoznik <mprivozn@redhat.com>

If the incoming XML defined a path to a TLS X.509 certificate environment,
add the necessary 'tls-creds-x509' object to the VIR_DOMAIN_CHR_TYPE_TCP
character device.

Likewise, if the environment exists the hot unplug needs adjustment as
well.  Note that all the return ret were changed to goto cleanup since
the cfg needs to be unref'd
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

When building a chardev device string for tcp, add the necessary pieces to
access provide the TLS X.509 path to qemu.  This includes generating the
'tls-creds-x509' object and then adding the 'tls-creds' parameter to the
VIR_DOMAIN_CHR_TYPE_TCP command line.

Finally add the tests for the qemu command line. This test will make use
of the "new(ish)" /etc/pki/qemu setting for a TLS certificate environment
by *not* "resetting" the chardevTLSx509certdir prior to running the test.
Also use the default "verify" option (which is "no").
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add a new TLS X.509 certificate type - "chardev". This will handle the
creation of a TLS certificate capability (and possibly repository) for
properly configured character device TCP backends.

Unlike the vnc and spice there is no "listen" or "passwd" associated. The
credentials eventually will be handled via a libvirt secret provided to
a specific backend.

Make use of the default verify option as well.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rather than specify perhaps multiple TLS X.509 certificate directories,
let's create a "default" directory which can then be used if the service
(e.g. for now vnc and spice) does not supply a default directory.

Since the default for vnc and spice may have existed before without being
supplied, the default check will first check if the service specific path
exists and if so, set the cfg entry to that; otherwise, the default will
be set to the (now) new defaultTLSx509certdir.

Additionally add a "default_tls_x509_verify" entry which can also be used
to force the peer verification option (for vnc it's a x509verify option).
Add/alter the macro for the option being found in the config file to accept
the default value.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

If a migration of a domain which is already defined on the destination
host failed early (before we tried to start QEMU), we would forget to
remove the incoming transient definition. Later on when someone starts
the domain on the destination host, we will use the stale incoming
definition and the persistent definition will just be ignored.

https://bugzilla.redhat.com/show_bug.cgi?id=1368774Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The code for replacing domain's transient definition with the persistent
one is repeated in several places and we'll need to add one more. Let's
make a nice helper for it.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

At this point it's guaranteed that 'persistentDef' is non-NULL so we
don't need to check it again.

Similarly to vcpu hotplug the emulator thread cgroup numa mapping needs
to be relaxed while hot-adding vcpus so that the threads can allocate
data in the DMA zone.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1370084

When hot-adding vcpus qemu needs to allocate some structures in the DMA
zone which may be outside of the numa pinning. Extract the code doing
this in a set of helpers so that it can be reused.

A separate error code will help recognize real failures from
necessity to try again
Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>

Debug priority is good enough for this.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

We already have the ability to turn off dumping of guest
RAM via the domain XML. This is not particularly useful
though, as it is under control of the management application.
What is needed is a way for the sysadmin to turn off guest
RAM defaults globally, regardless of whether the mgmt app
provides its own way to set this in the domain XML.

So this adds a 'dump_guest_core' option in /etc/libvirt/qemu.conf
which defaults to false. ie guest RAM will never be included in
the QEMU core dumps by default. This default is different from
historical practice, but is considered to be more suitable as
a default because

 a) guest RAM can be huge and so inflicts a DOS on the host
    I/O subsystem when dumping core for QEMU crashes

 b) guest RAM can contain alot of sensitive data belonging
    to the VM owner. This should not generally be copied
    around inside QEMU core dumps submitted to vendors for
    debugging

 c) guest RAM contents are rarely useful in diagnosing
    QEMU crashes
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Currently the QEMU processes inherit their core dump rlimit
from libvirtd, which is really suboptimal. This change allows
their limit to be directly controlled from qemu.conf instead.

With current perf framework, this patch adds support and documentation
for more perf events, including cache misses, cache references, cpu cycles,
and instructions.
Signed-off-by: NQiaowei Ren <qiaowei.ren@intel.com>

Remove the unnecessary switch since all VIR_PERF_EVENT* values are fetched

This patch rename qemuDomainGetStatsPerfRdt() to
qemuDomainGetStatsPerfOneEvent()
Signed-off-by: NQiaowei Ren <qiaowei.ren@intel.com>

Since the domain lock is not held during preparation of an external XML
config, it is possible that the value can change resulting in unexpected
failures during ABI consistency checking for some save and migrate
operations.

This patch adds a new flag to skip the checking of the cur_balloon value
and then sets the destination value to the source value to ensure
subsequent checks without the skip flag will succeed.

This way it is protected from forges and is keeped up to date too.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

The 'multi' element in PCI address struct used as 'virTristateSwitch',
and its default value is 'VIR_TRISTATE_SWITCH_ABSENT'. Current PCI
process use 'false' to initialization 'multi', which is ambiguously
for assignment or comparison. This patch use '{0}' to initialize
the whole PCI address struct, which fix the 'multi' initialization
and makes code more simplify and explicitly.
Signed-off-by: NXian Han Yu <xhyubj@linux.vnet.ibm.com>