- 30 6月, 2011 2 次提交
-
-
由 Wen Congyang 提交于
We should save domain status after modifing vcpupin. If not, we will get wrong vcpupin information after rebooting libvirtd.
-
由 Wen Congyang 提交于
virDomainVcpuPinDefFree() does not free def->cputune.vcpupin if nvcpupin is 0, and does not set def->cputune.vcpupin to NULL. If we set nvcpupin to 0 but do not free vcpupin, vcpupin will not be freed when vm->def is freed. Use VIR_FREE() instead of virDomainVcpuPinDefFree() to free the memory and set def->cputune.vcpupint to NULL.
-
- 29 6月, 2011 37 次提交
-
-
由 Eric Blake 提交于
virt-sanlock-cleanup.8 has static contents (no dependency on configure), but is generated by pod2man (a perl dependency that maintainers must have, but which ordinary tarball users need not have). Therefore, ensure that it is always part of the tarball, even though it is only conditionally installed. This is similar to commit 6db98a2d, but made simpler by the fact that the .8 page is static content. * tools/Makefile.am (EXTRA_DIST): Add virt-sanlock-cleanup.8.
-
由 Minoru Usui 提交于
If virSysinfoParse{BIOS,System,Processor,Memory}() can't find newline('\n'), these return NULL. This patch fixes this. Signed-off-by: NMinoru Usui <usui@mxm.nes.nec.co.jp>
-
由 Daniel P. Berrange 提交于
When the remote client receives end of file on the stream it never invokes the stream callback. Applications relying on async event driven I/O will thus never see the EOF condition on the stream * src/rpc/virnetclient.c, src/rpc/virnetclientstream.c: Ensure EOF is dispatched
-
由 Daniel P. Berrange 提交于
The client stream object can be used independently of the virNetClientPtr object, so must have full locking of its own and not rely on any caller. * src/remote/remote_driver.c: Remove locking around stream callback * src/rpc/virnetclientstream.c: Add locking to all APIs and callbacks
-
由 Daniel P. Berrange 提交于
* src/rpc/virnetclientstream.c: Avoid referencing NULL
-
由 Daniel P. Berrange 提交于
When a filter steals an RPC message, that message must not be freed, except by the filter code itself * src/rpc/virnetserverclient.c: Don't free stolen RPC messages
-
由 Daniel P. Berrange 提交于
Improve log messages issued when encountering a bogus message length to include the actual length and the limit violated * src/rpc/virnetmessage.c: Improve log messages
-
由 Daniel P. Berrange 提交于
On stream completion it is neccessary to send back a message with an empty payload. The message header was not being filled out correctly, since we were not writing any payload. Add a method for encoding an empty payload which updates the message headers correctly. * src/rpc/virnetmessage.c, src/rpc/virnetmessage.h: Add a virNetMessageEncodePayloadEmpty method * src/rpc/virnetserverprogram.c: Write empty payload on stream completion
-
由 Daniel P. Berrange 提交于
The RPC client treats failure to register a socket watch as non-fatal, since we do not mandate that a libvirt client application provide an event loop implementation. It is thus inappropriate to a log a message at VIR_LOG_WARN * src/rpc/virnetsocket.c: Lower logging level
-
由 Daniel P. Berrange 提交于
If a streams error is raised, virNetClientIOEventLoop returns 0, but an error is set. Check for this and propagate it if present * src/rpc/virnetclient.c: Propagate streams error
-
由 Daniel P. Berrange 提交于
If a callback being invoked from a stream issues a virStreamAbort operation, the stream data will be free'd but the callback will then still try to use this. Delay free'ing of the stream data when a callback is dispatching * src/fdstream.c: Delay stream free when callback is active
-
由 Michal Privoznik 提交于
Although we create a temporary file, it is owned by root:root and have rights 0600. In case qemu does not run under root, it is unable to write to that file and thus we transfer 0B sized file.
-
由 Matthias Bolte 提交于
addnhostsSave and hostsfileSave expect < 0 return value on error from addnhostsWrite and hostsfileWrite but then pass err instead of -err to virReportSystemError that expects an errno value. Also addnhostsWrite returns -ENOMEM and errno, change this to -errno. addnhostsWrite and hostsfileWrite tried to unlink the tempfile after renaming it, making both fail on the final step. Remove the unnecessary unlink calls.
-
由 Eric Blake 提交于
None of these instances cause any semantic differences, but consistency is nice. * src/Makefile.am: Replace leading spaces with tabs.
-
由 Osier Yang 提交于
Detected when playing with "make -C tests valgrind".
-
由 Osier Yang 提交于
-
由 Matthias Bolte 提交于
-
由 Matthias Bolte 提交于
networkSaveDnsmasqHostsfile was added in 8fa9c221 (Apr 2010). It has a force flag. If the dnsmasq hostsfile already exists force needs to be true to overwrite it. networkBuildDnsmasqArgv sets force to false, networkDefine sets it to true. This results in the hostsfile being written only in networkDefine in the common case. If no error occurred networkSaveDnsmasqHostsfile returns true and networkBuildDnsmasqArgv adds the --dhcp-hostsfile to the dnsmasq command line. networkSaveDnsmasqHostsfile was changed in 89ae9849 (24 Jun 2011) to return a new dnsmasqContext instead of reusing one. This change broke the logic of the force flag as now networkSaveDnsmasqHostsfile returns NULL on error, but the early return -- if force was not set and the hostsfile exists -- returns 0. This turned the early return in an error case and networkBuildDnsmasqArgv didn't add the --dhcp-hostsfile option anymore if the hostsfile already exists. It did because networkDefine created the hostsfile already. Then 9d4e2845 fixed the return 0 case in networkSaveDnsmasqHostsfile but didn't apply the force option correctly to the new addnhosts file. Now force doesn't control an early return anymore, but influences the handling of the hostsfile context creation and dnsmasqSave is always called now. This commit also added test cases that reveal several problems. First, the tests now calls functions that try to write the dnsmasq config files to disk. If someone runs this tests as root this might overwrite actively used dnsmasq config files, this is a no-go. Also the tests depend on configure --localstatedir, this needs to be fixed as well, because it makes the tests fail when localstatedir is different from /var. This patch does several things to fix this: 1) Move dnsmasqContext creation and saving out of networkBuildDnsmasqArgv to the caller to separate the command line generation from the config file writing. This makes the command line generation testable without the risk of interfering with system files, because the tests just don't call dnsmasqSave. 2) This refactoring of networkSaveDnsmasqHostsfile makes the force flag useless as the saving happens somewhere else now. This fixes the wrong usage of the force flag in combination with then newly added addnhosts file by removing the force flag. 3) Adapt the wrong test cases to the correct behavior, by adding the missing --dhcp-hostsfile option. Both affected tests contain DHCP host elements but missed the necessary --dhcp-hostsfile option. 4) Rename networkSaveDnsmasqHostsfile to networkBuildDnsmasqHostsfile, because it doesn't save the dnsmasqContext anymore. 5) Move all directory creations in dnsmasq context handling code from the *New functions to dnsmasqSave to avoid directory creations in system paths in the test cases. 6) Now that networkBuildDnsmasqArgv doesn't create the dnsmasqContext anymore the test case can create one with the localstatedir that is expected by the tests instead of the configure --localstatedir given one.
-
由 Matthias Bolte 提交于
Version 1.3 of <sys/sdt.h> uses this macro #define STAP_CAST(t) (size_t)t that breaks like this if t is a function remote.c:1775: error: cast from function call of type 'const char *' to non-matching type 'long unsigned int' [-Wbad-function-cast] For that to work it should probably look like this #define STAP_CAST(t) ((size_t)(t)) In systemtap 1.4 this was completely rewritten. Anyway, before commit df0b57a9 t was always a variable, but now also a function is used here, namely virNetSASLSessionGetIdentity. Use an intermediate variable to avoid this problem.
-
由 Eric Blake 提交于
./autobuild.sh died on several messages resembling: ../../src/rpc/virnetsocket.c: In function 'virNetSocketNewListenTCP': ../../src/rpc/virnetsocket.c:231:9: error: implicit declaration of function 'bind_used_without_requesting_gnulib_module_bind' [-Wimplicit-function-declaration] ../../src/rpc/virnetsocket.c:231:9: error: nested extern declaration of 'bind_used_without_requesting_gnulib_module_bind' [-Wnested-externs] Basically, gnulib socket fds are not safe to pass to mingw socket functions unless we pull in those gnulib modules. * bootstrap.conf (gnulib_modules): Add modules to handle socket functions on mingw.
-
由 Eric Blake 提交于
Detected by gcc -O2, introduced in commit 532ce9c2. If dmidecode outputs a field unrecognized by the parsers, then the code would dereference an uninitialized eol variable. * src/util/sysinfo.c (virSysinfoParseBIOS) (virSysinfoParseSystem, virSysinfoParseProcessor) (virSysinfoParseMemory): Avoid uninitialized variable.
-
由 Eric Blake 提交于
The last patch was incomplete. The translated strings merely moved between generated file names, rather than disappearing. * cfg.mk (generated_files): Update generated file names. * po/POTFILES.in: Add remote_dispatch.h
-
由 Jiri Denemark 提交于
daemon/remote_dispatch_bodies.h is no longer with us and shouldn't be searched for translatable strings.
-
由 Jiri Denemark 提交于
-
由 Eric Blake 提交于
Detected by gcc -O2: remote/remote_driver.c: In function 'doRemoteOpen': remote/remote_driver.c:2753:26: error: 'sasl' may be used uninitialized in this function [-Werror=uninitialized] * src/remote/remote_driver.c (remoteAuthSASL): Initialize sasl.
-
由 Eric Blake 提交于
Problem introduced in commit 6818cf86. * src/remote_protocol-structs: Delete unused struct.
-
由 Eric Blake 提交于
* libvirt.spec.in (with_sanlock): Only default on in rawhide. Reported by Gerhard Stenzel.
-
由 Daniel P. Berrange 提交于
Add a page which documents how to configure lock managers, focusing on use of sanlock with the QEMU/KVM driver * docs/locking.html.in: Docs about lock managers * docs/sitemap.html.in: Add lock manager config to the deployment section
-
由 Daniel P. Berrange 提交于
The current sanlock plugin requires a central management application to manually add <lease> elements to each guest, to protect resources that are assigned to it (eg writable disks). This makes the sanlock plugin useless for usage in more ad hoc deployment environments where there is no central authority to associate disks with leases. This patch adds a mode where the sanlock plugin will automatically create leases for each assigned read-write disk, using a md5 checksum of the fully qualified disk path. This can work pretty well if guests are using stable disk paths for block devices eg /dev/disk/by-path/XXXX symlinks, or if all hosts have NFS volumes mounted in a consistent pattern. The plugin will create one lockspace for managing disks with filename /var/lib/libvirt/sanlock/__LIBVIRT__DISKS__. For each VM disks, there will be another file to hold a lease /var/lib/libvirt/sanlock/5903e5d25e087e60a20fe4566fab41fd Each VM disk lease is usually 1 MB in size. The script virt-sanlock-cleanup should be run periodically to remove unused lease files from the lockspace directory. To make use of this capability the admin will need to do several tasks: - Mount an NFS volume (or other shared filesystem) on /var/lib/libvirt/sanlock - Configure 'host_id' in /etc/libvirt/qemu-sanlock.conf with a unique value for each host with the same NFS mount - Toggle the 'auto_disk_leases' parameter in qemu-sanlock.conf Technically the first step can be skipped, in which case sanlock will only protect against 2 vms on the same host using the same disk (or the same VM being started twice due to error by libvirt). * src/locking/libvirt_sanlock.aug, src/locking/sanlock.conf, src/locking/test_libvirt_sanlock.aug: Add config params for configuring auto lease setup * libvirt.spec.in: Add virt-sanlock-cleanup program, man page * tools/virt-sanlock-cleanup.in: Script to purge unused disk resource lease files
-
由 Daniel P. Berrange 提交于
Introduce a configuration file with a single parameter 'require_lease_for_disks', which is used to decide whether it is allowed to start a guest which has read/write disks, but without any leases. * libvirt.spec.in: Add sanlock config file and augeas lens * src/Makefile.am: Install sanlock config file and augeas lens * src/locking/libvirt_sanlock.aug: Augeas master lens * src/locking/test_libvirt_sanlock.aug: Augeas test file * src/locking/sanlock.conf: Example sanlock config * src/locking/lock_driver_sanlock.c: Wire up loading of configuration file
-
由 Daniel P. Berrange 提交于
Allow a 'configFile' parameter to be passed into the lock drivers to provide configuration. Wire up the QEMU driver to pass in file names '/etc/libvirt/qemu-$NAME.conf eg qemu-sanlock.conf * src/locking/lock_driver.h, src/locking/lock_driver_nop.c, src/locking/lock_driver_sanlock.c, src/locking/lock_manager.c, src/locking/lock_manager.h: Add configFile parameter * src/qemu/qemu_conf.c: Pass in configuration file path to lock driver plugins
-
由 Laine Stump 提交于
If a domain name is defined for a network, add the --expand-hosts option to the dnsmasq commandline. This results in the domain being added to any hostname that is defined in a dns <host> element and contains no '.' characters (i.e. it is an "unqualified" hostname). Since PTR records are automatically created for any name defined in <host>, the result of a PTR request will change from the unqualified name to the qualified name. This also has the same effect on any hostnames that dnsmasq reads from the host's /etc/hosts file. (In the case of guest hostnames that were learned by dnsmasq via DHCP requests, they were already getting the domain name added on, even without --expand-hosts).
-
由 Daniel P. Berrange 提交于
The standard remote protocol for libvirtd no longer needs to include definitions of the generic message header/error structs or status codes. This is all defined in the generic RPC protocol * src/remote/remote_protocol.x: Remove all RPC message definitions * src/remote/remote_protocol.h, src/remote/remote_protocol.c: Re-generate * daemon/remote_generate_stubs.pl: Delete obsolete script
-
由 Daniel P. Berrange 提交于
libvirtd now uses the generic RPC code for MDNS, so its custom mdns APIs are no longer required * daemon/mdns.c, daemon/mdns.h: Removed obsolete files
-
由 Daniel P. Berrange 提交于
This guts the libvirtd daemon, removing all its networking and RPC handling code. Instead it calls out to the new virServerPtr APIs for all its RPC & networking work As a fallout all libvirtd daemon error reporting now takes place via the normal internal error reporting APIs. There is no need to call separate error reporting APIs in RPC code, nor should code use VIR_WARN/VIR_ERROR for reporting fatal problems anymore. * daemon/qemu_dispatch_*.h, daemon/remote_dispatch_*.h: Remove old generated dispatcher code * daemon/qemu_dispatch.h, daemon/remote_dispatch.h: New dispatch code * daemon/dispatch.c, daemon/dispatch.h: Remove obsoleted code * daemon/remote.c, daemon/remote.h: Rewrite for new dispatch APIs * daemon/libvirtd.c, daemon/libvirtd.h: Remove all networking code * daemon/stream.c, daemon/stream.h: Update for new APIs * daemon/Makefile.am: Link to libvirt-net-rpc-server.la
-
由 Daniel P. Berrange 提交于
This guts the current remote driver, removing all its networking handling code. Instead it calls out to the new virClientPtr and virClientProgramPtr APIs for all RPC & networking work. * src/Makefile.am: Link remote driver with generic RPC code * src/remote/remote_driver.c: Gut code, replacing with RPC API calls * src/rpc/gendispatch.pl: Update for changes in the way streams are handled
-
由 Daniel P. Berrange 提交于
* src/Makefile.am: Add XDR_CFLAGS
-
- 28 6月, 2011 1 次提交
-
-
由 Daniel P. Berrange 提交于
The libvirt sanlock plugin is intentionally leaking a file descriptor to QEMU. To enable QEMU to use this FD under SELinux, it must be labelled correctly. We dont want to use the svirt_image_t for this, since QEMU must not be allowed to actually use the FD. So instead we label it with svirt_t using virSecurityManagerSetProcessFDLabel * src/locking/domain_lock.c, src/locking/domain_lock.h, src/locking/lock_driver.h, src/locking/lock_driver_nop.c, src/locking/lock_driver_sanlock.c, src/locking/lock_manager.c, src/locking/lock_manager.h: Optionally pass an FD back to the hypervisor for security driver labelling * src/qemu/qemu_process.c: label the lock manager plugin FD with the process label
-