- 14 3月, 2019 1 次提交
-
-
由 Jim Fehlig 提交于
All Xen domains have a xenbus device. Implicitly add one if not already explicitly specified in the domain config. Signed-off-by: NJim Fehlig <jfehlig@suse.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
-
- 12 4月, 2018 1 次提交
-
-
由 Jim Fehlig 提交于
All Xen PV and HVM with PV driver support a memory balloon device, which cannot be disabled through the toolstack. Model the device in the libxl driver, similar to the recently removed xend-based driver. Signed-off-by: NJim Fehlig <jfehlig@suse.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
-
- 10 4月, 2018 1 次提交
-
-
由 Jim Fehlig 提交于
In preparation of removing the legacy Xen driver, move the sexpr2xml tests from WITH_XEN to WITH_LIBXL. Even though the legacy driver will be removed, we'll want to maintain the ability to convert sexpr to XML. Requires fixing up the tests to account for different behavior of Xen vs libxl post parse functions. There is some test file fallout due to differences in handling of default values between xend and libxl. Signed-off-by: NJim Fehlig <jfehlig@suse.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
-
- 17 10月, 2017 1 次提交
-
-
由 Peter Krempa 提交于
Express a properly terminated backing chain by putting a virStorageSource of type VIR_STORAGE_TYPE_NONE in the chain. The newly used helpers simplify this greatly. The change fixes a bug as formatting an incomplete backing chain and parsing it back would end up in expressing a terminated chain since src->backingStoreRaw was not populated. By relying on the terminator object this can be now processed appropriately.
-
- 27 1月, 2016 1 次提交
-
-
由 Pavel Hrdina 提交于
The current code was a little bit odd. At first we've removed all possible implicit input devices from domain definition to add them later back if there was any graphics device defined while parsing XML description. That's not all, while formating domain definition to XML description we at first ignore any input devices with bus different to USB and VIRTIO and few lines later we add implicit input devices to XML. This seems to me as a lot of code for nothing. This patch may look to be more complicated than original approach, but this is a preferred way to modify/add driver specific stuff only in those drivers and not deal with them in common parsing/formating functions. The update is to add those implicit input devices into config XML to follow the real HW configuration visible by guest OS. There was also inconsistence between our behavior and QEMU's in the way, that in QEMU there is no way how to disable those implicit input devices for x86 architecture and they are available always, even without graphics device. This applies also to XEN hypervisor. VZ driver already does its part by putting correct implicit devices into live XML. Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
- 09 12月, 2015 1 次提交
-
-
由 Pavel Hrdina 提交于
This change ensures to call driver specific post-parse code to modify domain definition after parsing hypervisor config the same way we do after parsing XML. Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
- 24 4月, 2014 1 次提交
-
-
由 Jiri Denemark 提交于
This patch implements formating and parsing code for the backing store schema defined and documented by the previous patch. This patch does not aim at providing full persistent storage of disk backing chains yet. The formatter is supposed to provide the backing chain detected when starting a domain and thus it is not formatted into an inactive domain XML. The parser is implemented mainly for the purpose of testing the XML generated by the formatter and thus it does not distinguish between no backingStore element and an empty backingStore element. This will have to change once we fully implement support for user-supplied backing chains. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 09 5月, 2012 1 次提交
-
-
由 Osier Yang 提交于
<vcpu> is not an optional node. The value for its 'placement' actually always defaults to 'static' in the underlying codes. (Even no 'cpuset' and 'placement' is specified, the domain process will be pinned to all the available pCPUs).
-
- 02 4月, 2012 1 次提交
-
-
由 Philipp Hahn 提交于
XenD-3.1 introduced managed domains. HV-domains have rtc_timeoffset (hgd24f37b31030 from 2007-04-03), which tracks the offset between the hypervisors clock and the domains RTC, and is persisted by XenD. In combination with localtime=1 this had a bug until XenD-3.4 (hg5d701be7c37b from 2009-04-01) (I'm not 100% sure how that bug manifests, but at least for me in TZ=Europe/Berlin I see the previous offset relative to utc being applied to localtime again, which manifests in an extra hour being added) XenD implements the following variants for clock/@offset: - PV domains don't have a RTC → 'localtime' | 'utc' - <3.1: no managed domains → 'localtime' | 'utc' - ≥3.1: the offset is tracked for HV → 'variable' due to the localtime=1 bug → 'localtime' | 'utc' - ≥3.4: the offset is tracked for HV → 'variable' Current libvirtd still thinks XenD only implements <clock offset='utc'/> and <clock offset='localtime'/>, which is wrong, since the semantic of 'utc' and 'localtime' specifies, that the offset will be reset on domain-restart, while with 'variable' the offset is kept. (keeping the offset over "virsh edit" is important, since otherwise the clock might jump, which confuses certain guest OSs) xendConfigVersion was last incremented to 4 by the xen-folks for xen-3.1.0. I know of no way to reliably detect the version of XenD (user space tools), which may be different from the version of the hypervisor (kernel) version! Because of this only the change from 'utc'/'localtime' to 'variable' in XenD-3.1 is handled, not the buggy behaviour of XenD-3.1 until XenD-3.4. For backward compatibility with previous versions of libvirt Xen-HV still accepts 'utc' and 'localtime', but they are returned as 'variable' on the next read-back from Xend to libvirt, since this is what XenD implements: The RTC is NOT reset back to the specified time on next restart, but the previous offset is kept. This behaviour can be turned off by adding the additional attribute adjustment='reset', in which case libvirt will report an error instead of doing the conversion. The attribute can also be used as a shortcut to offset='variable' with basis='...'. With these changes, it is also necessary to adjust the xen tests: "localtime = 0" is always inserted, because otherwise on updates the value is not changed within XenD. adjustment='reset' is inserted for all cases, since they're all < XEND_CONFIG_VERSION_3_1_0, only 3.1 introduced persistent rtc_timeoffset. Some statements change their order because code was moved around. Signed-off-by: NPhilipp Hahn <hahn@univention.de>
-
- 08 3月, 2012 1 次提交
-
-
由 Eric Blake 提交于
Make it obvious to 'dumpxml' readers what unit we are using, since our default of KiB for memory (1024) differs from qemu's default of MiB; and differs from our use of bytes for storage. Tests were updated via: $ find tests/*data tests/*out -name '*.xml' | \ xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/" $ find tests/*data tests/*out -name '*.xml' | \ xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/" followed by a few fixes for the stragglers. Note that with this patch, the RNG for <memory> still forbids validation of anything except unit='KiB', since the code silently ignores the attribute; a later patch will expand <memory> to allow scaled input in the code and update the RNG to match. * docs/schemas/basictypes.rng (unit): Add 'bytes'. (scaledInteger): New define. * docs/schemas/storagevol.rng (sizing): Use it. * docs/schemas/storagepool.rng (sizing): Likewise. * docs/schemas/domaincommon.rng (memoryKBElement): New define; use for memory elements. * src/conf/storage_conf.c (virStoragePoolDefFormat) (virStorageVolDefFormat): Likewise. * src/conf/domain_conf.h (_virDomainDef): Document unit used internally. * src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef): Likewise. * tests/*data/*.xml: Update all tests. * tests/*out/*.xml: Likewise. * tests/define-dev-segfault: Likewise. * tests/openvzutilstest.c (testReadNetworkConf): Likewise. * tests/qemuargv2xmltest.c (blankProblemElements): Likewise.
-
- 29 7月, 2010 1 次提交
-
-
由 Cole Robinson 提交于
All <console> devices now export a <target> type attribute. QEMU defaults to 'serial', UML defaults to 'uml, xen can be either 'serial' or 'xen' depending on fullvirt. Understandably there is lots of test fallout. This will be used to differentiate between a serial vs. virtio console for QEMU. Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
- 25 7月, 2008 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 08 5月, 2008 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 26 4月, 2008 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 10 8月, 2007 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 09 10月, 2006 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 12 9月, 2006 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 24 8月, 2006 1 次提交
-
-
由 Daniel P. Berrange 提交于
-