The libxl_device_nic structure supports specifying an outgoing rate
limit based on a time interval and bytes allowed per interval. In xl
config a rate limit is specified as "<RATE>/s@<INTERVAL>". INTERVAL
is optional and defaults to 50ms.

libvirt expresses outgoing limits by average (required), peak, burst,
and floor attributes in units of KB/s. This patch supports the outgoing
bandwidth limit by converting the average KB/s to bytes per interval
based on the same default interval (50ms) used by xl.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Both xm and xl config have long supported specifying vif rate
limiting, e.g.

vif = [ 'mac=00:16:3E:74:3d:76,bridge=br0,rate=10MB/s' ]

Add support for mapping rate to and from <bandwidth> in the xenconfig
parser and formatter. rate is mapped to the required 'average' attribute
of the <outbound> element, e.g.

  <interface type='bridge'>
    ...
    <bandwidth>
      <outbound average='10240'/>
    </bandwidth>
  </interface>

Also add a unit test to check the conversion logic.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

The xen sexpr config format has long supported specifying vif rate
limiting, e.g.

  (device
    (vif
      (mac '00:16:3e:1b:b1:47')
      (rate '10240KB/s')
      ...
    )
  )

Add support for mapping rate to and from <bandwidth> in the xenconfig
sexpr parser and formatter. rate is mapped to the required 'average'
attribute of the <outbound> element, e.g.

  <interface type='bridge'>
    ...
    <bandwidth>
      <outbound average='10240'/>
    </bandwidth>
  </interface>

Also add unit tests to check the conversion logic.

This patch benefits both the old xen driver and the libxl driver.
Both drivers gain support for vif bandwidth when converting to/from
domXML and xen-sxpr. In addition, the old xen driver will now be
able to handle vif 'rate' setting when communicating with xend.

We weren't checking for failure of qemuCaps lookup

Somehow I managed to backspace over the newline between the closing
brace and goto cleanup; in commit 36e244f3.

Rather than open coding calls. I can't see any reason not to

Rather than open coding calls. I can't see any reason not to

Should be a no-op

This should be a no-op

This should be a no-op

To get rid of a giant if-else block which is very easy to get lost in.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

memory_dirty_rate corresponds to dirty-pages-rate in QEMU and
memory_iteration is what QEMU reports in dirty-sync-count.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The enum will be called qemuMonitorMigrationStatus.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The structure actually contains migration statistics rather than just
the status as the name suggests. Renaming it as
qemuMonitorMigrationStats removes the confusion.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

A migration is in "setup" state after it was "inactive" and before it
becomes "active". Let's reflect this in our migration status enum.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Those parameters should be in opposite order.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Let's use the new virTestDifferenceFull function that will regenerate
the expected output and fail the test to let developer know that there
something was updated.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

This patch enable regeneration of expected output file for
virTestDifferenceFull.  It also introduces new
virTestDifferenceFullNoRegenerate function for special cases, where we
don't want to regenerate output.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

When this flag is specified, some of the expected output files will be
regenerated with the actual output data.  Use helper function like for
other flags.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

This patch partially reverts previous commit 91a00424 and moves the post
parse function to xenParseSxpr.  This update is required because xen
driver calls xenParseSxpr directly.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

It was added by mistake before the 'If' by commit 71408079.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

My commit 674afcb0 moved computing the
default listen address from qemuMigrationPrepareAny to
qemuMigrationPrepareIncoming. However, I didn't notice listenAddress was
later passed to qemuMigrationStartNBDServer. Thus, it would be called
with the original value of listenAddress (NULL).

Let's add the updated listen address to qemuProcessIncomingDef and use
it when starting NBD servers.
Reported-by: NMichael Chapman <mike@very.puzzling.org>
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

A new --timestamp option for event virsh command can be used to print
timestamp of each event.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

To reduce code duplication.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Most of the changes to the list of active and inactive PCI devices
happen in virHostdev, where they are properly logged.

virPCIDeviceDetach() and virPCIDeviceReattach(), however, change the
inactive list as well, so they should be logging similar messages.

Instead of misusing a const string to hold up runtime allocated
data, introduce new variable @hoststr and obey const correctness.

==6879== 15 bytes in 1 blocks are definitely lost in loss record 68 of 1,064
==6879==    at 0x4C29F80: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==6879==    by 0xA7DDF97: vasprintf (in /lib64/libc-2.21.so)
==6879==    by 0x552BBC6: virVasprintfInternal (virstring.c:493)
==6879==    by 0x552BCDB: virAsprintfInternal (virstring.c:514)
==6879==    by 0x54FA44C: virLogHostnameString (virlog.c:468)
==6879==    by 0x54FAB0F: virLogVMessage (virlog.c:645)
==6879==    by 0x54FA680: virLogMessage (virlog.c:531)
==6879==    by 0x54FBBF4: virLogParseOutputs (virlog.c:1130)
==6879==    by 0x11CB4F: daemonSetupLogging (libvirtd.c:685)
==6879==    by 0x11E137: main (libvirtd.c:1297)
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Once @hostname is printed into @hoststr we don't need it anymore.

==6879== 5 bytes in 1 blocks are definitely lost in loss record 10 of 1,064
==6879==    at 0x4C29F80: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==6879==    by 0xA7ED599: strdup (in /lib64/libc-2.21.so)
==6879==    by 0x552C126: virStrdup (virstring.c:726)
==6879==    by 0x553B13E: virGetHostnameImpl (virutil.c:720)
==6879==    by 0x553B1BF: virGetHostnameQuiet (virutil.c:741)
==6879==    by 0x54FA3FD: virLogHostnameString (virlog.c:462)
==6879==    by 0x54FAB0F: virLogVMessage (virlog.c:645)
==6879==    by 0x54FA680: virLogMessage (virlog.c:531)
==6879==    by 0x54FBBF4: virLogParseOutputs (virlog.c:1130)
==6879==    by 0x11CB4F: daemonSetupLogging (libvirtd.c:685)
==6879==    by 0x11E137: main (libvirtd.c:1297)
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The *event --loop commands would keep running even though a connection
to libvirtd is lost. This doesn't make a lot of sense since clearly we
won't get any new events from the closed connection.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

virshCatchDisconnect expects ctl, but we were just passing NULL instead.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

If user defines a virtio channel with UNIX socket backend and doesn't
care about the path for the socket (e.g. qemu-agent channel), we still
generate it into the persistent XML.  Moreover when then user renames
the domain, due to its persistent socket path saved into the per-domain
directory, it will not start.  So let's forget about old generated paths
and also stop putting them into the persistent definition.

https://bugzilla.redhat.com/show_bug.cgi?id=1278068Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

When doing a memory-only snapshot libvirt would still issue the
'transaction' command without any disk. Skip it if it isn't necessary.

If no port number was provided for a storage pool libvirt defaults to
port 6789; however, librbd/librados already default to 6789 when no port
number is provided.

In the future Ceph will switch to a new port for the Ceph monitors since
port 6789 is already assigned to a different application by IANA.

Port 6789 is assigned to SMC-HTTPS and Ceph now has port 3300 assigned as
the 'Ceph monitor' port.

In this case it is the best solution to not hardcode any port number into
libvirt and let librados handle the connection.

Only if a user specifies a different port number we pass it down to librados,
otherwise we leave it blank.
Signed-off-by: NWido den Hollander <wido@widodh.nl>

merge

It could happen that rbd_list() returns X names, but that while
refreshing the pool one of those RBD images is removed from Ceph
through a different route then libvirt.

We do not need to error out in such case, we can simply ignore the
volume and continue.

  error : volStorageBackendRBDRefreshVolInfo:289 :
    failed to open the RBD image 'vol-998': No such file or directory

It could also be that one or more Placement Groups (PGs) inside Ceph
are inactive due to a system failure.

If that happens it could be that some RBD images can not be refreshed
and a timeout will be raised by librados.

  error : volStorageBackendRBDRefreshVolInfo:289 :
    failed to open the RBD image 'vol-893': Connection timed out

Ignore the error and continue to refresh the rest of the pool's
contents.
Signed-off-by: NWido den Hollander <wido@widodh.nl>

It could be that we error out while the RBD image has not been
opened yet. This would cause us to call rbd_close() on pointer
which has not been initialized.

Set it to NULL by default and only close if it is not NULL.
Signed-off-by: NWido den Hollander <wido@widodh.nl>

Currently pkg build of master branch fails:

[  300s] + /usr/lib/rpm/brp-boot-scripts
[  300s] E: File `virtlogd' is missing `Required-Start', please add even if empty!
[  300s] W: File `virtlogd' is missing `Required-Stop', please add even if empty!
[  300s] E: File `virtlogd' has empty `Default-Start', please specify default runlevel(s)!
[  300s] ERROR: found one or more broken init or boot scripts, please fix them.
[  300s]        For more information about LSB headers please read the manual
[  300s]        page of of insserv by executing the command `man 8 insserv'.
[  300s]        If you don't understand this, mailto=werner@suse.de
[  300s] error: Bad exit status from /var/tmp/rpm-tmp.44965 (%install)

Add the required tags, fix the existing tags.
Use soft dependency "Should-Start" because virtlogd may work without network.
Signed-off-by: NOlaf Hering <olaf@aepfle.de>

The virtlogd initscript's lock file should go in /var/lock/subsys/, not
(the nonexistent) /var/log/subsys/.
Signed-off-by: NMichael Chapman <mike@very.puzzling.org>

Signed-off-by: NMichael Chapman <mike@very.puzzling.org>