- 24 6月, 2010 1 次提交
-
-
由 Matthias Bolte 提交于
The domain XML parsing code autogenerates disk address and controller elements when they are not explicitly specified. The code assumes a narrow SCSI bus (7 units per bus). ESX uses a wide SCSI bus (16 units per bus). This is a step towards controller support for the ESX driver.
-
- 26 5月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
Allow for a host UUID in the capabilities XML. Local drivers will initialize this from the SMBIOS data. If a sanity check shows SMBIOS uuid is invalid, allow an override from the libvirtd.conf configuration file * daemon/libvirtd.c, daemon/libvirtd.conf: Support a host_uuid configuration option * docs/schemas/capability.rng: Add optional host uuid field * src/conf/capabilities.c, src/conf/capabilities.h: Include host UUID in XML * src/libvirt_private.syms: Export new uuid.h functions * src/lxc/lxc_conf.c, src/qemu/qemu_driver.c, src/uml/uml_conf.c: Set host UUID in capabilities * src/util/uuid.c, src/util/uuid.h: Support for host UUIDs * src/node_device/node_device_udev.c: Use the host UUID functions * tests/confdata/libvirtd.conf, tests/confdata/libvirtd.out: Add new host_uuid config option to test
-
- 10 3月, 2010 1 次提交
-
-
由 Eric Blake 提交于
* global: patch created by running: for f in $(git ls-files '*.[ch]') ; do cppi $f > $f.t && mv $f.t $f done
-
- 18 12月, 2009 1 次提交
-
-
由 Jiri Denemark 提交于
* include/libvirt/virterror.h src/util/virterror.c: add new domain VIR_FROM_CPU for errors * src/conf/cpu_conf.c src/conf/cpu_conf.h: new parsing module * src/Makefile.am proxy/Makefile.am: include new files * src/conf/capabilities.[ch] src/conf/domain_conf.[ch]: reference new code * src/libvirt_private.syms: private export of new entry points
-
- 08 12月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
Now that drivers are using a private domain object state blob, the virDomainObjFormat/Parse methods are no longer able to directly serialize all neccessary state to/from XML. It is thus neccessary to introduce a pair of callbacks fo serializing private state. The code for serializing vCPU PIDs and the monitor device config can now move out of domain_conf.c and into the qemu_driver.c where they belong. * src/conf/capabilities.h: Add callbacks for serializing private state to/from XML * src/conf/domain_conf.c, src/conf/domain_conf.h: Remove the monitor, monitor_chr, monitorWatch, nvcpupids and vcpupids fields from virDomainObjPtr. Remove code that serialized those fields * src/libvirt_private.syms: Export virXPathBoolean * src/qemu/qemu_driver.c: Add callbacks for serializing monitor and vcpupid data to/from XML * src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Pass monitor char device config into qemuMonitorOpen directly.
-
- 03 11月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
The virDomainObjPtr object stores state about a running domain. This object is shared across all drivers so it is not appropriate to include driver specific state here. This patch adds the ability to request a blob of private data per domain object instance. The driver must provide a allocator & deallocator for this purpose THis patch abuses the virCapabilitiesPtr structure for storing the allocator/deallocator callbacks, since it is already being abused for other internal things relating to parsing. This should be moved out into a separate object at some point. * src/conf/capabilities.h: Add privateDataAllocFunc and privateDataFreeFunc fields * src/conf/domain_conf.c: Invoke the driver allocators / deallocators when creating/freeing virDomainObjPtr instances. * src/conf/domain_conf.h: Pass virCapsPtr into virDomainAssignDef to allow access to the driver specific allocator function * src/lxc/lxc_driver.c, src/opennebula/one_driver.c, src/openvz/openvz_driver.c, src/qemu/qemu_driver.c, src/test/test_driver.c, src/uml/uml_driver.c: Update for change in virDomainAssignDef contract
-
- 12 10月, 2009 1 次提交
-
-
由 Mark McLoughlin 提交于
If one has e.g. <guest> <os_type>hvm</os_type> <arch name='x86_64'> <wordsize>64</wordsize> <emulator>/usr/bin/qemu-system-x86_64</emulator> <machine>pc-0.11</machine> <machine canonical='pc-0.11'>pc</machine> <machine>pc-0.10</machine> <machine>isapc</machine> <domain type='qemu'> </domain> <domain type='kvm'> <emulator>/usr/bin/kvm</emulator> <machine>pc</machine> <machine>isapc</machine> </domain> </arch> </guest> and start a guest with: <domain type='kvm'> ... <os> <type arch='x86_64'>hvm</type> ... </os> </domain> then the default machine type should be 'pc' and not 'pc-0.11' Issue was reported by Anton Protopopov. * src/capabilities.[ch]: pass the domain type to virCapabilitiesDefaultGuestArch() and use it to look up the default machine type from a specific guest domain if needed. * src/conf/domain_conf.c, src/xen/xm_internal.c: update * tests/qemuxml2argvdata/qemuxml2argv-machine-aliases2.xml: update the domain type to 'kvm' and remove the machine type to check that the default gets looked up correctly
-
- 21 9月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
* src/capabilities.c, src/capabilities.h, src/domain_conf.c, src/domain_conf.h, src/domain_event.c, src/domain_event.h, src/interface_conf.c, src/interface_conf.h, src/network_conf.c, src/network_conf.h, src/node_device_conf.c, src/node_device_conf.h, src/secret_conf.c, src/secret_conf.h, src/storage_conf.c, src/storage_conf.h, src/storage_encryption_conf.c, src/storage_encryption_conf.h: Move to src/conf/ * src/Makefile.am: Add -Isrc/conf to the individual build targets which need to use XML config APIs. Remove LIBXML_CFLAGS, LIBSSH2_CFLAGS and SELINUX_CFLAGS from global INCLUDES and only have them in build targets which actually need them. Create a libvirt_conf.la convenience library for all config parsers * src/hostusb.h: Remove bogus include of domain_conf.h * tests/Makefile.am: Add -Isrc/conf. Remove bogus -I$builddir/src since it never has any generated header files * daemon/Makefile.am: Add -Isrc/conf * proxy/Makefile.am: Add -Isrc/conf and cope with renamed files * src/hash.c: Remove bogus include of libxml/threads.h
-
- 27 7月, 2009 2 次提交
-
-
由 Mark McLoughlin 提交于
By probing for qemu machine types, we increased the time of a GetCapabilities call from 100us to a whopping 60ms. This patch takes the approach of only probing for machine types when the mtime of the emulator binary changed since the last time the capabilities were generated. * src/capabilities.h: cache the emulator binary mtime * src/qemu_conf.c: add qemudGetOldMachines() to copy the machine types from the old caps struct if the mtime for the binary hasn't changed * src/qemu_conf.h, src/qemu_driver.c: pass the old caps pointer to qemudCapsInit()
-
由 Mark McLoughlin 提交于
A subsequent commit will add a "canonical" field to this structure, this patch basically just prepares the way for that. The new type is added, along with virCapabilitiesAlloc/FreeMachines() helpers and a whole bunch of code to make the transition. One quirk is that virCapabilitiesAddGuestDomain() and virCapabilitiesAddGuest() take ownership of the machine list rather than duping it. This makes sense to avoid needless copying. * src/capabilities.h: add the virCapsGuestMachine struct and use it in virCapsGuestDomainInfo, add prototypes for new functions and update the AddGuest() prototypes * src/capabilities.c: add code for allocating and freeing the new type, change the machines parameter to AddGuest() etc. * src/libvirt_private.syms: export the new helpers * src/qemu_conf.c: update all the machine type code to use the new struct * src/xen_internal.c: ditto * tests/testutilsqemu.c: ditto
-
- 29 6月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 16 6月, 2009 1 次提交
-
-
由 Cole Robinson 提交于
Certain drivers always need an 'emulator' specified in the XML (qemu and lxc at least). Store this info in capabilities. We will eventually use this to move default emulator handling out of drivers and into domain_conf.*
-
- 24 3月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 03 3月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 31 1月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 24 10月, 2008 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 11 4月, 2008 1 次提交
-
-
由 Jim Meyering 提交于
Done with these commands: git grep -l Local.variab|xargs \ perl -0x3b -pi -e 's,\n+/\*\n \* vim:(.|\n)*,\n,' git grep -l Local.variab|xargs \ perl -0x3b -pi -e 's,\n+/\*\n \* Local variables:\n(.|\n)*,\n,'
-
- 27 2月, 2008 2 次提交
-
-
由 Jim Meyering 提交于
* src/capabilities.c: Include <config.h> from the .c file, * src/capabilities.h: ... not from the .h file.
-
由 Daniel P. Berrange 提交于
-