There are some small issue in qemuProcessAttach:

1.Fix virSecurityManagerGetProcessLabel always get pid = 0,
move 'vm->pid = pid' before call virSecurityManagerGetProcessLabel.

2.Use virSecurityManagerGenLabel to get image label.

3.Fix always set selinux label for other security driver label.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1169183Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1169183Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

When a block{commit,copy} job was aborted on a domain, block job handler
did not process it correctly, leaving a phantom job in the background.
Any further calls to any blockjob causes "block <jobtype> still active"
error. This patch fixes the blockjob handler so that it checks not only
for VIR_DOMAIN_BLOCK_JOB_FAILED status, but VIR_DOMAIN_BLOCK_JOB_CANCELED
status as well, followed by our existing cleanup routine.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1135169Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

If job is failed in qemuMigrationRun, we expect the jobinfo type as
FAILED. But jobinfo type won't be updated until entering
qemuMigrationWaitForCompletion. We should make it updated in all
conditions. Moreover, we can't use qemuMigrationUpdateJobStatus
here because job may fail in libvirt, so we can't query job status
from QEMU.
Signed-off-by: NWang Rui <moon.wangrui@huawei.com>

The migration job status is traced in qemuMigrationUpdateJobStatus
which is called in qemuMigrationRun. But if migration is cancelled
before the trace such as in qemuMigrationDriveMirror, the jobinfo
type won't be updated to CANCELLED. After this patch, we can get
jobinfo type CANCELLED if migration is cancelled during drive
mirror.  Moreover, we can't use qemuMigrationUpdateJobStatus
because from qemu's point of view it's just the drive mirror being
cancelled and the migration hasn't even started yet.
Signed-off-by: NWang Rui <moon.wangrui@huawei.com>

When I pasted some XML from libvirt.org, I've found a small mistake.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1160084

As of b6d4dad1 (1.2.5) we are trying to keep the status of FSFreeze
in the guest. Even though I've tried to fixed couple of corner cases
(6ea54769), it occurred to me just recently, that the approach is
broken by design. Firstly, there are many other ways to talk to
qemu-ga (even through libvirt) that filesystems can be thawed (e.g.
qemu-agent-command) without libvirt noticing. Moreover, there are
plenty of ways to thaw filesystems without even qemu-ga noticing (yes,
qemu-ga keeps internal track of FSFreeze status). So, instead of
keeping the track ourselves, or asking qemu-ga for stale state, it's
the best to let qemu-ga deal with that (and possibly let guest kernel
propagate an error).

Moreover, there's one bug with the following approach, if fsfreeze
command failed, we've executed fsthaw subsequently. So issuing
domfsfreeze in virsh gave the following result:

virsh # domfsfreeze gentoo
Froze 1 filesystem(s)

virsh # domfsfreeze gentoo
error: Unable to freeze filesystems
error: internal error: unable to execute QEMU agent command 'guest-fsfreeze-freeze': The command guest-fsfreeze-freeze has been disabled for this instance

virsh # domfsfreeze gentoo
Froze 1 filesystem(s)

virsh # domfsfreeze gentoo
error: Unable to freeze filesystems
error: internal error: unable to execute QEMU agent command 'guest-fsfreeze-freeze': The command guest-fsfreeze-freeze has been disabled for this instance
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

virReportSystemError is reserved for reporting system errors, calling it
with VIR_ERR_* error codes produces error messages that do not make any
sense, such as

    internal error: guest failed to start: Kernel doesn't support user
    namespace: Link has been severed

We should prohibit wrong usage with a syntax-check rule.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

It looks like it was copy-pasted, so in case anyone wonders what some of
those methods do without looking at them, and for the sake of
completeness, fix them.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This reverts commit 433b427f.

The patch was added in order to overcome a bug in iproute2 and since it
was properly identified as a bug, particularly in openSUSE 13.2, and it
is being worked on [1], the best solution for libvirt seems to be to
keep the old behaviour.

[1] https://bugzilla.novell.com/show_bug.cgi?id=907093

Starting from libvirt-1.2.4, network state XML files moved to another
directory (see commit b9e95491) and libvirt automatically migrates the
network state files to a new location. However, the code used
dirent.d_type which is not supported by all filesystems. Thus, when
libvirt was upgraded on a host which used such filesystem, network state
XMLs were not properly moved and running networks disappeared from
libvirt.

This patch falls back to lstat() whenever dirent.d_type is DT_UNKNOWN to
fix this issue.

https://bugzilla.redhat.com/show_bug.cgi?id=1167145Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Commit 7557ddf8 added some additional block.* stats to
virDomainListGetStats, but failed to document them in 'man
virsh'.  Also, I noticed some inconsistent use of commas.

* tools/virsh.pod (domstats): Tweak commas, add missing stats.
Signed-off-by: NEric Blake <eblake@redhat.com>

Commit 2aa167ca tried to fix the DBus interaction code to allow
callers to use native types instead of 4-byte bools.  But in
fixing the issue, I missed the case of an arrayref; Conrad Meyer
shows the following valid complaint issued by clang:

  CC       util/libvirt_util_la-virdbus.lo
util/virdbus.c:956:13: error: cast from 'bool *' to 'dbus_bool_t *' (aka 'unsigned int *') increases required alignment from 1 to 4 [-Werror,-Wcast-align]
            GET_NEXT_VAL(dbus_bool_t, bool_val, bool, "%d");
            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/virdbus.c:858:17: note: expanded from macro 'GET_NEXT_VAL'
            x = (dbustype *)(*xptrptr + (*narrayptr - 1));              \
                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 error generated.

But fixing that points out that we have NEVER supported arrayrefs
of sub-int types (byte, i16, u16, and now bool).  Again, while raw
types promote, arrays do not; so the macros HAVE to deal with both
size possibilities rather than assuming that an arrayref uses the
same sizing as the promoted raw type.

Obviously, our testsuite wasn't covering as much as it should have.

* src/util/virdbus.c (GET_NEXT_VAL): Also fix array cases.
(SET_NEXT_VAL): Fix uses of sub-int arrays.
* tests/virdbustest.c (testMessageArray, testMessageArrayRef):
Test it.
Signed-off-by: NEric Blake <eblake@redhat.com>

Commit 6fcddfcd refactored job statistics but missed the jobinfo type updated
in qemuDomainGetJobInfo. After this patch, we can use virDomainGetJobInfo to
get jobinfo type again.
Signed-off-by: NWang Rui <moon.wangrui@huawei.com>
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Commit 'c264eeaa' didn't do the prerequisite 'make syntax-check' before
pushing. There was a <tab> in the whitespace for the comment.  Replaced
with spaces and aligned.

pushed as build breaker since Jenkins complained loudly

The typical case where we had a problem is with such a filesystem
definition as created by virt-sandbox-service:

    <filesystem type='bind' accessmode='passthrough'>
      <source dir='/var/lib/libvirt/filesystems/mysshd/var'/>
      <target dir='/var'/>
    </filesystem>

In this case, we don't want to unmount the /var subtree or we may
loose the access to the source folder.

Resolving symlinks can fail before mounting any file system if one file
system depends on another being mounted. Symlinks are now resolved in
two passes:

  * Before any file system is mounted, but then we are more gentle if
    the source path can't be accessed
  * Right before mounting a file system, so that we are sure that we
    have the resolved path... but then if it can't be accessed we raise
    an error.

Due to a change (or bug?) in ip link implementation, the command
    'ip link add vnet0...'
is forced into
    'ip link add name vnet0...'
The changed command also works on older versions of iproute2, just the
'name' parameter has been made mandatory.

To get virt-sandbox-service working with AppArmor, virt-aa-helper
needs not to choke on path in /etc/libvirt-sandbox/services.

This turns out to be working by magic but needs to be fixed.

Add attribute to set vgamem_mb parameter of QXL device for QEMU. This
value sets the size of VGA framebuffer for QXL device. Default value in
QEMU is 8MB so reuse it also in libvirt to not break things.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

So far we didn't have any option to set video memory size for qemu video
devices. There was only the vram (ram for QXL) attribute but it was valid
only for the QXL video device.

To provide this feature to users QEMU has a dedicated device attribute
called 'vgamem_mb' to set the video memory size. We will use the 'vram'
attribute for setting video memory size for other QEMU video devices.

For the cirrus device we will ignore the vram value because it has
hardcoded video size in QEMU.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Allow setting vgamem size for video devices.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

QEMU has two different type of QXL display device. The first "qxl-vga"
is for primary video device and second "qxl" is for secondary video
device.

There are also two different ways how to specify those devices on qemu
command line, the first one and obsolete is using "-vga" option and the
current new one is using "-device" option. The "-vga" could be used only
to setup primary video device, so the "-vga qxl" equal to
"-device qxl-vga". Unfortunately the "-vga qxl" doesn't support setting
additional parameters for the device and "-global" option must be used
for this purpose. It's mandatory to use "-global qxl-vga...." to set the
parameters of primary video device previously defined with "-vga qxl".

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

The vram attribute was introduced to set the video memory but it is
usable only for few hypervisors excluding QEMU/KVM and the old XEN
driver. Only in case of QEMU the vram was used for QXL.

This patch updates the documentation to reflect current code in libvirt
and also changes the cases when we will set the default vram attribute.
It also fixes existing strange default value for VGA devices 9MB to 16MB
because the video ram should be rounded to power of two.

The change of default value could affect migrations but I found out that
QEMU always round the video ram to power of two internally so it's safe
to change the default value to the next closest power of two and also
silently correct every domain XML definition. And it's also safe because
we don't pass the value to QEMU.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

There are two special cases, if the input number is 0 or the number is
larger then 2^31 (for 32bit unsigned int). For the special cases the
return value is 0 because they cannot be rounded.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

s/rereshed/refreshed
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>

Add a "domfsinfo" command that shows a list of filesystems info mounted in
the guest. For example:

virsh # domfsinfo vm1
Mountpoint                           Name     Type     Target
-------------------------------------------------------------------
/                                    sda1     ext4     hdc
/opt                                 dm-2     vfat     vda,vdb
/mnt/test                            sdb1     xfs      sda
Signed-off-by: NTomoki Sekiyama <tomoki.sekiyama@hds.com>

Add test cases for qemuAgentGetFSInfo, with a sample agent response for
the qemu-get-fsinfo command and a configuration xml.
Signed-off-by: NTomoki Sekiyama <tomoki.sekiyama@hds.com>

Get mounted filesystems list, which contains hardware info of disks and its
controllers, from QEMU guest agent 2.2+. Then, convert the hardware info
to corresponding device aliases for the disks.
Signed-off-by: NTomoki Sekiyama <tomoki.sekiyama@hds.com>

Add daemon and driver code to (de-)serialize virDomainFSInfo.
Signed-off-by: NTomoki Sekiyama <tomoki.sekiyama@hds.com>

virDomainGetFSInfo returns a list of filesystems information mounted in the
guest, which contains mountpoints, device names, filesystem types, and
device aliases named by libvirt. This will be useful, for example, to
specify mountpoints to fsfreeze when taking snapshot of a part of disks.
Signed-off-by: NTomoki Sekiyama <tomoki.sekiyama@hds.com>

Add code to emit the event on change of the channel state and reconnect
to the qemu process.

Add code to support the event in the object-event example.

As qemu is now able to notify us about change of the channel state used
for communication with the guest agent we now can more precisely track
the state of the guest agent.

To allow notifying management apps this patch implements a new event
that will be triggered on changes of the guest agent state.

With this change, any patch declared in libvirt.spec with Patch[0-9]* is
automatically applied in %prep. Unlike with the standard %patch[0-9]*,
patches are applied with "git am" to avoid some unexpected results.
However, as a result of this, all patches must be in the right format
for "git am" to be able to apply them; they should ideally be generated
from git using "git format-patch".
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Use data provided by "query-chardev" to refresh the guest frontend state
of virtio channels.