QEMU 0.13 introduced cache=unsafe for -drive, this patch exposes
it in the libvirt layer.

  * Introduced a new QEMU capability flag ($prefix_CACHE_UNSAFE),
    as even if $prefix_CACHE_V2 is set, we can't know if unsafe
    is supported.

  * Improved the reliability of qemu cache type detection.

  * qemuhelptest prints test case name on failure.

The commit that prevents disk corruption on domain shutdown
(96fc4784) causes regression with QEMU
0.14.* and 0.15.* because of a regression bug in QEMU that was fixed
only recently in QEMU git. The affected versions of QEMU do not quit on
SIGTERM if started with -no-shutdown, which we use to implement fake
reboot. Since -no-shutdown tells QEMU not to quit automatically on guest
shutdown, domains started using the affected QEMU cannot be shutdown
properly and stay in a paused state.

This patch disables fake reboot feature on such QEMU by not using
-no-shutdown, which makes shutdown work as expected. However,
virDomainReboot will not work in this case and it will report "Requested
operation is not valid: Reboot is not supported with this QEMU binary".

domain parsing and serialization code, qemu driver backend and
a couple of test

For virtio disks and interfaces, qemu allows users to enable or disable
ioeventfd feature. This means, qemu can execute domain code, while
another thread waits for I/O event. Basically, in some cases it is win,
in some loss. This feature is available via 'ioeventfd' attribute in disk
and interface <driver> element. It accepts 'on' and 'off'. Leaving this
attribute out defaults to hypervisor decision.

qemu supports multi function PCI device at least version 0.13.0.

NB: the enum that uses the string vnet-host (now changed to vhost-net)
is used in XML, but fortunately that hasn't been in an official
release yet, so it can still be fixed.

Make virtTestLoadFile allocate the buffer to read the file into.

Fix logic error in virtTestLoadFile, stop reading on the first empty line.

Use virFileReadLimFD in virtTestCaptureProgramOutput to avoid manual
buffer handling.

A few of the tests were missing basic sanity checks, while most
of them were doing copy-and-paste initialization (in fact, some
of them pasted the argc > 1 check more than once!).  It's much
nicer to do things in one common place, and minimizes the size of
the next patch that fixes getcwd usage.

* tests/testutils.h (EXIT_AM_HARDFAIL): New define.
(progname, abs_srcdir): Define for all tests.
(VIRT_TEST_MAIN): Change callback signature.
* tests/testutils.c (virtTestMain): Do more common init.
* tests/commandtest.c (mymain): Simplify.
* tests/cputest.c (mymain): Likewise.
* tests/esxutilstest.c (mymain): Likewise.
* tests/eventtest.c (mymain): Likewise.
* tests/hashtest.c (mymain): Likewise.
* tests/networkxml2xmltest.c (mymain): Likewise.
* tests/nodedevxml2xmltest.c (myname): Likewise.
* tests/nodeinfotest.c (mymain): Likewise.
* tests/nwfilterxml2xmltest.c (mymain): Likewise.
* tests/qemuargv2xmltest.c (mymain): Likewise.
* tests/qemuhelptest.c (mymain): Likewise.
* tests/qemuxml2argvtest.c (mymain): Likewise.
* tests/qemuxml2xmltest.c (mymain): Likewise.
* tests/qparamtest.c (mymain): Likewise.
* tests/sexpr2xmltest.c (mymain): Likewise.
* tests/sockettest.c (mymain): Likewise.
* tests/statstest.c (mymain): Likewise.
* tests/storagepoolxml2xmltest.c (mymain): Likewise.
* tests/storagevolxml2xmltest.c (mymain): Likewise.
* tests/virbuftest.c (mymain): Likewise.
* tests/virshtest.c (mymain): Likewise.
* tests/vmx2xmltest.c (mymain): Likewise.
* tests/xencapstest.c (mymain): Likewise.
* tests/xmconfigtest.c (mymain): Likewise.
* tests/xml2sexprtest.c (mymain): Likewise.
* tests/xml2vmxtest.c (mymain): Likewise.

For qemu names the primary vga as "qxl-vga":

  1) if vram is specified for 2nd qxl device:

    -vga qxl -global qxl-vga.vram_size=$SIZE \
    -device qxl,id=video1,vram_size=$SIZE,...

  2) if vram is not specified for 2nd qxl device, (use the default
     set by global):

    -vga qxl -global qxl-vga.vram_size=$SIZE \
    -device qxl,id=video1,...

For qemu names all qxl devices as "qxl":

  1) if vram is specified for 2nd qxl device:

    -vga qxl -global qxl.vram_size=$SIZE \
    -device qxl,id=video1,vram_size=$SIZE ...

  2) if vram is not specified for 2nd qxl device:

    -vga qxl -global qxl-vga.vram_size=$SIZE \
    -device qxl,id=video1,...

"-global" is the only way to define vram_size for the primary qxl
device, regardless of how qemu names it, (It's not good a good
way, as original idea of "-global" is to set a global default for
a driver property, but to specify vram for first qxl device, we
have to use it).

For other qxl devices, as they are represented by "-device", could
specify it directly and seperately for each, and it overrides the
default set by "-global" if specified.

v1 - v2:
  * modify "virDomainVideoDefaultRAM" so that it returns 16M as the
    default vram_size for qxl device.

  * vram_size * 1024 (qemu accepts bytes for vram_size).

  * apply default vram_size for qxl device for which vram_size is
    not specified.

  * modify "graphics-spice" tests (more sensiable vram_size)

  * Add an argument of virDomainDefPtr type for qemuBuildVideoDevStr,
    to use virDomainVideoDefaultRAM in qemuBuildVideoDevStr).

v2 - v3:
  * Modify default video memory size for qxl device from 16M to 24M

  * Update codes to be consistent with changes on qemu_capabilities.*

This is done for two reasons:
- we are getting very close to 64 flags which is the maximum we can use
  with unsigned long long
- by using LL constants in enum we already violates C99 constraint that
  enum values have to fit into int

Three new functions (qemuCapsSet, qemuCapsClear, and qemuCapsGet) were
introduced replacing direct bit operations.

The new names comply more with the fact that they are all members of
enum qemuCapsFlags.

This is in response to:

   https://bugzilla.redhat.com/show_bug.cgi?id=629662

Explanation

qemu's virtio-net-pci driver allows setting the algorithm used for tx
packets to either "bh" or "timer". This is done by adding ",tx=bh" or
",tx=timer" to the "-device virtio-net-pci" commandline option.

'bh' stands for 'bottom half'; when this is set, packet tx is all done
in an iothread in the bottom half of the driver. (In libvirt, this
option is called the more descriptive "iothread".)

'timer' means that tx work is done in qemu, and if there is more tx
data than can be sent at the present time, a timer is set before qemu
moves on to do other things; when the timer fires, another attempt is
made to send more data. (libvirt retains the name "timer" for this
option.)

The resulting difference, according to the qemu developer who added
the option is:

    bh makes tx more asynchronous and reduces latency, but potentially
    causes more processor bandwidth contention since the cpu doing the
    tx isn't necessarily the cpu where the guest generated the
    packets.

Solution

This patch provides a libvirt domain xml knob to change the option on
the qemu commandline, by adding a new attribute "txmode" to the
<driver> element that can be placed inside any <interface> element in
a domain definition. It's use would be something like this:

    <interface ...>
      ...
      <model type='virtio'/>
      <driver txmode='iothread'/>
      ...
    </interface>

I chose to put this setting as an attribute to <driver> rather than as
a sub-element to <tune> because it is specific to the virtio-net
driver, not something that is generally usable by all network drivers.
(note that this is the same placement as the "driver name=..."
attribute used to choose kernel vs. userland backend for the
virtio-net driver.)

Actually adding the tx=xxx option to the qemu commandline is only done
if the version of qemu being used advertises it in the output of

    qemu -device virtio-net-pci,?

If a particular txmode is requested in the XML, and the option isn't
listed in that help output, an UNSUPPORTED_CONFIG error is logged, and
the domain fails to start.

qemu 0.13.0 (at least as built for Fedora 14, and also backported to
RHEL 6.0 qemu) supported an older syntax for a spicevmc channel; it's
not as flexible (it has an implicit name and hides the chardev
aspect), but now that we support spicevmc, we might as well target
both variants.

* src/qemu/qemu_capabilities.h (QEMUD_CMD_FLAG_DEVICE_SPICEVMC):
New flag.
* src/qemu/qemu_capabilities.c (qemuCapsParseDeviceStr): Set it
correctly.
* src/qemu/qemu_command.h (qemuBuildVirtioSerialPortDevStr): Drop
declaration.
* src/qemu/qemu_command.c (qemuBuildVirtioSerialPortDevStr): Alter
signature, check flag.
(qemuBuildCommandLine): Adjust caller and check flag.
* tests/qemuhelptest.c (mymain): Update test.
* tests/qemuxml2argvtest.c (mymain): New test.
* tests/qemuxml2argvdata/qemuxml2argv-channel-spicevmc-old.xml:
New file.
* tests/qemuxml2argvdata/qemuxml2argv-channel-spicevmc-old.args:
Likewise.

Qemu smartcard/spicevmc support exists on branches (such as
http://cgit.freedesktop.org/~alon/qemu/commit/?h=usb_ccid.v15&id=024a37b)
but is not yet upstream.  The added -help output matches a scratch build
that will be close to the RHEL 6.1 qemu-kvm.

* src/qemu/qemu_capabilities.h (QEMUD_CMD_FLAG_CCID_EMULATED)
(QEMUD_CMD_FLAG_CCID_PASSTHRU, QEMUD_CMD_FLAG_CHARDEV_SPICEVMC):
New flags.
* src/qemu/qemu_capabilities.c (qemuCapsComputeCmdFlags)
(qemuCapsParseDeviceStr): Check for smartcard capabilities.
(qemuCapsExtractVersionInfo): Tweak comment.
* tests/qemuhelptest.c (mymain): New test.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel61: New file.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel61-device: Likewise.

Signed-off-by: NEric Blake <eblake@redhat.com>

* src/qemu/qemu_capabilities.h (qemuCapsParseDeviceStr): New
prototype.
* src/qemu/qemu_capabilities.c (qemuCapsParsePCIDeviceStrs)
Rename and split...
(qemuCapsExtractDeviceStr, qemuCapsParseDeviceStr): ...to make it
easier to add and test device-specific checks.
(qemuCapsExtractVersionInfo): Update caller.
* tests/qemuhelptest.c (testHelpStrParsing): Also test parsing of
device-related flags.
(mymain): Update expected flags.
* tests/qemuhelpdata/qemu-0.12.1-device: New file.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel60-device: New file.
* tests/qemuhelpdata/qemu-kvm-0.12.3-device: New file.
* tests/qemuhelpdata/qemu-kvm-0.13.0-device: New file.

* src/qemu/qemu_capabilities.h (QEMUD_CMD_FLAG_MIGRATE_QEMU_FD):
New enum value.
* src/qemu/qemu_capabilities.c (qemuCapsComputeCmdFlags): Populate
flags according to qemu version.
* tests/qemuhelptest.c (mymain): Adjust test.

* qemuargv2xmltest.c, qemuhelptest.c,
  qemuxml2argvtest.c, testutilsqemu.c: Update includes and
  cope with API renames

* tests/qemuhelpdata/qemu-kvm-0.13.0: New file.
* tests/qemuhelptest.c (mymain): New test from Fedora 14 qemu-kvm,
which covers some options (like -fstype passthrough) not tested elsewhere.

* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel60: New file.
* tests/qemuhelptest.c (mymain): New test from RHEL 6.0 qemu-kvm,
which covers some options (like -vga=qxl) not tested elsewhere.
* .x-sc_prohibit_empty_lines_at_EOF: Exempt qemu help output.

Commit febc5916 introduced -vga none in
case no video card is included in domain XML. However, old qemu
versions do not support this and such domain cannot be successfully
started.

* docs/schemas/domain.rng: Fix merge error which left SPICE channel
  elements under VNC schema.
* tests/qemuhelptest.c: Add SPICE flag to kvm-83 test
* tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.xml: Add
  <memballoon> element

The patch is based on the possiblity in the QEmu command line to
add -smbios options allowing to override the default values picked
by QEmu. We need to detect this first from QEmu help output.
If the domain is defined with smbios to be inherited from host
then we pass the values coming from the Host own SMBIOS, but
if the domain is defined with smbios to come from sysinfo, we
use the ones coming from the domain definition.

* src/qemu/qemu_conf.h: add the QEMUD_CMD_FLAG_SMBIOS_TYPE enum
  value
* src/qemu/qemu_conf.c: scan the help output for the smbios support,
  and if available add support based on the domain definitions,
  and host data
* tests/qemuhelptest.c: add the new enum in the outputs

So far, readonly=on option is used when qemu supports -device. However,
there are qemu versions which support readonly option with -drive
although they don't have support for -device.

This sets the process name to the same value as the Windows title,
but since the name is limited to 16 chars only this is kept as a
configuration option and turned off by default
* src/qemu/qemu.conf src/qemu/qemu_conf.[ch]: hceck for support in the
  QEmu help output, add the option in qemu conf file and augment
  qemudBuildCommandLine to add it if switched on
* src/qemu/libvirtd_qemu.aug src/qemu/test_libvirtd_qemu.aug: augment
  the augeas lenses accordingly
* tests/qemuhelptest.c: cope with the extra flag being detected now

This enables support for nested SVM using the regular CPU
model/features block. If the CPU model or features include
'svm', then the '-enable-nesting' flag will be added to the
QEMU command line. Latest out of tree patches for nested
'vmx', no longer require the '-enable-nesting' flag. They
instead just look at the cpu features. Several of the models
already include svm support, but QEMU was just masking out
the svm bit silently. So this will enable SVM on such
models

* src/qemu/qemu_conf.h: flag for -enable-nesting
* src/qemu/qemu_conf.c: Use -enable-nesting if VMX or SVM are in
  the CPUID
* src/cpu/cpu.h, src/cpu/cpu.c: API to check for a named feature
* src/cpu/cpu_x86.c: x86 impl of feature check
* src/libvirt_private.syms: Add cpuHasFeature
* src/qemuhelptest.c: Add nesting flag where required

Add a new element to the <os> block:

  <bootmenu enable="yes|no"/>

Which maps to -boot,menu=on|off on the QEMU command line.

I decided to use an explicit 'enable' attribute rather than just make the
bootmenu element boolean. This allows us to treat lack of a bootmenu element
as 'use hypervisor default'.

(gdb) p/x QEMUD_CMD_FLAG_VNET_HOST
$7 = 0xffffffff80000000

Oops - that meant we were incorrectly setting QEMU_CMD_FLAG_RTC_TD_HACK
for qemu-kvm-0.12.3 (and probably botching a few other settings as well).

Fixes Red Hat BZ#592070

* src/qemu/qemu_conf.h (QEMUD_CMD_FLAG_VNET_HOST): Avoid sign
extension.
* tests/qemuhelpdata/qemu-kvm-0.12.3: New file.
* tests/qemuhelptest.c (mymain): Add another case.

* src/qemu/qemu_conf.h: define 4 new flags
* src/qemu/qemu_conf.c: check the help text of qemu for presence of
                        features indicated by each flag.
* tests/qemuhelptest.c: add appropriate flags into the masks for each test

* global: patch created by running:
for f in $(git ls-files '*.[ch]') ; do
    cppi $f > $f.t && mv $f.t $f
done

This allows QEMU guests to be started with an arbitrary clock
offset

The test case can't actually be enabled, since QEMU argv expects
an absolute timestring, and this will obviously change every
time the test runs :-( Hopefully QEMU will allow a relative
time offset in the future.

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Use the -rtc arg
  if available to support variable clock offset mode
* tests/qemuhelptest.c: Add QEMUD_CMD_FLAG_RTC for qemu 0.12.1
* qemuxml2argvdata/qemuxml2argv-clock-variable.args,
  qemuxml2argvdata/qemuxml2argv-clock-variable.xml,
  qemuxml2argvtest.c: Test case, except we can't actually enable
  it yet.

The QEMU flags are commonly stored as a signed or unsigned int,
allowing only 31 flags. This limit is rather close, so to aid
future patches, change it to a 64-bit int

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c,
  tests/qemuargv2xmltest.c, tests/qemuhelptest.c, tests/qemuxml2argvtest.c:
  Use 'unsigned long long' for QEMU flags

QEMU's command line equivalent for the following domain XML fragment
    <vcpus>2</vcpus>
    <cpu ...>
        ...
        <topology sockets='1' cores='2', threads='1'/>
    </cpu>

is

    -smp 2,sockets=1,cores=2,threads=1

This syntax was introduced in QEMU-0.12.

Version 2 changes:
- -smp argument build split into a separate function
- always add ",sockets=S,cores=C,threads=T" to -smp if qemu supports it
- use qemuParseCommandLineKeywords for command line parsing

Version 3 changes:
- ADD_ARG_LIT => ADD_ARG and line reordering in qemudBuildCommandLine
- rebased
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Not all QEMU builds default to SDL graphics for their display.
Newer QEMU now has an explicit -sdl flag, which we can use to
explicitly request SDL intead of relying on the default. This
protects libvirt against unexpected changes in graphics default

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Probe for -sdl
  flag and use it if it is found
* tests/qemuhelptest.c: Add SDL flag to tests

Probe for the new -device flag and if available set the -nodefaults
flag, instead of using -net none, -serial none or -parallel none.
Other device types will be converted to use -device in later patches.
The -nodefaults flag will help avoid unwelcome surprises from future
QEMU releases

* src/qemu/qemu_conf.c: Probe for -device. Add -nodefaults flag.
  Remove -net none, -serial none or -parallel none
* src/qemu/qemu_conf.h: Define QEMU_CMD_FLAG_DEVICE
* tests/qemuhelpdata/qemu-0.12.1: New data file for 0.12.1 QEMU
* tests/qemuhelptest.c: Test feature extraction from 0.12.1 QEMU