- 21 2月, 2017 1 次提交
-
-
由 Peter Krempa 提交于
Add APIs that allow to dynamically register driver backends so that the list of available drivers does not need to be known during compile time. This will allow us to modularize the storage driver on runtime.
-
- 21 9月, 2012 1 次提交
-
-
由 Eric Blake 提交于
https://www.gnu.org/licenses/gpl-howto.html recommends that the 'If not, see <url>.' phrase be a separate sentence. * tests/securityselinuxhelper.c: Remove doubled line. * tests/securityselinuxtest.c: Likewise. * globally: s/; If/. If/
-
- 23 7月, 2012 1 次提交
-
-
由 Osier Yang 提交于
Per the FSF address could be changed from time to time, and GNU recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html) You should have received a copy of the GNU General Public License along with Foobar. If not, see <http://www.gnu.org/licenses/>. This patch removes the explicit FSF address, and uses above instead (of course, with inserting 'Lesser' before 'General'). Except a bunch of files for security driver, all others are changed automatically, the copyright for securify files are not complete, that's why to do it manually: src/security/security_selinux.h src/security/security_driver.h src/security/security_selinux.c src/security/security_apparmor.h src/security/security_apparmor.c src/security/security_driver.c
-
- 22 5月, 2012 1 次提交
-
-
由 Wido den Hollander 提交于
This patch adds support for a new storage backend with RBD support. RBD is the RADOS Block Device and is part of the Ceph distributed storage system. It comes in two flavours: Qemu-RBD and Kernel RBD, this storage backend only supports Qemu-RBD, thus limiting the use of this storage driver to Qemu only. To function this backend relies on librbd and librados being present on the local system. The backend also supports Cephx authentication for safe authentication with the Ceph cluster. For storing credentials it uses the built-in secret mechanism of libvirt. Signed-off-by: NWido den Hollander <wido@widodh.nl>
-
- 10 3月, 2010 1 次提交
-
-
由 Eric Blake 提交于
* global: patch created by running: for f in $(git ls-files '*.[ch]') ; do cppi $f > $f.t && mv $f.t $f done
-
- 21 9月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
* daemon/qemud.c, src/Makefile.am: Adapt for changed paths * src/storage*.c, src/storage/*.h, src/parthelpre.c: Move to src/storage/
-
- 08 9月, 2009 1 次提交
-
-
由 Dave Allan 提交于
* configure.in src/Makefile.am src/storage_backend.[ch] src/storage_conf.[ch] src/storage_backend_mpath.[ch] po/POTFILES.in: add a new module for storage multipath, it requires device-mapper
-
- 11 4月, 2008 1 次提交
-
-
由 Jim Meyering 提交于
Done with these commands: git grep -l Local.variab|xargs \ perl -0x3b -pi -e 's,\n+/\*\n \* vim:(.|\n)*,\n,' git grep -l Local.variab|xargs \ perl -0x3b -pi -e 's,\n+/\*\n \* Local variables:\n(.|\n)*,\n,'
-
- 20 2月, 2008 4 次提交
-
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
- 30 1月, 2008 1 次提交
-
-
由 Jim Meyering 提交于
Use <config.h>, not "config.h", per autoconf documentation. * Makefile.cfg (local-checks-to-skip) [sc_require_config_h]: Enable. * .x-sc_require_config_h: New file, to list exempted files. * Makefile.am (EXTRA_DIST): Add .x-sc_require_config_h.
-
- 26 11月, 2007 1 次提交
-
-
由 Richard W.M. Jones 提交于
* src/bridge.c, src/bridge.h, src/qemu_conf.c, src/qemu_conf.h, src/qemu_driver.c, src/qemu_driver.h, src/test.c: Disable more of qemu if configured --without-qemu.
-
- 29 6月, 2007 1 次提交
-
-
由 Daniel Veillard 提交于
stylesheet * docs/*: regenerated * src/bridge.c src/bridge.h src/buf.c src/iptables.c src/libvirt.c src/qemu_driver.c src/qemu_driver.h src/uuid.c src/uuid.h: cleanup, addd comments, made functions static and fixe a few bugs Daniel
-
- 27 6月, 2007 10 次提交
-
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
- 16 3月, 2007 1 次提交
-
-
由 Daniel Veillard 提交于
src/sexpr.h src/test.c src/xm_internal.c src/xml.c src/xml.h: applied patch from Richard Jones adding check to printf-like functions and fixing the problems raised Daniel
-
- 23 2月, 2007 2 次提交
-
-
由 Mark McLoughlin 提交于
* qemud/protocol.h: add the (domain/network)(Get/Set)Autostart requests and replies to the protocol. * src/qemu_internal.c: hookup the qemu driver autostart methods * qemud/dispatch.c, qemud/driver.[ch], internal.h: add the daemon side, but just set an in-memory autostart flag for now.
-
由 Mark McLoughlin 提交于
* qemud/driver.[ch], qemud/dispatch.c: fix the fact that qemudDispatchDomainStart() doesn't report an error if the uuid lookup fails and also move the uuid lookup into the driver so that it matches the way we do Destroy().
-
- 15 2月, 2007 1 次提交
-
-
由 Mark McLoughlin 提交于
* include/libvirt/libvirt.h.in, src/libvirt.c: add virNetworkGetBridgeName() to allow finding out what bridge to connect to in order to join a network. * src/driver.h: add networkGetBridgeName() to vtable. * qemud/protocol.h: add the request and reply to the qemud protocol. * qemud/dispatch.c, qemud/driver.[ch]: handle them here. * src/qemu_internal.c: implement GetBridgeName() in the qemu driver. * src/libvirt_sym.version: add new symbol.
-
- 14 2月, 2007 2 次提交
-
-
由 Mark McLoughlin 提交于
* qemud/protocol.h: add the protocol for virtual networks * qemud/dispatch.c: implement the protocol * qemud/driver.[ch]: add stubs for the driver * qemud/internal.h: add struct qemud_network * src/qemu_internal.c: add a virtual networks driver
-
由 Daniel P. Berrange 提交于
-