It make no sense at all to have it there.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>

Output error when we try to set a too large max_sectors.
Just like queues and cmd_per_lun here.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>

It make no sense at all to have it there.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1171582

When we edit a negative controller address number to a device,
some of them will auto generate a controller with invalid index
number. This will make guest disappear after restart libvirtd.
Instead of allowing negative number for controller index, we
should forbid negative number in these place (we did this before,
but after f18c02ec, virStrToLong_ui changed to allow negative
number). Therefore switch to virStrToLong_uip in these places.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

At the time that the network driver allocates a connection to a
network, the tap device that will be used hasn't yet been created -
that will be done later by qemu (or lxc or whoever) - but if the
network has macTableManager='libvirt', then when we do get around to
creating the tap device, we will need to add an entry for it to the
network bridge's fdb (forwarding database) *and* turn off learning and
unicast_flood for that tap device in the bridge's sysfs settings. This
means that qemu needs to know both the bridge name as well as the
setting of macTableManager, so we either need to create a new API to
retrieve that info, or just pass it back in the ActualNetDef that is
created during networkAllocateActualDevice. We choose the latter
method, since it's already done for the bridge device, and it has the
side effect of making the information available in domain status.

(NB: in the future, I think that the tap device should actually be
created by networkAllocateActualDevice(), as that will solve several
other problems, but that is a battle for another day, and this
information will still be useful outside the network driver)

When the actualType of a virDomainNetDef is "network", it means that
we are connecting to a libvirt-managed network (routed, natted, or
isolated) which does use a bridge device (created by libvirt). In the
past we have required drivers such as qemu to call the public API to
retrieve the bridge name in this case (even though it is available in
the NetDef's ActualNetDef if the actualType is "bridge" (i.e., an
externally-created bridge that isn't managed by libvirt). There is no
real reason for this difference, and as a matter of fact it
complicates things for qemu. Also, there is another bridge-related
attribute (macTableManager) that will need to be available in both
cases, so this makes things consistent.

In order to avoid problems when restarting libvirtd after an update
from an older version that *doesn't* store the network's bridgename in
the ActualNetDef, we also need to put it in place during
networkNotifyActualDevice() (this function is run for each interface
of each domain whenever libvirtd is restarted).

Along with making the bridge name available in the internal object, it
is also now reported in the <source> element of the <interface> state
XML (or the <actual> subelement in the internally-stored format).

The one oddity about this change is that usually there is a separate
union for every different "type" in a higher level object (e.g. in the
case of a virDomainNetDef there are separate "network" and "bridge"
members of the union that pivots on the type), but in this case
network and bridge types both have exactly the same attributes, so the
"bridge" member is used for both type==network and type==bridge.

Signed-off-by: NWang Rui <moon.wangrui@huawei.com>

Commit id '0d36a5d0' modified the code slightly, but removed the
return value check thus causing Coverity to complain that this call
was the only one where the return value wasn't checked. Since nothing
was done previously if there was a failure, just use ignore_value here
to pacify Coverity

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1169183Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1169183Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Add attribute to set vgamem_mb parameter of QXL device for QEMU. This
value sets the size of VGA framebuffer for QXL device. Default value in
QEMU is 8MB so reuse it also in libvirt to not break things.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

The vram attribute was introduced to set the video memory but it is
usable only for few hypervisors excluding QEMU/KVM and the old XEN
driver. Only in case of QEMU the vram was used for QXL.

This patch updates the documentation to reflect current code in libvirt
and also changes the cases when we will set the default vram attribute.
It also fixes existing strange default value for VGA devices 9MB to 16MB
because the video ram should be rounded to power of two.

The change of default value could affect migrations but I found out that
QEMU always round the video ram to power of two internally so it's safe
to change the default value to the next closest power of two and also
silently correct every domain XML definition. And it's also safe because
we don't pass the value to QEMU.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Get mounted filesystems list, which contains hardware info of disks and its
controllers, from QEMU guest agent 2.2+. Then, convert the hardware info
to corresponding device aliases for the disks.
Signed-off-by: NTomoki Sekiyama <tomoki.sekiyama@hds.com>

To be able to express some use cases of the RBD backing with libvirt, we
need to be able to specify a config file for the RBD client to qemu as
that is one of the commonly used options.

Some storage systems have internal support for snapshots. Libvirt should
be able to select a correct snapshot when starting a VM.

This patch adds a XML element to select a storage source snapshot for
the RBD protocol which supports this feature.

To track state of virtio channels this patch adds a new output-only
attribute called 'state' to the <target> element of virtio channels.

This will be later populated with the guest state of the channel.

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

virDomainChrSourceDefIsEqual should return 'true' for
identical SPICEVMC chardevs, and those that have no source
specification.

After this change, a failed hotplug no longer leaves a stale
pointer in the domain definition.

https://bugzilla.redhat.com/show_bug.cgi?id=1162097

Modify the structure _virDomainBlockIoTuneInfo to support these the new
options.
Change the initialization of the variable expectedInfo in qemumonitorjsontest.c
to avoid compiling problem.
Add documentation about the new xml options
Signed-off-by: NMatthias Gatto <matthias.gatto@outscale.com>

Commit 01b4de2b abstracts virDomainParseMemory()
for use by other functions in domain_conf.c
Extend the same for use, for functions outside of this file.
Signed-off-by: NPrerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

As reviewing patches upstream it occurred to me, that we have two
functions doing nearly the same: virDomainParseMemory which
expects XML in the following format:

  <memory unit='MiB'>1337</memory>

The other function being virDomainHugepagesParseXML expecting the
following format:

  <someElement size='1337' unit='MiB'/>

It wouldn't matter to have two functions handle two different
scenarios like this if we could only not copy code that handles
32bit arches around. So this code merges the common parts into
one by inventing new @units_xpath argument to
virDomainParseMemory which allows overriding the default location
of @unit attribute in XML. With this change both scenarios above
can be parsed with virDomainParseMemory.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This adds support for PowerPC Little Endian architecture.,
and allows libvirt to spawn VMs based on 'ppc64le' architecture.
Signed-off-by: NPradipta Kr. Banerjee <bpradip@in.ibm.com>
Signed-off-by: NPrerna Saxena <prerna@linux.vnet.ibm.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Commit 6c9a8a49 (Oct 2014) exposed a long-standing issue on 32-bit
machines: code related to virDomainSetMemoryParameters has always
been documented as using a 64-bit limit, but it was implemented by
calling virDomainParseMemory which enforced an 'unsigned long'
limit.  Since VIR_DOMAIN_MEMORY_PARAM_UNLIMITED capped to a
long is -1, but virDomainParseScaledValue no longer accepts
negative values, an attempt to use 2^53-1 as a hard memory limit
started failing the testsuite.  However, the problem with capping
things artificially low has existed for much longer - ever since
commits 4888f0fb and 2e22f23b (Mar 2012) switched internal tracking
from 'unsigned long' to 'unsigned long long' (prior to that time,
the cap was a side-effect of the choice of types).  We _have_ to
cap the balloon memory values, (no thanks to baked in 'unsigned long'
of API such as virDomainSetMaxMemory or virDomainGetInfo with no
counterpart API that guarantees 64-bit access to those numbers)
but memory parameters have never needed the artificial limit.

At any rate, the solution is to make the parser function gain a
parameter, and only do the reduced 32-bit cap for the values that
are constrained due to API.

* src/conf/domain_conf.h (_virDomainMemtune): Add comments.
* src/conf/domain_conf.c (virDomainParseMemory): Add parameter.
(virDomainDefParseXML): Adjust callers.
Signed-off-by: NEric Blake <eblake@redhat.com>

It makes sense for none of the callers to have negative value as an
output and, fortunately, if anyone tried defining domain with negative
memory or any other value parsed by virDomainParseScaledValue(), the
resulting value was 0.  That means we can error out during parsing as
it won't break anything.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1155843Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

The <sysinfo> data block was indented by 2 spaces too many.
This was missed because we never had any test validating
the XML formatting.

The mode attribute is required for the source element of vhost-user.
Thus virDomainNetDefFormat should always generate a xml with it and not
only when the mode is server.

The commit fixes the issue. And it adds a vhostuser interface in
'client' mode to qemuxml2argv-net-vhostuser.(args|xml) to test this
usecase.
Signed-off-by: NMaxime Leroy <maxime.leroy@6wind.com>

Shove it to the top of the file so that it can be reused earlier.

As in the device info iterator add a switch that will force the compiler
to check that new device types are added to the ABI stability checker.

Although the device will probably inhibit migration add checks to make
sure that the configuration change gets caught.

Use typecasted switch statement and note the type used to select the
address type in a comment.

Signed-off-by: NWang Rui <moon.wangrui@huawei.com>

Allow the Xen drivers to determine default vram values.  Sane
default vaules depend on the device model being used, so the
drivers are in the best position to determine the defaults.

For the legacy xen driver, it is best to maintain the existing
logic for setting default vram values to ensure there are no
regressions.  The libxl driver currently does not support
configuring a video device.  Support will be added in a
subsequent patch, where the benefit of this change will be
reaped.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

This new attribute will control whether or not libvirt will pay
attention to guest notifications about changes to network device mac
addresses and receive filters. The default for this is 'no' (for
security reasons). If it is set to 'yes' *and* the specified device
model and connection support it (currently only macvtap+virtio) then
libvirt will watch for NIC_RX_FILTER_CHANGED events, and when it
receives one, it will issue a query-rx-filter command, retrieve the
result, and modify the host-side macvtap interface's mac address and
unicast/multicast filters accordingly.

The functionality behind this attribute will be in a later patch. This
patch merely adds the attribute to the top-level of a domain's
<interface> as well as to <network> and <portgroup>, and adds
documentation and schema/xml2xml tests. Rather than adding even more
test files, I've just added the net attribute in various applicable
places of existing test files.

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This patch implements support for the ivshmem device in QEMU.
Signed-off-by: NMaxime Leroy <maxime.leroy@6wind.com>
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This patch adds parsing/formatting code as well as documentation for
shared memory devices.  This will currently be only accessible in QEMU
using it's ivshmem device, but is designed as generic as possible to
allow future expansion for other hypervisors.

In the devices section in the domain XML users may specify:

- For shmem device using a server:

 <shmem name='shmem0'>
   <server path='/tmp/socket-ivshmem0'/>
   <size unit='M'>32</size>
   <msi vectors='32' ioeventfd='on'/>
 </shmem>

- For ivshmem device not using an ivshmem server:

 <shmem name='shmem1'>
   <size unit='M'>32</size>
 </shmem>

Most of the configuration is made optional so it also allows
specifications like:

 <shmem name='shmem1/>
 <shmem name='shmem2'>
   <server/>
 </shmem>
Signed-off-by: NMaxime Leroy <maxime.leroy@6wind.com>
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

If you use public api virConnectListAllDomains() with second parameter
set to NULL to get only the number of domains you will lock out all
other operations with domains.

Introduced by commit 2c680804.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Add options for tuning segment offloading:
<driver>
  <host csum='off' gso='off' tso4='off' tso6='off'
        ecn='off' ufo='off'/>
  <guest csum='off' tso4='off' tso6='off' ecn='off' ufo='off'/>
</driver>
which control the respective host_ and guest_ properties
of the virtio-net device.

If you have a bridge network in running domain and libvirtd is restarted
the information about host bridge interface is lost from live xml.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1140085Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>