Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

At the very beginning of the test we check if the underlying
filesystem supports extended attributes as they are used to store fake
SELinux labels. In order to check that, a dummy file is created and
semi-random attribute is set. However, the file is created under:

  abs_srcdir "/securityselinuxlabeldata/testxattr"

which has two problems: abs_srcdir is not required to be writable, so
it should have been abs_builddir. The second one is - there's no
"securityselinuxlabeldata" folder under abs_builddir. The problem was
introduced in caf164f1.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

libvirt unit test used setxattr with "user.libvirt.selinux" name to
emulate setfilecon of selinux. But for some old kernel filesystem
(like 2.6.32-431.el6.x86_64), if the filesystem is not mounted with
user_xattr flag, the setxattr with "user.libvirt.selinux" will fail.

So adding testUserXattrEnabled() in securityselinuxlabeltest.c,
if user_xattr is not enabled, skip this case.

The user_xattr is departed in newer kernel, therefore this commit is
only for the compatablity for old kernel.
Signed-off-by: NJincheng Miao <jmiao@redhat.com>
Signed-off-by: NEric Blake <eblake@redhat.com>
Tested-by: NScott Sullivan <ssullivan@liquidweb.com>

As part of the work on backing chains, I'm finding that it would
be easier to directly manipulate chains of pointers (adding a
snapshot merely adjusts pointers to form the correct list) rather
than copy data from one struct to another.  This patch converts
domain disk source to be a pointer.

In this patch, the pointer is ALWAYS allocated (thanks in part to
the previous patch forwarding all disk def allocation through a
common point), and all other changse are just mechanical fallout of
the new type; there should be no functional change.  It is possible
that we may want to leave the pointer NULL for a cdrom with no
medium in a later patch, but as that requires a closer audit of the
source to ensure we don't fault on a null dereference, I didn't do
it here.

* src/conf/domain_conf.h (_virDomainDiskDef): Change type of src.
* src/conf/domain_conf.c: Adjust all clients.
* src/security/security_selinux.c: Likewise.
* src/qemu/qemu_domain.c: Likewise.
* src/qemu/qemu_command.c: Likewise.
* src/qemu/qemu_conf.c: Likewise.
* src/qemu/qemu_process.c: Likewise.
* src/qemu/qemu_migration.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/lxc/lxc_driver.c: Likewise.
* src/lxc/lxc_controller.c: Likewise.
* tests/securityselinuxlabeltest.c: Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

A continuation of the migration of disk details to virstoragefile.
This patch moves a single enum, but converting the name has quite
a bit of fallout.

* src/conf/domain_conf.h (virDomainDiskType): Move...
* src/util/virstoragefile.h (virStorageType): ...and rename.
* src/bhyve/bhyve_command.c (bhyveBuildDiskArgStr)
(virBhyveProcessBuildLoadCmd): Update clients.
* src/conf/domain_conf.c (virDomainDiskSourceDefParse)
(virDomainDiskDefParseXML, virDomainDiskSourceDefFormatInternal)
(virDomainDiskDefFormat, virDomainDiskGetActualType)
(virDomainDiskDefForeachPath, virDomainDiskSourceIsBlockType):
Likewise.
* src/conf/snapshot_conf.h (_virDomainSnapshotDiskDef): Likewise.
* src/conf/snapshot_conf.c (virDomainSnapshotDiskDefParseXML)
(virDomainSnapshotAlignDisks, virDomainSnapshotDiskDefFormat):
Likewise.
* src/esx/esx_driver.c (esxAutodetectSCSIControllerModel)
(esxDomainDefineXML): Likewise.
* src/locking/domain_lock.c (virDomainLockManagerAddDisk):
Likewise.
* src/lxc/lxc_controller.c
(virLXCControllerSetupLoopDeviceDisk)
(virLXCControllerSetupNBDDeviceDisk)
(virLXCControllerSetupLoopDevices, virLXCControllerSetupDisk):
Likewise.
* src/parallels/parallels_driver.c (parallelsGetHddInfo):
Likewise.
* src/phyp/phyp_driver.c (phypDiskType): Likewise.
* src/qemu/qemu_command.c (qemuGetDriveSourceString)
(qemuDomainDiskGetSourceString, qemuBuildDriveStr)
(qemuBuildCommandLine, qemuParseCommandLineDisk)
(qemuParseCommandLine): Likewise.
* src/qemu/qemu_conf.c (qemuCheckSharedDevice)
(qemuTranslateDiskSourcePool)
(qemuTranslateSnapshotDiskSourcePool): Likewise.
* src/qemu/qemu_domain.c (qemuDomainDeviceDefPostParse)
(qemuDomainDetermineDiskChain): Likewise.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo)
(qemuDomainSnapshotPrepareDiskExternalBackingInactive)
(qemuDomainSnapshotPrepareDiskExternalBackingActive)
(qemuDomainSnapshotPrepareDiskExternalOverlayActive)
(qemuDomainSnapshotPrepareDiskExternalOverlayInactive)
(qemuDomainSnapshotPrepareDiskInternal)
(qemuDomainSnapshotPrepare)
(qemuDomainSnapshotCreateSingleDiskActive): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainChangeEjectableMedia):
Likewise.
* src/qemu/qemu_migration.c (qemuMigrationIsSafe): Likewise.
* src/security/security_apparmor.c
(AppArmorRestoreSecurityImageLabel)
(AppArmorSetSecurityImageLabel): Likewise.
* src/security/security_dac.c (virSecurityDACSetSecurityImageLabel)
(virSecurityDACRestoreSecurityImageLabelInt)
(virSecurityDACSetSecurityAllLabel): Likewise.
* src/security/security_selinux.c
(virSecuritySELinuxRestoreSecurityImageLabelInt)
(virSecuritySELinuxSetSecurityImageLabel)
(virSecuritySELinuxSetSecurityAllLabel): Likewise.
* src/storage/storage_backend.c (virStorageFileBackendForType):
Likewise.
* src/storage/storage_backend_fs.c (virStorageFileBackendFile)
(virStorageFileBackendBlock): Likewise.
* src/storage/storage_backend_gluster.c
(virStorageFileBackendGluster): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc, vboxAttachDrives)
(vboxDomainAttachDeviceImpl, vboxDomainDetachDevice): Likewise.
* src/vmware/vmware_conf.c (vmwareVmxPath): Likewise.
* src/vmx/vmx.c (virVMXParseDisk, virVMXFormatDisk)
(virVMXFormatFloppy): Likewise.
* src/xenxs/xen_sxpr.c (xenParseSxprDisks, xenParseSxpr)
(xenFormatSxprDisk): Likewise.
* src/xenxs/xen_xm.c (xenParseXM, xenFormatXMDisk): Likewise.
* tests/securityselinuxlabeltest.c (testSELinuxLoadDef):
Likewise.
* src/libvirt_private.syms (domain_conf.h): Move symbols...
(virstoragefile.h): ...as appropriate.
Signed-off-by: NEric Blake <eblake@redhat.com>

It's finally time to start tracking disk backing chains in
<domain> XML.  The first step is to start refactoring code
so that we have an object more convenient for representing
each host source resource in the context of a single guest
<disk>.  Ultimately, I plan to move the new type into src/util
where it can be reused by virStorageFile, but to make the
transition easier to review, this patch just creates the
new type then fixes everything until it compiles again.

* src/conf/domain_conf.h (_virDomainDiskDef): Split...
(_virDomainDiskSourceDef): ...to new struct.
(virDomainDiskAuthClear): Use new type.
* src/conf/domain_conf.c (virDomainDiskDefFree): Split...
(virDomainDiskSourceDefClear): ...to new function.
(virDomainDiskGetType, virDomainDiskSetType)
(virDomainDiskGetSource, virDomainDiskSetSource)
(virDomainDiskGetDriver, virDomainDiskSetDriver)
(virDomainDiskGetFormat, virDomainDiskSetFormat)
(virDomainDiskAuthClear, virDomainDiskGetActualType)
(virDomainDiskDefParseXML, virDomainDiskSourceDefFormat)
(virDomainDiskDefFormat, virDomainDiskDefForeachPath)
(virDomainDiskDefGetSecurityLabelDef)
(virDomainDiskSourceIsBlockType): Adjust all users.
* src/lxc/lxc_controller.c (virLXCControllerSetupDisk):
Likewise.
* src/lxc/lxc_driver.c (lxcDomainAttachDeviceMknodHelper):
Likewise.
* src/qemu/qemu_command.c (qemuAddRBDHost, qemuParseRBDString)
(qemuParseDriveURIString, qemuParseGlusterString)
(qemuParseISCSIString, qemuParseNBDString)
(qemuDomainDiskGetSourceString, qemuBuildDriveStr)
(qemuBuildCommandLine, qemuParseCommandLineDisk)
(qemuParseCommandLine): Likewise.
* src/qemu/qemu_conf.c (qemuCheckSharedDevice)
(qemuAddISCSIPoolSourceHost, qemuTranslateDiskSourcePool):
Likewise.
* src/qemu/qemu_driver.c (qemuDomainUpdateDeviceConfig)
(qemuDomainPrepareDiskChainElement)
(qemuDomainSnapshotCreateInactiveExternal)
(qemuDomainSnapshotPrepareDiskExternalBackingInactive)
(qemuDomainSnapshotPrepareDiskInternal)
(qemuDomainSnapshotPrepare)
(qemuDomainSnapshotCreateSingleDiskActive)
(qemuDomainSnapshotUndoSingleDiskActive)
(qemuDomainBlockPivot, qemuDomainBlockJobImpl)
(qemuDomainBlockCopy, qemuDomainBlockCommit): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationIsSafe): Likewise.
* src/qemu/qemu_process.c (qemuProcessGetVolumeQcowPassphrase)
(qemuProcessInitPasswords): Likewise.
* src/security/security_selinux.c
(virSecuritySELinuxSetSecurityFileLabel): Likewise.
* src/storage/storage_driver.c (virStorageFileInitFromDiskDef):
Likewise.
* tests/securityselinuxlabeltest.c (testSELinuxLoadDef):
Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

With the previous commit's securityselinuxhelper enhancements, the
SELinux security manager can be tested even without SELinux enabled on
the test system.
Signed-off-by: NMichael Chapman <mike@very.puzzling.org>

Strings "file" and "context" may not be freed if "VIR_EXPAND_N" fails
and it leads into memory leak.

This has been found by coverity.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

The test case average timing code has not been used by any test
case ever. Delete it to remove complexity.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Daniel Berrange (correctly) pointed out that we should do a better
job of testing selinux labeling fallbacks on NFS disks that lack
labeling support.

* tests/securityselinuxhelper.c (includes): Makefile already
guaranteed xattr support.  Add additional headers.
(init_syms): New function, borrowing from vircgroupmock.c.
(setfilecon_raw, getfilecon_raw): Fake NFS failure.
(statfs): Fake an NFS mount point.
(security_getenforce, security_get_boolean_active): Don't let host
environment affect test.
* tests/securityselinuxlabeldata/nfs.data: New file.
* tests/securityselinuxlabeldata/nfs.xml: New file.
* tests/securityselinuxlabeltest.c (testSELinuxCreateDisks)
(testSELinuxDeleteDisks): Setup and cleanup for fake NFS mount.
(testSELinuxCheckLabels): Test handling of SELinux NFS denial.
Fix memory leak.
(testSELinuxLabeling): Avoid infinite loop on dirty tree.
(mymain): Add new test.

Two complaints of RESOURCE_FREE due to going to cleanup prior to a
VIR_FREE(line).  Two complaints of FORWARD_NULL due to 'tmp' being
accessed after a strchr() without first checking if the return was NULL.

While looking at the code it seems that 'line' need only be allocated
once as the while loop will keep reading into line until eof causing
an unreported leak since line was never VIR_FREE()'d at the bottom of
the loop.

The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.

This patch removes the defaultDiskDriverName from the virCaps
structure. This particular default value is used only in the qemu driver
so this patch uses the recently added callback to fill the driver name
if it's needed instead of propagating it through virCaps.

Move the xmlopt and caps arguments to the end of the argument list.

This patch is the result of running:

for i in $(git ls-files | grep -v html | grep -v \.po$ ); do
  sed -i -e "s/virDomainXMLConf/virDomainXMLOption/g" -e "s/xmlconf/xmlopt/g" $i
done

and a few manual tweaks.

The virCaps structure gathered a ton of irrelevant data over time that.
The original reason is that it was propagated to the XML parser
functions.

This patch aims to create a new data structure virDomainXMLConf that
will contain immutable data that are used by the XML parser. This will
allow two things we need:

1) Get rid of the stuff from virCaps

2) Allow us to add callbacks to check and add driver specific stuff
after domain XML is parsed.

This first attempt removes pointers to private data allocation functions
to this new structure and update all callers and function that require
them.

testutils.c likes to print summaries after a test completes,
including if it failed.  But if the test outright exit()s,
this summary is skipped.  Enforce that we return instead of exit.

* cfg.mk (sc_prohibit_exit_in_tests): New syntax check.
* tests/commandhelper.c (main): Fix offenders.
* tests/qemumonitorjsontest.c (mymain): Likewise.
* tests/seclabeltest.c (main): Likewise.
* tests/securityselinuxlabeltest.c (mymain): Likewise.
* tests/securityselinuxtest.c (mymain): Likewise.
* tests/testutils.h (VIRT_TEST_MAIN_PRELOAD): Likewise.
* tests/testutils.c (virtTestMain): Likewise.
(virtTestCaptureProgramOutput): Use symbolic name.

'make check' has been failing on VPATH builds since commit
907a39e7.  The tests already had magic for munging path names,
but were munging to the wrong location, thus working only on
an in-tree build.

* tests/securityselinuxlabeltest.c (testSELinuxMungePath): Munge
to correct path.

Make sure we override both the raw and non-raw stubs in
securityselinuxhelper.c. Also add diagnostics if
securityselinuxlabeltest fails a test item

There are many aspects of the guest XML which result in the
SELinux driver applying file labelling. With the increasing
configuration options it is desirable to test this behaviour.
It is not possible to assume that the test suite has the
ability to set SELinux labels. Most filesystems though will
support extended attributes. Thus for the purpose of testing,
it is possible to extend the existing LD_PRELOAD hack to
override setfilecon() and getfilecon() to simply use the
'user.libvirt.selinux' attribute for the sake of testing.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>