The virStateInitialize method and several cgroups methods were
using an 'int privileged' parameter or similar for dual-state
values. These are better represented with the bool type.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

To allow actions to be performed in libvirtd when the host
shuts down, or user session exits, introduce a 'stop'
method to virDriverState. This will do things like saving
the VM state to a file.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Implement the new API for sending signals to processes in a guest
for the LXC driver. Only support sending signals to the init
process for now, because

 - The kernel does not appear to expose the mapping between
   container PID numbers and host PID numbers anywhere in the
   host OS namespace
 - There is no race-free way to validate whether a host PID
   corresponds to a process in a container.

* src/lxc/lxc_driver.c: Allow sending processes signals
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

* tools/virsh.c: Add send-process-signal
* tools/virsh.pod: Document new command
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

* src/remote/remote_protocol.x: message definition
* src/remote/remote_driver.c: Register driver function
* src/remote_protocol-structs: Test case
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add an API for sending signals to arbitrary processes in the
guest OS. This is primarily useful for container based virt,
but can be used for machine virt too, if there is a suitable
guest agent,

* include/libvirt/libvirt.h.in: Add virDomainSendProcessSignal
  and virDomainProcessSignal enum
* src/driver.h: Driver entry point
* src/libvirt.c, src/libvirt_public.syms: Impl for new API
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

As of 1a50ba2c we fail to connect to the
monitor instead of getting an exit status != 0 from qemu itself.  This
breaks capabilities probing for the non QMP case.

The documentation to this API has some defects from
grammar and wording POV. These were raised after I've
pushed the patches, so they are in a separate commit.

The 3 options accept 0, and merely checking for non-zero values
would cause wrong results.

It makes no sense to fail the whole getting command if there is
a parameter unsupported by the kernel. This patch fixes it by
omitting the unsupported parameter for getMemoryParameters.

And for setMemoryParameters, this checks if there is an unsupported
parameter up front of the setting, and just returns failure if not
all parameters are supported.

Replace the following names

 * struct qemu_snap_remove  with virQEMUSnapRemovePtr
 * struct qemu_snap_reparent with virQEMUSnapReparentPtr
 * struct qemu_save_header with virQEMUSaveHeaderPtr
 * enum qemu_save_formats with virQEMUSaveFormat
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Remove the obsolete 'qemud' naming prefix and underscore
based type name. Introduce virQEMUDriverPtr as the replacement,
in common with LXC driver naming style

This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=879473

The name attribute is required for portgroup elements (yes, the RNG
specifies that), and there is code in libvirt that assumes it is
non-null.  Unfortunately, the portgroup parsing function wasn't
checking for lack of portgroup. One adverse result of this was that
attempts to update a network by adding a portgroup with no name would
cause libvirtd to segfault. For example:

   virsh net-update default add portgroup "<portgroup default='yes'/>"

This patch causes virNetworkPortGroupParseXML to fail if no name is
specified, thus avoiding any later problems.

Throughout the code, we've always used VIR_DOMAIN_SHUTDOWN* flags
even for virDomainReboot() API and its implementation. Fortunately,
the appropriate macros has the same value. But if we want to keep
things consistent, we should be using the correct macros. This
patch doesn't break anything, luckily.

see commit 7e5aa78d

* src/interface/interface_backend_udev.c: Declare variable sooner.

Commit cb022152 went overboard and introduced a dead conditional
while trying to get rid of a potential NULL dereference.

* src/nwfilter/nwfilter_dhcpsnoop.c (virNWFilterSnoopReqNew):
Remove redundant conditional.

This reverts 8927c0ea qemu: fix a crash when save file can't be opened
and allows virFileWrapperFdCatchError to be called with NULL instead.

If it's negative, this might result in a request to allocate lots of
memory.

In a few places, the return value could get passed to VIR_ALLOC_N without
being checked, resulting in a request to allocate a lot of memory if the
return value was negative.

The error messages did not correspond to the attributes they printed.

Missing break in the switch.

The size of the controllers array is VIR_CGROUP_CONTROLLER_LAST, however
we only call it with values less than VIR_CGROUP_CONTROLLER_LAST.

This can't lead to a crash since virNWFilterSnoopReqNew is only called
with a static array as the argument, but if we check for NULL we should
do it right.

Error messages produced while dispatching guest agent commands didn't
have an apparent reference to the fact that they are dealing with guest
agent commands. This patch fixes up some of the messages to contain that
reference.

Just a little rewrite of the cmdDomDisplay function to make it
consistent and hopefully more readable.  This also fixes a problem
with password not being displayed for vnc even with the
"--include-password" option.

It's exposed under domfstrim command. Although the API
doesn't support specifying mount point yet, expose it
anyway.

using qemu guest agent. As said in previous patch,
@mountPoint must be NULL and @flags zero because
qemu guest agent doesn't support these arguments
yet. If qemu learns them, we can start supporting
them as well.

A new rule to fixup_name() in gendispatch.pl needs to be added,
otherwise we are left with remoteDomainFstrim which is not wanted.

This will call FITRIM within guest. The API has 4 arguments,
however, only 2 will be used for now (@dom and @minumum).
The rest two are there if in future qemu guest agent learns them.

With QMP capability probing, the version was not set.
virsh version returns:
...
Cannot extract running QEMU hypervisor version

This is fixed by computing caps->version from QMP major,
minor, micro values.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

QMP Capability probing will fail if QEMU cannot bind to the
QMP monitor socket in the qemu_driver->libDir directory.
That's because the child process is stripped of all
capabilities and this directory is chown'ed to the configured
QEMU user/group (normally qemu:qemu) by the QEMU driver.

To prevent this from happening, the driver startup will now pass
the QEMU uid and gid down to the capability probing code.
All capability probing invocations of QEMU will be run with
the configured QEMU uid instead of libvirtd's.

Furter, the pid file handling is moved to libvirt, as QEMU
cannot write to the qemu_driver->runDir (root:root). This also
means that the libvirt daemonizing must be used.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

If qemuMonitorOpenUnix is called without a related pid, i.e. for
QMP probing, a connect failure can happen as the result of a race.
Without a pid there is no retry and thus we give up too early.
This changes the code to retry if no pid is supplied.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

we already have virtualize meminfo for container through fuse filesystem,
add function lxcContainerMountProcFuse to mount this meminfo file to
the container's /proc/meminfo.

So we can isolate container's /proc/meminfo from host now.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

with this patch,container's meminfo will be shown based on
containers' mem cgroup.

Right now,it's impossible to virtualize all values in meminfo,
I collect some values such as MemTotal,MemFree,Cached,Active,
Inactive,Active(anon),Inactive(anon),Active(file),Inactive(anon),
Active(file),Inactive(file),Unevictable,SwapTotal,SwapFree.

if I miss something, please let me know.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

because libvirt_lxc's cgroup mountpoint is what it shown
in /proc/self/cgroup.

we can get container's cgroup through virCgroupNew("/", &group),
add interface virCgroupGetAppRoot to help container to
get it's cgroup.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

virCgroupGetMemSwapUsage is used to get container's swap usage,
with this interface,we can get swap usage in fuse filesystem.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

this patch addes fuse support for libvirt lxc.
we can use fuse filesystem to generate sysinfo dynamically,
So we can isolate /proc/meminfo,cpuinfo and so on through
fuse filesystem.

we mount fuse filesystem for every container.
the mount name is libvirt,mount point is
localstatedir/run/libvirt/lxc/containername.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

Add a configure option --with-fuse to prepare introduction
of fuse support for libvirt lxc.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>