The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in cpu_conf.{h,c} and update all callers to
match

The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in storage_conf.{h,c} and storage_encryption_conf.{h,c}
and update all callers to match

The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in node_device_conf.{h,c} and update all callers to
match

The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in network_conf.{h,c} and update all callers to
match

* src/conf/node_device_conf.c: string saved into XML should be escaped
  with the use of virBufferEscapeString()

It was used for error reporting only.

* src/conf/domain_conf.c (virDomainChrDefParseXML): Don't leak a
virDomainChrDef buffer upon "unknown target type for char device" error.

* src/conf/interface_conf.c (virInterfaceDefParseProtoIPv4): If
virXPathNodeSet returns -1, indicate failure by returning -1 right away.
(virInterfaceDefParseProtoIPv6): Likewise.

* src/conf/storage_conf.c (virStoragePoolSourceListNewSource):
Remove an unused (and leaked) allocation.

When attaching a USB host device based on vendor/product, libvirt
will resolve the vendor/product into a device/bus pair. This means
that when printing XML we should allow device/bus info to be printed
at any time if present

* src/conf/domain_conf.c, docs/schemas/domain.rng: Allow USB device
  bus info alongside vendor/product

The current way of assigning names to the host network backend and
NIC device in QEMU was over complicated, by varying naming scheme
based on the NIC model and backend type. This simplifies the naming
to simply be 'net0' and 'hostnet0', allowing code to easily determine
the host network name and vlan based off the primary device alias
name 'net0'. This in turn allows removal of alot of QEMU specific
code from the XML parser, and makes it easier to assign new unique
names for NICs that are hotplugged

* src/conf/domain_conf.c, src/conf/domain_conf.h: Remove hostnet_name
  and vlan fields from virNetworkDefPtr
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c:
  Use a single network alias naming scheme regardless of NIC type
  or backend type. Determine VLANs from the alias name.
* tests/qemuxml2argvdata/qemuxml2argv-net-eth-names.args,
  tests/qemuxml2argvdata/qemuxml2argv-net-virtio-device.args,
  tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.args: Update
  for new simpler naming scheme

The virDomainDeviceInfoIterate() function will provide a
convenient way to iterate over all devices in a domain.

* src/conf/domain_conf.c, src/conf/domain_conf.h,
  src/libvirt_private.syms: Add virDomainDeviceInfoIterate()
  function.

This reverts commit cdc42d0a.
As DanB pointed out, this patch is actually wrong.  The real
bug that was causing me to see this problem is a bug
introduced in a RHEL-5 libvirt snapshot, and I'm going to
fix the real bug there.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

The <console> tag is supposed to result in addition of a single
<serial> device for HVM guests. The 'targetType' attribute was
missing though causing the compatibility code to add a second
<console> device

* src/conf/domain_conf.c: Set targetType for serial device

When libvirtd shuts down, it places a <state/> tag in the XML
state file it writes out for guests with PCI passthrough
devices.  For devices that are attached at bootup time, the
state tag is empty.  However, at libvirtd startup time, it
ignores anything with a <state/> tag in the XML, effectively
hiding the guest.
This patch remove the check for VIR_DOMAIN_XML_INTERNAL_STATUS
when parsing the XML.
* src/conf/domain_conf.c: remove VIR_DOMAIN_XML_INTERNAL_STATUS
  flag check in virDomainHostdevSubsysPciDefParseXML()

* src/conf/domain_conf.c (virDomainDeviceInfoParseXML): Use "%s".

Allows the initiator to use a variety of IQNs rather than just the
system IQN when creating iSCSI pools.
* docs/schemas/storagepool.rng: extends the syntax with <iqn name="..."/>
* src/conf/storage_conf.[ch]: read and stores the iqn name
* src/storage/storage_backend_iscsi.[ch]: implement the IQN selection
  when detected

* src/conf/domain_conf.c (virDomainChrDefFormat): Plug a leak on
an error path, and at the same time, eliminate the need for a
"cleanup:" block.  Before, the "return -1" after the switch
would leak an "addr" string.  Now, by reversing the port,addr-
getting blocks we can free "addr" immediately and skip the goto.

The 'int virInterfaceIsActive()' method was directly returning the
value of the 'int active:1' bitfield in virIntefaceDefPtr. A bitfield
with a signed integer, will hold the values 0 and -1, not 0 and +1
as might be expected. This meant that virInterfaceIsActive() was
always returning -1 when the interface was active, not +1 & thus all
callers thought an error had occurred. To protect against this kind
of mistake again, change all bitfields to be unsigned ints

* daemon/libvirtd.h, src/conf/domain_conf.h, src/conf/interface_conf.h,
  src/conf/network_conf.h: Change bitfields to unsigned int.

This was accomplished in xml parsing by doing away with the
stripped-down virInterfaceBareDef object, and just always using
virInterfaceDef, but with restrictions in certain places (eg, the type
of subordinate interface allowed in parsing depends on the parent
interface).

xml formatting was similarly adjusted. In addition, the formatting
functions keep track of the level of interface nesting, and insert
extra leading spaces on each line accordingly (using %*s).

The only change in formatted xml from previous (aside frmo supporting
new combinations of interface types) is that the subordinate ethernet
interfaces take up 2 lines rather than one, eg:

   <interface type='ethernet' name='eth0'>
   </interface>

instead of:

   <interface type='ethernet' name='eth0'/>

* src/conf/storage_conf.c (virStoragePoolSourceListNewSource):
Free just-allocated "source" upon VIR_REALLOC_N failure.

Currently CPU topology may only be specified together with CPU model:
    <cpu match='exact'>
        <model>name</model>
        <topology sockets='1' cores='2' threads='3'/>
    </cpu>

This patch allows for CPU topology specification without the need for
also specifying CPU model:
    <cpu>
        <topology sockets='1' cores='2' threads='3'/>
    </cpu>

'match' attribute and 'model' element are made optional with the
restriction that 'match' attribute has to be set when 'model' is
present.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Although the serial, parallel, chanel, input & fs devices do
not have PCI address info, they can all have device aliases.
Thus it neccessary to associate the virDomainDeviceInfo data
with them all.

* src/conf/domain_conf.c, src/conf/domain_conf.h: Add hooks for
  parsing / formatting device info for serial, parallel, channel
  input and fs devices.
* docs/schemas/domain.rng: Associate device info with character
  devices, input & fs device

This patch introduces the support for giving all devices a short,
unique name, henceforth known as a 'device alias'.  These aliases
are not set by the end user, instead being assigned by the hypervisor
if it decides it want to support this concept.

The QEMU driver sets them whenever using the -device arg syntax
and uses them for improved hotplug/hotunplug. it is the intent
that other APIs (block / interface stats & device hotplug) be
able to accept device alias names in the future.

The XML syntax is

   <alias name="video0"/>

This may appear in any type of device that supports device info.

* src/conf/domain_conf.c, src/conf/domain_conf.h: Add a 'alias'
  field to virDomainDeviceInfo struct & parse/format it in XML
* src/libvirt_private.syms: Export virDomainDefClearDeviceAliases
* src/qemu/qemu_conf.c: Replace use of "nic_name" field with the
  standard device alias
* src/qemu/qemu_driver.c: Clear device aliases at shutdown

The PCI device addresses are only valid while the VM is running,
since they are auto-assigned by QEMU. After shutdown they must
all be cleared. Future QEMU driver enhancement will allow for
persistent PCI address assignment

* src/conf/domain_conf.h, src/conf/domain_conf.c, src/libvirt_private.syms
  Add virDomainDefClearPCIAddresses() method for wiping out auto assigned
  PCI addresses
* src/qemu/qemu_driver.c: Clear PCI addresses at VM shutdown

Existing applications using libvirt are not aware of the disk
controller concept. Thus, after parsing the <disk> definitions
in the XML, it is neccessary to create <controller> elements
to satisfy all requested disks, as per their defined drive
addresses

* src/conf/domain_conf.c, src/conf/domain_conf.h,
  src/libvirt_private.syms: Add virDomainDefAddDiskControllers()
  method for populating disk controllers, and call it after
  parsing disk definitions.
* src/qemu/qemu_conf.c: Call virDomainDefAddDiskControllers()
  when doing ARGV -> XML conversion
* tests/qemuxml2argvdata/qemuxml2argv*.xml: Add disk controller
  data to all data files which don't have it already

It is perfectly acceptable to have multiple sound devices of
same type in guest configuration. If the underlying hypervisor
does not like this, it is its job to complain, not the XML
parser's

* src/conf/domain_conf.c: Remove hack which deleted duplicated
  sound device models.
* tests/xml2sexprdata/xml2sexpr-fv-sound.xml: Remove duplicate
  models

* src/conf/domain_conf.c: add defaults for the video device
* src/esx/esx_vmx.[ch]: add VNC support to the VMX handling
* tests/vmx2xmltest.c, tests/xml2vmxtest.c: add tests for the VNC support

* src/conf/domain_conf.c: Allow virDomainDeviceInfoIsSet,
  virDomainDeviceInfoClear & virDomainDeviceInfoFormat when
  building Xen proxy

This augments virDomainDevice with a <controller> element
that is used to represent disk controllers (e.g., scsi
controllers). The XML format is given by

  <controller type="scsi" index="<num>">
     <address type="pci" domain="0xNUM" bus="0xNUM" slot="0xNUM"/>
  </controller>

where type denotes the disk interface (scsi, ide,...), index
is an integer that identifies the controller for association
with disks, and the <address> element specifies the controller
address on the PCI bus as described in previous commits
The address element can be omitted; in this case, an address
will be assigned automatically.

Most of the code in this patch is from Wolfgang Mauerer's
previous disk controller series

 * docs/schemas/domain.rng: Define syntax for <controller>
   XML element
 * src/conf/domain_conf.c, src/conf/domain_conf.h: Define
   virDomainControllerDef struct, and routines for parsing
   and formatting XML
* src/libvirt_private.syms: Add virDomainControllerInsert
   and virDomainControllerDefFree

When parsing the <disk> element specification, if no <address>
is provided for the disk, then automatically assign one based on
the <target dev='sdXX'/> device name. This provides for backwards
compatability with existing applications using libvirt, while also
allowing new apps to have complete fine grained control.

* src/conf/domain_conf.h, src/conf/domain_conf.c,
  src/libvirt_private.syms: Add virDomainDiskDefAssignAddress()
  for assigning a controller/bus/unit address based on disk target
* src/qemu/qemu_conf.c: Call virDomainDiskDefAssignAddress() after
  generating XML from ARGV
* tests/qemuxml2argvdata/*.xml: Add in drive address information
  to all XML files

Add the virDomainDeviceAddress information to the sound, video
and watchdog devices. This means all of them gain the new XML
element

  <address .... />

This brings them upto par with disk/net/hostdev devices which
already have address info

* src/conf/domain_conf.h: Add virDomainDeviceAddress to sound,
  video & watchdog device struts.
* src/conf/domain_conf.c: Hook up parsing/formatting for
  virDomainDeviceAddress in sound, video & watchdog devices
* docs/schemas/domain.rng: Associate device address info
  with sound, video & watchdog

Introduce a new structure

      struct _virDomainDeviceDriveAddress {
        unsigned int controller;
        unsigned int bus;
        unsigned int unit;
      };

and plug that into virDomainDeviceAddress and generates XML that
looks like

  <address type='drive' controller='1' bus='0' unit='5'/>

This syntax will be used by the QEMU driver to explicitly control
how drives are attached to the bus

* src/conf/domain_conf.h, src/conf/domain_conf.c: Parsing and
  formatting of drive addresses
* docs/schemas/domain.rng: Define new address format for drives

All guest devices now use a common device address structure
summarized by:

  enum virDomainDeviceAddressType {
    VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE,
    VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI,
  };

  struct _virDomainDevicePCIAddress {
    unsigned int domain;
    unsigned int bus;
    unsigned int slot;
    unsigned int function;
  };

  struct _virDomainDeviceInfo {
    int type;
    union {
        virDomainDevicePCIAddress pci;
    } addr;
  };

This replaces the anonymous structs in Disk/Net/Hostdev data
structures. Where available, the address is *always* printed
in the XML file, instead of being hidden in the internal state
file.

  <address type='pci' domain='0x0000' bus='0x1e' slot='0x07' function='0x0'/>

The structure definition is based on Wolfgang Mauerer's disk
controller patch series.

* docs/schemas/domain.rng: Define the <address> syntax and
  associate it with disk/net/hostdev devices
* src/conf/domain_conf.h, src/conf/domain_conf.c,
  src/libvirt_private.syms: APIs for parsing/formatting address
  information. Also remove the QEMU specific 'pci_addr' attributes
* src/qemu/qemu_driver.c: Replace use of 'pci_addr' attrs with
  new standardized format.