The current lxcSetupInterfaces() method directly performs setup
of the bridge devices. Since it will shortly need to also create
macvlan devices, move the bridge related code into a separate
method

* src/lxc/lxc_driver.c: Split lxcSetupInterfaces() to create a
  new lxcSetupInterfaceBridge()

The virDomainNetGetActualBridgeName and virDomainNetGetActualDirectDev
methods both return strings that point to data in the virDomainDefPtr
struct, and should therefore not be freed. The return values should
thus be 'const char *' not 'char *'.

* src/conf/domain_conf.c, src/conf/domain_conf.h: Mark const
* src/network/bridge_driver.c: Update to use a const char *

Fix ordering of symbols after re-arranging network device
management API source files

* src/libvirt_private.syms: Fix ordering

Move the ifaceMacvtapLinkDump and ifaceGetNthParent functions
into virnetdevvportprofile.c since they are specific to that
code. This avoids polluting the headers with the Linux specific
netlink data types

* src/util/interface.c, src/util/interface.h: Move
  ifaceMacvtapLinkDump and ifaceGetNthParent functions and delete
  remaining file
* src/util/virnetdevvportprofile.c: Add ifaceMacvtapLinkDump
  and ifaceGetNthParent functions
* src/network/bridge_driver.c, src/nwfilter/nwfilter_gentech_driver.c,
  src/nwfilter/nwfilter_learnipaddr.c, src/util/virnetdevmacvlan.c:
  Remove include of interface.h

Move virNetDevIsVirtualFunction, virNetDevGetVirtualFunctionIndex
and virNetDevGetPhysicalFunction to virnetdev.c

* src/util/interface.c, src/util/interface.h, src/util/virnetdev.c,
  src/util/virnetdev.h: Move APIs

Rename ifaceIsVirtualFunction to virNetDevIsVirtualFunction,
ifaceGetVirtualFunctionIndex to virNetDevGetVirtualFunctionIndex
and ifaceGetPhysicalFunction to virNetDevGetPhysicalFunction

* src/util/interface.c, src/util/interface.h: Rename APIs
* src/util/virnetdevvportprofile.c: Update for API rename

* src/util/interface.c, src/util/interface.h: Remove virNetDevValidateConfig
* src/util/virnetdev.c, src/util/virnetdev.h: Add virNetDevValidateConfig

Rename the ifaceCheck method to virNetDevValidateConfig and change
so that it always raises an error and returns -1 on error.

* src/util/interface.c, src/util/interface.h: Rename ifaceCheck
  to virNetDevValidateConfig
* src/nwfilter/nwfilter_gentech_driver.c,
  src/nwfilter/nwfilter_learnipaddr.c: Update for API rename

Move the virNetDevGetIPv4Address function to virnetdev.c

* util/interface.c, util/interface.h: Remove virNetDevGetIPv4Address
* util/virnetdev.c, util/virnetdev.h: Add virNetDevGetIPv4Address

To match up with the existing virNetDevSetIPv4Address, rename
ifaceGetIPAddress to virNetDevGetIPv4Address

* util/interface.h, util/interface.c: Rename API
* network/bridge_driver.c: Update for API rename

Move virNetDevGetIndex & virNetDevGetVLanID to virnetdev.c to
suit their functional purpose

* util/interface.c, util/interface.h: Remove virNetDevGetIndex &
  virNetDevGetVLanID
* util/virnetdev.c, util/virnetdev.h: Add virNetDevGetIndex &
  virNetDevGetVLanID

Rename the ifaceGetIndex method to virNetDevGetIndex and
ifaceGetVlanID to virNetDevGetVLanID. Also change the error
reporting behaviour to always raise errors and return -1 on
failure

* util/interface.c, util/interface.h: Rename ifaceGetIndex
  and ifaceGetVLAN
* nwfilter/nwfilter_gentech_driver.c, nwfilter/nwfilter_learnipaddr.c,
  nwfilter/nwfilter_learnipaddr.c, util/virnetdevvportprofile.c: Update
  for API renames and error handling changes

Move virNetDevReplaceMacAddress and virNetDevRestoreMacAddress
to the virnetdev.c file where they naturally belong

* util/interface.c, util/interface.h: Remove
  virNetDevReplaceMacAddress and virNetDevRestoreMacAddress
* util/virnetdev.c, util/virnetdev.h: Add
  virNetDevReplaceMacAddress and virNetDevRestoreMacAddress

Rename ifaceReplaceMacAddress to virNetDevReplaceMacAddress
and ifaceRestoreMacAddress to virNetDevRestoreMacAddress.

* util/interface.c, util/interface.h, util/virnetdevmacvlan.c:
  Rename APIs

Move the low level macvlan creation APIs into the
virnetdevmacvlan.c file where they more naturally
belong

* util/interface.c, util/interface.h: Remove virNetDevMacVLanCreate
  and virNetDevMacVLanDelete
* util/virnetdevmacvlan.c, util/virnetdevmacvlan.h: Add
  virNetDevMacVLanCreate and virNetDevMacVLanDelete

Rename ifaceMacvtapLinkAdd to virNetDevMacVLanCreate and
ifaceLinkDel to virNetDevMacVLanDelete. Strictly speaking
the latter isn't restricted to macvlan devices, but that's
the only use libvirt has for it.

* util/interface.c, util/interface.h,
  util/virnetdevmacvlan.c: Rename APIs

Rename virNetDevMacVLanCreate to virNetDevMacVLanCreateWithVPortProfile
and virNetDevMacVLanDelete to virNetDevMacVLanDeleteWithVPortProfile

To make way for renaming the other macvlan creation APIs in
interface.c

* util/virnetdevmacvlan.c, util/virnetdevmacvlan.h,
  qemu/qemu_command.c, qemu/qemu_hotplug.c, qemu/qemu_process.c:
  Rename APIs

Rename the macvtap.c file to virnetdevmacvlan.c to reflect its
functionality. Move the port profile association code out into
virnetdevvportprofile.c. Make the APIs available unconditionally
to callers

* src/util/macvtap.h: rename to src/util/virnetdevmacvlan.h,
* src/util/macvtap.c: rename to src/util/virnetdevmacvlan.c
* src/util/virnetdevvportprofile.c, src/util/virnetdevvportprofile.h:
  Pull in vport association code
* src/Makefile.am, src/conf/domain_conf.h, src/qemu/qemu_conf.c,
  src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update include
  paths & remove conditional compilation

In preparation for code re-organization, rename the Macvtap
management APIs to have the following patterns

  virNetDevMacVLanXXXXX     - macvlan/macvtap interface management
  virNetDevVPortProfileXXXX - virtual port profile management

* src/util/macvtap.c, src/util/macvtap.h: Rename APIs
* src/conf/domain_conf.c, src/network/bridge_driver.c,
  src/qemu/qemu_command.c, src/qemu/qemu_command.h,
  src/qemu/qemu_driver.c, src/qemu/qemu_hotplug.c,
  src/qemu/qemu_migration.c, src/qemu/qemu_process.c,
  src/qemu/qemu_process.h: Update for renamed APIs

Add routines to generate -numa QEMU command line option based on
<numa> ... </numa> XML specifications.
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>

This patch adds XML definitions for guest NUMA specification and contains
routines to parse the same. The guest NUMA specification looks like this:

<cpu>
        ...
        <topology sockets='2' cores='4' threads='2'/>
        <numa>
                <cell cpus='0-7' memory='512000'/>
                <cell cpus='8-15' memory='512000'/>
        </numa>
        ...
</cpu>
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>

For whatever reason, the kernel allows you to create a regular
file named /dev/sdc.12345; although this file will disappear the
next time devtmpfs is remounted.  If you let libvirt generate
the name of the external snapshot for a disk image originally
using the block device /dev/sdc, then the domain will be rendered
unbootable once the qcow2 file is lost on the next devtmpfs
remount.  In this case, the user should have used 'virsh
snapshot-create --xmlfile' or 'virsh snapshot-create-as --diskspec'
to specify the name for the qcow2 file in a sane location, rather
than relying on libvirt generating a name that is most likely to
be wrong.  We can help avoid naive mistakes by enforcing that
the user provide the external name for any backing file that is
not a regular file.

* src/conf/domain_conf.c (virDomainSnapshotAlignDisks): Only
generate names if backing file exists as regular file.
Reported by MATSUDA Daiki.

I missed adding virNetServerGetDBusConn() to libvirtd_private.syms
in commit b8adfcc6, which didn't cause a problem in 0.9.6 but
results in this build error in 0.9.7

libvirtd-remote.o: In function `remoteDispatchAuthPolkit':
remote.c:(.text+0x188dd): undefined reference to `virNetServerGetDBusConn'

As noted by Daniel Berrange [1], the proper fix for the older
PolicyKit build issue is to add virNetServerGetDBusConn to
libvirt_private.syms.  Revert unnecessary changes to
daemon/Makefile.am

[1] https://www.redhat.com/archives/libvir-list/2011-November/msg00852.html

One of the top questions by libvirt users is how to create a host
bridge device so that guests can be directly on the physical
network. There are several example documents that explain how to do
this manually, but following them often results in confusion and
failure. virt-manager does a good job of creating a bridge based on an
existing network device, but not everyone wants to use virt-manager.

This patch adds a new command, iface-bridge that makes it just about
as simple as possible to create a new bridge device based on an
existing ethernet/vlan/bond device (including associating IP
configuration with the bridge rather than the now-attached device),
and start that new bridge up ready for action, eg:

    virsh iface-bridge eth0 br0

For symmetry's sake, it also adds a command to remove a device from a
bridge, restoring the IP config to the now-unattached device:

    virsh iface-unbridge br0

(I had a short debate about whether to do "iface-unbridge eth0"
instead, but that would involve searching through all bridge devices
for the one that contained eth0, which seems like a bit too much
trouble).

NOTE: These two commands require that the netcf library be available
on the host. Hopefully this will provide some extra incentive for
people using suse, debian, ubuntu, and other similar systems to polish
up (and push downstream) the ports to those distros recently pushed to
the upstream netcf repo by Dan Berrange. Anyone interested in helping
with that effort in any way should join the netcf-devel mailing list
(subscription info at
https://fedorahosted.org/mailman/listinfo/netcf-devel)

During creation of the bridge, it's possible to specify whether or not
the STP protocol should be started up on the bridge and, if so, how
many seconds the bridge should squelch traffic from newly added
devices while learning new topology (defaults are stp='on' and
delay='0', which seems to usually work best for bridges used in the
context of libvirt guests).

There is also an option to not immediately start the bridge (and a
similar option to not immediately start the un-attached device after
destroying the bridge. Default is to start the new device, because in
the case of iface-unbridge not starting is strongly discouraged as it
will leave the system with no network connectivity on that interface
(because it's necessary to destroy/undefine the bridge device before
the unattached device can be defined), and it seemed better to make
the option for iface-bridge behave consistently.

NOTE TO THOSE TRYING THESE COMMANDS FOR THE FIRST TIME: to guard
against any "unexpected" change to configuration, it is advisable to
issue an "virsh iface-begin" command before starting any interface
config changes, and "virsh iface-commit" only after you've verified
that everything is working as you expect. If something goes wrong,
you can always run "virsh iface-rollback" or reboot the system (which
should automatically do iface-rollback).

Aside from adding the code for these two functions, and the two
entries into the command table, the only other change to virsh.c was
to add the option name to vshCommandOptInterfaceBy(), because the
iface-unbridge command names its interface option as "bridge".

virsh.pod has also been updated with short descriptions of these two
new commands.

This is a fatal typo believed to be very likely to happen when using
both i and j at the same time for indexing.

Due to the asynchronous nature of streams, we might continue to
receive some stream packets from the server even after we have
shutdown the stream on the client side. These should be discarded
silently, rather than raising an error in the RPC layer.

* src/rpc/virnetclient.c: Discard stream data silently

Very occasionally the sequence of events from poll would result
in getting a HANGUP on its own, instead of a HANGUP+READABLE
at the same time. In the former case we would send back an error
event to the client, but never send the empty packet to indicate
EOF.

Add a new virNetClientSendNonBlock which returns 2 on
full send, 1 on partial send, 0 on no send, -1 on error

If a partial send occurs, then a subsequent call to any
of the virNetClientSend* APIs will finish any outstanding
I/O.

TODO: the virNetClientEvent event handler could be used
to speed up completion of partial sends if an event loop
is present.

* src/rpc/virnetsocket.h, src/rpc/virnetsocket.c: Add new
  virNetSocketHasPendingData() API to test for cached
  data pending send.
* src/rpc/virnetclient.c, src/rpc/virnetclient.h: Add new
  virNetClientSendNonBlock() API to send non-blocking API

* src/rpc/virnetclient.c: Add helper for setting I/O callback events

Stop multiplexing virNetClientSend for two different purposes,
instead add virNetClientSendWithReply and virNetClientSendNoReply

* src/rpc/virnetclient.c, src/rpc/virnetclient.h: Replace
  virNetClientSend with virNetClientSendWithReply and
  virNetClientSendNoReply
* src/rpc/virnetclientprogram.c, src/rpc/virnetclientstream.c:
  Update for new API names

Remove some duplication by pulling the code for passing the
buck out into a helper method

* src/rpc/virnetclient.c: Introduce virNetClientIOEventLoopPassTheBuck

Instead of inferring whether the buck is held from the waitDispatch
pointer, use an explicit 'bool haveTheBuck' field

* src/rpc/virnetclient.c: Explicitly track the buck

Directly messing around with the linked list is potentially
dangerous. Introduce some helper APIs to deal with list
manipulating the list

* src/rpc/virnetclient.c: Create linked list handlers

Signed-off-by: NEli Qiao <taget@linux.vnet.ibm.com>

This improves the support for qemu rbd devices by adding support for a few
key features (e.g., authentication) and cleaning up the way in which
rbd configuration options are passed to qemu.

An <auth> member of the disk source xml specifies how librbd should
authenticate. The username attribute is the Ceph/RBD user to authenticate as.
The usage or uuid attributes specify which secret to use. Usage is an
arbitrary identifier local to libvirt.

The old RBD support relied on setting an environment variable to
communicate information to qemu/librbd.  Instead, pass those options
explicitly to qemu.  Update the qemu argument parsing and tests
accordingly.
Signed-off-by: NSage Weil <sage@newdream.net>
Signed-off-by: NJosh Durgin <josh.durgin@dreamhost.com>

I missed adding libvirt_driver_remote.la to libvirtd_LDADD in
commit b8adfcc6, which didn't cause a problem in 0.9.6 but
results in this build error in 0.9.7

libvirtd-remote.o: In function `remoteDispatchAuthPolkit':
remote.c:(.text+0x188dd): undefined reference to `virNetServerGetDBusConn'

Replacing the strchr call with two variables through a strstr call.
Calling strchr with two variables triggers a gcc 4.3/4.4
bug when used in combination with -Wlogical-op and at least -O1.

include stdint.h to fix the build