Reformat the vCPU description to use list elements rather than one long
run-on paragraph
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

On some places in the libvirt code we have:

  f(a,z)

instead of

  f(a, z)

This trivial patch fixes couple of such occurrences.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Wrong error code in config errors reporting was used. Fixed it.

Libvirt measures vram in Kbytes, not in bytes, so calculation
of Mbytes was incorrect. PCS server can take vram argument
with units, so I added K postfix to make params a little bit clearer.

That function caused errors in libvirtd logs when OpenStack Nova
starts VM instance.
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1064770Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NLi Yang <liyang.fnst@cn.fujitsu.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This eliminates the need for active waiting.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=927369Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

That sets a new flag, but that flag does mean the child will get
LISTEN_FDS and LISTEN_PID environment variables properly set and
passed FDs reordered so that it corresponds with LISTEN_FDS (they must
start right after STDERR_FILENO).
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Even line like this:

int asdf = i - somevar;

was matched by the regex, so this patch adds '=' to the list of
characters that break the regexp.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

First FD is the RW unix socket to listen on, second one (if
applicable) is the RO unix socket.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

It's just a wrapper around NewFD and NewUNIX that selects the right
option and increments the number of used FDs.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Since not only systemd can do this (we'll be doing it as well few
patches later), change 'systemd' to 'caller' and fix LISTEN_FDS to
LISTEN_PID where applicable.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

When formatting the forward mode addresses or interfaces the switch was
done based on the type of the network rather than of the type of the
individual <interface>/<address> element. In case a user would specify
an incorrect network type ("passhtrough") with <address> elements,
libvirtd would crash as it would attempt to format an <interface>.

Use the type of the individual element to format the XML.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1132347

Signed-off-by: NLi Yang <liyang.fnst@cn.fujitsu.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1078126

Using 'virsh attach-device --config' (or --persistent) to attach a
file backed lun device will succeed; however, subsequent domain restarts
will result in failure because the configuration of a file backed lun
is not supported.

Although allowing 'illegal configurations' is something that can be
allowed, it may not be practical in this case. Generally, when attaching
a device to a domain means the domain must be running. A way around
this is using the --config (or --persistent) option. When an attach
is done to a running domain, a temporary configuration is modified
first followed by the live update. The live update will make a number
of disk validity checks when building the qemu command to attach the
disk. If any fail, then change is rejected.

Rather than allow a potentially illegal combination, adjust the code
in the configuration path to make the same checks as the running path
will make with respect to disk validity checks. This way we avoid
having the potential for some subsequent start/reboot to fail because
an illegal combination was allowed.

NB: The live path still checks the configuration since it is possible
to just do --live guest modification...

The error message contains one extra dash.

Since vbox driver rewrite the virDriver structure init moved from
vbox_tmpl.c into vbox_common.c. However, our hvsupport.pl script
doesn't count with that. It still parses vbox_tmp.c and looks for
virDriver structure which is not found there anymore. As a result,
at hvsupport page is seems like vbox driver doesn't support
anything.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

In case the host has 2 or more NUMA nodes, we fetch CPU map for each
node. However, we need to free the CPU map in between loops:

==29513== 96 (72 direct, 24 indirect) bytes in 3 blocks are definitely lost in loss record 951 of 1,264
==29513==    at 0x4C2A700: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==29513==    by 0x52AD24B: virAlloc (viralloc.c:144)
==29513==    by 0x52AF0E6: virBitmapNew (virbitmap.c:78)
==29513==    by 0x52FB720: virNumaGetNodeCPUs (virnuma.c:294)
==29513==    by 0x53C700B: nodeCapsInitNUMA (nodeinfo.c:1886)
==29513==    by 0x11759708: vboxCapsInit (vbox_common.c:398)
==29513==    by 0x11759CC4: vboxConnectOpen (vbox_common.c:514)
==29513==    by 0x53C965F: do_open (libvirt.c:1147)
==29513==    by 0x53C9EBC: virConnectOpen (libvirt.c:1317)
==29513==    by 0x142905: remoteDispatchConnectOpen (remote.c:1215)
==29513==    by 0x126ADF: remoteDispatchConnectOpenHelper (remote_dispatch.h:2346)
==29513==    by 0x5453D21: virNetServerProgramDispatchCall (virnetserverprogram.c:437)
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The "maxMemory" element was never supported by libvirt. Remove it from
the test XMLs. (Found while actually trying to add support for a
identically named element).

And add a syntax-check for '){$'.  It's not perfect, but better than
nothing.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1103245

An advice appeared there on the qemu-devel list [1]. When a domain is
suspended and then resumed guest kernel is not aware of this. So we've
introduced virDomainSetTime API that resets the time within guest
using qemu-ga. On the other hand, qemu itself is trying to make RTC
beat faster to catch the difference. But if we don't tell qemu that
guest's time was reset via the other method, both mechanisms are
applied resulting in again wrong guest time. In order to avoid summing
both corrections we need to tell qemu that it should not use the RTC
injection if the guest time is set via guest agent.

1: http://www.mail-archive.com/qemu-devel@nongnu.org/msg236435.htmlSigned-off-by: NMichal Privoznik <mprivozn@redhat.com>

Partially resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1131306Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Partially resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1131306Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

The build failure is caused by a false positive of some static analysys
steps done by gcc (that don't happen on -O0).

When a user would try changing the persistent IO tuning settings for a
disk that was hotplugged to a vm in a transient way, the
qemuDomainSetBlockIoTune API would use the same index for both the
live and config disk array. The disk was missing from the config array
though causing a crash of libvirtd.

To fix the issue, determine the indexes separately.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1131819

https://bugzilla.redhat.com/show_bug.cgi?id=1095636

When starting up the domain the domain's NICs are allocated. As of
1f24f682 (v1.0.6) we are able to use multiqueue feature on virtio
NICs. It breaks network processing into multiple queues which can be
processed in parallel by different host CPUs. The queues are, however,
created by opening /dev/net/tun several times. Unfortunately, only the
first FD in the row is labelled so when turning the multiqueue feature
on in the guest, qemu will get AVC denial. Make sure we label all the
FDs needed.

Moreover, the default label of /dev/net/tun doesn't allow
attaching a queue:

    type=AVC msg=audit(1399622478.790:893): avc:  denied  { attach_queue }
    for  pid=7585 comm="qemu-kvm"
    scontext=system_u:system_r:svirt_t:s0:c638,c877
    tcontext=system_u:system_r:virtd_t:s0-s0:c0.c1023
    tclass=tun_socket

And as suggested by SELinux maintainers, the tun FD should be labeled
as svirt_t. Therefore, we don't need to adjust any range (as done
previously by Guannan in ae368ebf) rather set the seclabel of the
domain directly.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Instead of tediously copying of the disk source to remove it later
ensure that the media change function removes the old device after it
succeeds.

Both addition and removal of a shared hostdev share the code to generate
the hostdev key. Split it out into a separate function and refactor
them.

Removing a shared device needs special steps for disks and hostdevs.
Instead of having one function dealing this split the code into two
separate functions that can be used with better granularity.

Adding a shared device needs special steps for disks and hostdevs.
Instead of having one function dealing this split the code into two
separate functions that can be used with better granularity.

The qemuCheckSharedDevice function is operating only on disk devices.
Rename it and change the arguments to reflect that and refactor some
logic for more readability.

Split it out into a separate function and simplify the code. There's no
need to copy the entry to update it as the hash returns pointer to the
existing item.

Also remove the now unused qemuSharedDeviceEntryCopy function.

To allow reuse split the code into a separate function and refactor it.
To update an existing entry there's no need to copy it first, just
update it inplace.

Use the qemu source string formatter to format the source string
correctly for remote and other storage instead of passing source->path
blindly.

Pass the source of the changed media instead of a complete disk
definition.

Note that the @disk argument now contains what @olddisk would contain.
The new source is passed as a virStorageSource struct.