Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>

Libxl driver did not support setup additional acpi firmware to xen
guest. It is necessary to activate OEM Windows installs. This patch
allow to define in OS section acpi table param (which supported domain
common schema).
Signed-off-by: NIvan Kardykov <kardykov@tabit.pro>
[added info to docs/formatdomain.html.in]
Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>

All the 6 virGetConnect* functions in driver.c shares the
same code base. This patch creates a new static function
virGetConnectGeneric() that contains the common code to
be used with all other virGetConnect*.
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

The object locking test code is not run by any CI tests and has
bitrotted to the point where it isn't worth the effort to try to
fix it.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

When constructing QMP capabilities we allocate a dummy domain
object to pass to qemuMonitorOpen(). However, after 75dd5958
the function also expects domain definition to be allocated for
the domain object. The referenced commit already fixed
qemumonitortestutils.c but forgot to fix the other caller:
qemuProcessQMPConnectMonitor().
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

This patch adds the implementation of the ccf-assist pSeries
feature, based on the QEMU_CAPS_MACHINE_PSERIES_CAP_CCF_ASSIST
capability that was added in the previous patch.
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

Linux kernel 5.1 added a new PPC KVM capability named
KVM_PPC_CPU_CHAR_BCCTR_FLUSH_ASSIST, which is exposed to the QEMU guest
since QEMU commit 8ff43ee404d under a new sPAPR capability called
SPAPR_CAP_CCF_ASSIST. This cap indicates whether the processor supports
hardware acceleration for the count cache flush workaround, which
is a software workaround that flushes the count cache on context
switch. If the processor has this hardware acceleration, the software
flush can be shortened, resulting in performance gain.

This hardware acceleration is defaulted to 'off' in QEMU. The reason
is that earlier versions of the Power 9 processor didn't support
it (it is available on Power 9 DD2.3 and newer), and defaulting this
option to 'on' would break migration compatibility between the Power 9
processor class.

However, the user running a P9 DD2.3+ hypervisor might want to create
guests with ccf-assist=on, accepting the downside of only being able
to migrate them only between other P9 DD2.3+ hosts running upstream
kernel 5.1+, to get a performance boost.

This patch adds this new capability to Libvirt, with the name of
QEMU_CAPS_MACHINE_PSERIES_CAP_CCF_ASSIST.
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

This device is a very simple framebuffer device supported by qemu that
is mostly intended to use as a boot framebuffer in conjunction with a
vgpu. However, there is also a standalone ramfb device that can be used
as a primary display device and is useful for e.g. aarch64 guests where
different memory mappings between the host and guest can prevent use of
other devices with framebuffers such as virtio-vga.

https://bugzilla.redhat.com/show_bug.cgi?id=1679680 describes the
issues in more detail.
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>

Add a qemu capbility to see if the standalone ramfb device is available.
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>

When the bochs display type was added, the capability was never checked.
Add that check in the same place as the other video device capability
checks.
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>

This will simplify adding support for qcow2 external data_file
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

This is closer to what security_selinux.c does, and will help add
support for qcow2 external data_files
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

This mirrors the code layout in security_selinux.c. It will also make
it easier to share the checks for qcow2 external data_file support
eventually
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

The virStorageSource must have everything it needs
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

There's only one caller, so open code the file_add_path behavior
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

true is always passed here, so delete the unused code path and
adjust the associated comment
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

It is the only user. Rename it to match the local style
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

The gnulib syntax-check rules are spread across GNUmakefile, cfg.mk and
maint.mk. This made sense when we were getting two of the files from the
gnulib submodule. Now that we own all files though, we can at least
merge maint.mk and cfg.mk together. GNUmakefile can be eliminated when
we switch to meson.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

If we've marked rules as skipped, there's no sense keeping them in the
maint.mk file.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The standard maint.mk from gnulib provides alot more than just the
'syntax-check' target. This can all be purged to give a more minimal
file.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The syntax-check rules are the one bit of make usage that will
stay around for a while after the meson conversion. Move them
into the build-aux directory in preparation for refactoring
to make them independent from automake.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

We're going to be eliminating autotools and gnulib, but we still wish to
have the 'make syntax-check' functionality.

This imports the minimal set of gnulib files required to keep this
working.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

This reverts commit a5a777a8.

After previous commit the domain won't disappear while connecting
to monitor. There's no need to ref monitor config then.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

When connecting to qemu's monitor the @vm object is unlocked.
This is justified - connecting may take a long time and we don't
want to wait with the domain object locked. However, just before
the domain object is locked again, the monitor's FD is registered
in the event loop. Therefore, there is a small window where the
event loop has a chance to call a handler for an event that
occurred on the monitor FD but vm is not initalized properly just
yet (i.e. priv->mon is not set). For instance, if there's an
incoming migration, qemu creates its socket but then fails to
initialize (for various reasons, I'm reproducing this by using
hugepages but leaving the HP pool empty) then the following may
happen:

1) qemuConnectMonitor() unlocks @vm

2) qemuMonitorOpen() connects to the monitor socket and by
   calling qemuMonitorOpenInternal() which subsequently calls
   qemuMonitorRegister() the event handler is installed

3) qemu fails to initialize and exit()-s, which closes the
   monitor

4) The even loop sees EOF on the monitor and the control gets to
   qemuProcessEventHandler() which locks @vm and calls
   processMonitorEOFEvent() which then calls
   qemuMonitorLastError(priv->mon). But priv->mon is not set just
   yet.

5) qemuMonitorLastError() dereferences NULL pointer

The solution is to unlock the domain object for a shorter time
and most importantly, register event handler with domain object
locked so that any possible event processing is done only after
@vm's private data was properly initialized.

This issue is also mentioned in v4.2.0-99-ga5a777a8.

Since we are unlocking @vm and locking it back, another thread
might have destroyed the domain meanwhile. Therefore we have to
check if domain is still active, and we have to do it at the
same place where domain lock is acquired back, i.e. in
qemuMonitorOpen(). This creates a small problem for our test
suite which calls qemuMonitorOpen() directly and passes @vm which
has no definition. This makes virDomainObjIsActive() call crash.
Fortunately, allocating empty domain definition is sufficient.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

QEMU 2.11 for ppc64 changed all CPU model names to lower case. Since
libvirt can't change the model names for compatibility reasons, we need
to translate the matching lower case models to the names known by
libvirt.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This reverts commit 2d8721e2.

This fix was both incomplete and too general. It only fixed domain
startup, but libvirt would still report empty list of supported CPU
models with recent QEMU for ppc64. On the other hand, while ppc64 QEMU
ignores case when looking up CPU model names, x86_64 QEMU does case
sensitive lookup. Without reverting this patch, libvirt could happily
accept CPU model names which are not supported by QEMU.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Clang's gnu99 mode is not quite the same as GCC's. It will complain
about redefined typedefs being a C11 feature, while GCC does not
complain and allows them in gnu99 mode.
Reviewed-by: NFabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

This reverts commit 61b4e8aa.

After previous commits this is no longer needed.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1755303

With the recent work in daemon split and socket activation
daemons can come and go. They can and will be started many times
during a session which results in objects being autostarted
multiple times. This is not optimal. Use
virDriverShouldAutostart() to determine if autostart should be
done or not.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Some of objects we manage can be autostarted on libvirtd startup
(e.g. domains, network, storage pools). The idea was that when
the host is started up these objects are started too without need
of user intervention. However, with the latest daemon split and
switch to socket activated, short lived daemons (we put --timeout
120 onto each daemon's command line) this doesn't do what we want
it to. The problem is not new though, we already had the session
daemon come and go and we circumvented this problem by
documenting it (see v4.10.0-92-g61b4e8aa). But now that we meet
the same problem at all fronts it's time to deal with it.

The solution implemented in this commit is to have a file (one
per each driver) that:

  1) if doesn't exist, is created and autostart is allowed for
     given driver,

  2) if it does exist, then autostart is suppressed for given
     driver.

All the files live in a location that doesn't survive host
reboots (/var/run/ for instance) and thus the file is
automatically not there on fresh host boot.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

The comment says that the function kills domains and networks.
This is obviously not the case.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

When adding the -std=gnu99 flag, we set $wantwarn instead
of appending to it. This meant all the compiler warnings
were accidentally discarded.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

We previously got -std=gnu99 secretly enabled as a side-effect
of requesting the 'stdarg' gnulib module. We rely on some
extensions from c99/gnu99 and while RHEL-7 supports this, it
still defaults to gnu89.  RHEL-7 also supports some newer
standards but declares them experimental/incomplete, so sticking
with gnu99 is best bet for now & matches historical usage.
Reviewed-by: NFabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The 'make distcheck' target validates that a tarball builds and
is ready for release. We expect that libvirt builds cleanly on
all supported platforms, so we should be enabling -Werror when
running distcheck.

This ensures that our CI systems in turn also use -Werror.
Reviewed-by: NFabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The 'sched' module provides a sched.h header file for platforms which
lack it. We already check for the functions we need in configure, and
protect the use of sched.h where relevant, so don't need the compat
header in libvirt.
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The isatty gnulib module adds a fix for Win32 platforms where it doesn't
work correctly with character devices like NUL. This is not a compelling
enough problem for libvirt to be concerned with.
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The ldexp gnulib module adds "-lm" to the $LIBS variable if-and-only-if
the ldexp() function require linking to libm. There is no harm in
linking to libm even if it isn't required for ldexp(), so simply drop
the gnulib module.
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

We don't need to care about very old GCC versions, so implementing the
ignore_value macro directly is not a significant burden.
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>