The pciWrite32 function assembled the array of data to be written to the
fd with a bad offset on the last byte. This issue was probably caused by
a typo (14, 24).

Directly open and close PCI config file in the APIs that need it rather
than keeping the file open for the whole life of PCI device structure.

In order to be able to steal PCI device by its index in the list.

The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.

* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/;  If/.  If/

The codes were updated to allow to reset the device as long as
there is no devices/functions behind the same bus. However, the
comments were kept without touched.

Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)

  You should have received a copy of the GNU General Public License
  along with Foobar.  If not, see <http://www.gnu.org/licenses/>.

This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').

Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:

  src/security/security_selinux.h
  src/security/security_driver.h
  src/security/security_selinux.c
  src/security/security_apparmor.h
  src/security/security_apparmor.c
  src/security/security_driver.c

This removes nearly all the per-file error reporting macros
from the code in src/util/. A few custom macros remain for the
case, where the file needs to report errors with a variety of
different codes or parameters
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The code is splattered with a mix of

  sizeof foo
  sizeof (foo)
  sizeof(foo)

Standardize on sizeof(foo) and add a syntax check rule to
enforce it
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This is nearly identical to an earlier patch for virnetlink.c.

There are special stub versions of all public functions in this file
that are compiled when the platform isn't linux. Each of these
functions had an almost identical message, differing only in the
function name included in the message. Since log messages already
contain the function name, we can just define a const char* with the
common part of the string, and use that same string for all the log
messages.

If nothing else, this at least makes for less strings that need
translating...

Absence of this stub function caused a build failure on mingw32.

ATTRIBUTE_UNUSED was accidentally forgotten on one arg of a stub
function for functionality that's not present on non-linux
platforms. This causes a non-linux build with
--enable-compile-warnings=error to fail.

pciDeviceGetVirtualFunctionInfo returns pf netdevice name and virtual
function index for a given vf. This is just a wrapper around existing functions
to return vf's pf and vf_index with one api call

pciConfigAddressToSysfsfile returns the sysfile pci device link
from a 'struct pci_config_address'
Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com>

AC_CHECK_PROG checks for program in given path. However, if it doesn't
exists, [variable] is set to [value-if-not-found]. We don't want this
to be the empty string in case of 'modprobe' and 'scrub' as we want to
fallback to runtime detection.

pciTrySecondaryBusReset checks if there is active device on the
same bus, however, qemu driver doesn't maintain an effective
list for the inactive devices, and it passes meaningless argument
for parameter "inactiveDevs". e.g. (qemuPrepareHostdevPCIDevices)

if (!(pcidevs = qemuGetPciHostDeviceList(hostdevs, nhostdevs)))
    return -1;

..skipped...

if (pciResetDevice(dev, driver->activePciHostdevs, pcidevs) < 0)
    goto reattachdevs;

NB, the "pcidevs" used above are extracted from domain def, and
thus one won't be able to attach a device of which bus has other
device even detached from host (nodedev-detach). To see more
details of the problem:

RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=773667

This patch is to resolve the problem by introducing an inactive
PCI device list (just like qemu_driver->activePciHostdevs), and
the whole logic is:

  * Add the device to inactive list during nodedev-dettach
  * Remove the device from inactive list during nodedev-reattach
  * Remove the device from inactive list during attach-device
    (for non-managed device)
  * Add the device to inactive list after detach-device, only
    if the device is not managed

With the above, we have a sufficient inactive PCI device list, and thus
we can use it for pciResetDevice. e.g.(qemuPrepareHostdevPCIDevices)

if (pciResetDevice(dev, driver->activePciHostdevs,
                   driver->inactivePciHostdevs) < 0)
    goto reattachdevs;

This functions enables us to get the Virtual Functions attached to
a Physical function given the name of a SR-IOV physical functio.

In order to accomplish the task, added a getter function pciGetDeviceAddrString
to get the BDF of the Virtual Function in a char array.

To support "managed" mode of host PCI device, we record the original
states (unbind_from_stub, remove_slot, and reprobe) so that could
reattach the device to host with original driver. But there is no XML
for theses attrs, and thus after daemon is restarted, we lose the
original states. It's easy to reproduce:

    1) virsh start domain
    2) virsh attach-device dom hostpci.xml (in 'managed' mode)
    3) service libvirtd restart
    4) virsh destroy domain

    You will see the device won't be bound to the original driver
if there was one.

This patch is to solve the problem by introducing internal XML
(won't be dumped to user, only dumped to status XML). The XML is:
    <origstates>
      <unbind/>
      <remove_slot/>
      <reprobe/>
    </origstates>

Which will be child node of <hostdev><source>...</souce></hostdev>.
(only for PCI device).

A new struct "virDomainHostdevOrigStates" is introduced for the XML,
and the according members are updated when preparing the PCI device.
And function "qemuUpdateActivePciHostdevs" is modified to honor
the original states. Use of qemuGetPciHostDeviceList is removed
in function "qemuUpdateActivePciHostdevs", and the "managed" value of
the device config is honored by the change. This fixes another problem
alongside:

    qemuGetPciHostDeviceList set the device as "managed" force
    regardless of whether the device is configured as "managed='yes'"
    or not in XML, which is not right.

- changed some return 1's to return -1
- changed if (rc) error checks to if (rc < 0)
- fixed some other minor convention violations

I might have missed some. Can fix in another patch or can respin
Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com>
Reported-by: NEric Blake <eblake@redhat.com>
Reported-by: NLaine Stump <laine@laine.org>
Signed-off-by: NEric Blake <eblake@redhat.com>

Check strdup return value and fail if error
Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com>

When failing on starting a domain, it tries to reattach all the PCI
devices defined in the domain conf, regardless of whether the devices
are still used by other domain. This will cause the devices to be deleted
from the list qemu_driver->activePciHostdevs, thus the devices will be
thought as usable even if it's not true. And following commands
nodedev-{reattach,reset} will be successful.

How to reproduce:
  1) Define two domains with same PCI device defined in the confs.
  2) # virsh start domain1
  3) # virsh start domain2
  4) # virsh nodedev-reattach $pci_device

You will see the device will be reattached to host successfully.
As pciDeviceReattach just check if the device is still used by
other domain via checking if the device is in list driver->activePciHostdevs,
however, the device is deleted from the list by step 2).

This patch is to prohibit the bug by:
  1) Prohibit a domain starting or device attachment right at
     preparation period (qemuPrepareHostdevPCIDevices) if the
     device is in list driver->activePciHostdevs, which means
     it's used by other domain.

  2) Introduces a new field for struct _pciDevice, (const char *used_by),
     it will be set as the domain name at preparation period,
     (qemuPrepareHostdevPCIDevices). Thus we can prohibit deleting
     the device from driver->activePciHostdevs if it's still used by
     other domain when stopping the domain process.

* src/pci.h (define two internal functions, pciDeviceSetUsedBy and
    pciDevceGetUsedBy)
* src/pci.c (new field "const char *used_by" for struct _pciDevice,
    implementations for the two new functions)
* src/libvirt_private.syms (Add the two new internal functions)
* src/qemu_hostdev.h (Modify the definition of functions
    qemuPrepareHostdevPCIDevices, and qemuDomainReAttachHostdevDevices)
* src/qemu_hostdev.c (Prohibit preparation and don't delete the
    device from activePciHostdevs list if it's still used by other domain)
* src/qemu_hotplug.c (Update function usage, as the definitions are
    changed)
Signed-off-by: NEric Blake <eblake@redhat.com>

Leak in pciGetVirtualFunctionIndex present since commit 17d64cab.

* src/util/pci.c: fix memory leak.
Signed-off-by: NAlex Jia <ajia@redhat.com>

This patch fixes *some* compilation issues on non-Linux platforms (cygwin).

This patch adds the following helper functions:
pciDeviceIsVirtualFunction: Function to check if a pci device is a sriov VF
pciGetVirtualFunctionIndex: Function to get the VF index of a sriov VF
pciDeviceNetName: Function to get the network device name of a pci device
pciConfigAddressCompare: Function to compare pci config addresses
Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com>
Signed-off-by: NChristian Benvenuti <benve@cisco.com>
Signed-off-by: NDavid Wang <dwang2@cisco.com>
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

This patch moves some of the sriov related pci code from node_device driver
to src/util/pci.[ch]. Some functions had to go thru name and argument list
change to accommodate the move.
Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com>
Signed-off-by: NChristian Benvenuti <benve@cisco.com>
Signed-off-by: NDavid Wang <dwang2@cisco.com>

In preparation for a future patch adding new virFile APIs.

* src/util/files.h, src/util/files.c: Move...
* src/util/virfile.h, src/util/virfile.c: ...here, and rename
functions to virFile prefix.  Macro names are intentionally
left alone.
* *.c: All '#include "files.h"' uses changed.
* src/Makefile.am (UTIL_SOURCES): Reflect rename.
* cfg.mk (exclude_file_name_regexp--sc_prohibit_close): Likewise.
* src/libvirt_private.syms: Likewise.
* docs/hacking.html.in: Likewise.
* HACKING: Regenerate.

add a new API pciDeviceReAttachInit() in pci.c to initialize state values for nodedev reattach

Initialize three state value of device driver to 1. This is just for a new call to
qemudNodeDeviceReAttach()

Detected by Coverity.  Some, but not all, error paths were clean;
but they were repetitive so I refactored them.

* src/util/pci.c (pciGetDevice): Plug leak.

See previous patch for why this is good...

* src/util/pci.c (struct _pciDevice, pciGetDevice, pciFreeDevice):
Manage path dynamically.  Report snprintf overflow.
* src/util/hostusb.c (struct _usbDevice, usbGetDevice)
(usbFreeDevice): Likewise.

Seems reasonable to have all command wrappers in the same place

v2:
    Dont move SetInherit

v3:
    Comment spelling fix
    Adjust WARN0 comment
    Remove spurious #include movement
    Don't include sys/types.h
    Combine virExec enums
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Substitute VIR_ERR_NO_SUPPORT with VIR_ERR_INTERNAL_ERROR. Error
like following is not what user want to see.

error : pciDeviceIsAssignable:1487 : this function is not supported
by the connection driver: Device 0000:07:10.0 is behind a switch
lacking ACS and cannot be assigned

These VIR_XXXX0 APIs make us confused, use the non-0-suffix APIs instead.

How do these coversions works? The magic is using the gcc extension of ##.
When __VA_ARGS__ is empty, "##" will swallow the "," in "fmt," to
avoid compile error.

example: origin				after CPP
	high_level_api("%d", a_int)	low_level_api("%d", a_int)
	high_level_api("a  string")	low_level_api("a  string")

About 400 conversions.

8 special conversions:
VIR_XXXX0("") -> VIR_XXXX("msg") (avoid empty format) 2 conversions
VIR_XXXX0(string_literal_with_%) -> VIR_XXXX(%->%%) 0 conversions
VIR_XXXX0(non_string_literal) -> VIR_XXXX("%s", non_string_literal)
  (for security) 6 conversions
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>

Clang detected a null-pointer dereference regression, introduced
in commit 4e8969eb.  Without this patch, a device with
unbind_from_stub set to false would eventually try to call
virFileExists on uncomputed drvdir.

* src/util/pci.c (pciUnbindDeviceFromStub): Ensure drvdir is set
before use.

And from all related macros and functions.