* src/util/virtaudit.c (virAuditSend): one less ifdef, since gcc
does not care if an ATTRIBUTE_UNUSED var gets used in some paths.

There is no point in trying to fill params beyond the first error,
because when qemuDomainGetMemoryParameters returns -1 then the caller
cannot detect which values in params are valid.

Also exit early when nparams is 0.

To get them under the common VIR_DOMAIN_MEMORY_* prefix.

Also output the min_guarantee element when set.

The test for <vcpu> element is unrelated to vnc so the easiest fix is to
remove related configuration.

* include/libvirt/libvirt.h.in: Update comment with actual description

This sets the process name to the same value as the Windows title,
but since the name is limited to 16 chars only this is kept as a
configuration option and turned off by default
* src/qemu/qemu.conf src/qemu/qemu_conf.[ch]: hceck for support in the
  QEmu help output, add the option in qemu conf file and augment
  qemudBuildCommandLine to add it if switched on
* src/qemu/libvirtd_qemu.aug src/qemu/test_libvirtd_qemu.aug: augment
  the augeas lenses accordingly
* tests/qemuhelptest.c: cope with the extra flag being detected now

 Avoid the enforcement of direction if
- icmp rules specify the type/code information
- the 'skipMatch' variable is set to 'true'

Adds a new page for the C# language bindings being developed by Arnaud
Champion.

Debian stock kernel has CONFIG_CGROUP_MEM_RES_CTLR disabled due to the
overhead [1]. Allow to start containers if the corresponding files in
the cgroup filesystem are missing. This fixes Debian bug #566180 [2].

[1] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=534964
[2] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=566180

The libvirt_util.la library was mistakenly linked into libvirtd
directly. Since libvirt_util.la is already linked to libvirt.so,
this resulted in libvirtd getting two copies of the code and
more critically 2 copies of static global variables.

Testing in turn exposed a issue with loadable modules. The
gnulib replacement functions are not exported to loadable
modules. Rather than trying to figure out the name sof all
gnulib functions & export them, just linkage all loadable
modules against libgnu.la statically.

* daemon/Makefile.am: Remove linkage of libvirt_util.la
  and libvirt_driver.la
* src/Makefile.am: Link driver modules against libgnu.la
* src/libvirt.c: Don't try to load modules which were
  compiled out
* src/libvirt_private.syms: Export all other internal
  symbols that are required  by drivers

A more natural auditing point would perhaps be
SELinuxSetSecurityProcessLabel, but this happens in the child after root
permissions are dropped, so the kernel would refuse the audit record.

Most operations are audited at the libvirtd level; auditing in
src/libvirt.c would result in two audit entries per operation (one in
the client, one in libvirtd).

The only exception is a domain stopping of its own will (e.g. because
the user clicks on "shutdown" inside the interface).  There can often be
no client connected at the time the domain stops, so libvirtd does not
have any virConnectPtr object on which to attach an event watch.  This
patch therefore adds auditing directly inside the qemu driver (other
drivers are not supported).

Integrate with libaudit.so for auditing of important operations.
libvirtd gains a couple of config entries for auditing. By
default it will enable auditing, if its enabled on the host.
It can be configured to force exit if auditing is disabled
on the host. It will can also send audit messages via libvirt
internal logging API

Places requiring audit reporting can use the VIR_AUDIT
macro to report data. This is a no-op unless auditing is
enabled

* autobuild.sh, mingw32-libvirt.spec.in: Disable audit
  on mingw
* configure.ac: Add check for libaudit
* daemon/libvirtd.aug, daemon/libvirtd.conf,
  daemon/test_libvirtd.aug, daemon/libvirtd.c: Add config
  options to enable auditing
* include/libvirt/virterror.h, src/util/virterror.c: Add
  VIR_FROM_AUDIT source
* libvirt.spec.in: Enable audit
* src/util/virtaudit.h, src/util/virtaudit.c: Simple internal
  API for auditing messages

The statstest is xen specific. Instead of filling the code with
a huge number of #ifdef WITH_XEN, just make its entire compilation
conditional in the Makefile.am. Also ensure it links to the Xen
driver so that it builds when driver modules are enabled

* tests/Makefile.am: Make statstest xen conditional. Link to
  xen driver
* tests/Makefile.am: Remove all conditionals

* tools/virsh.pod (memtune): Drop second copy, fill to 80 columns,
enhance wording.

* src/xen/xen_driver.h (xenUnifiedDriver): Remove now-unused
domainGetMaxVcpus, domainSetVcpus.
* src/xen/proxy_internal.c (xenProxyDriver): Likewise.
* src/xen/xen_hypervisor.c (xenHypervisorDriver): Likewise.
* src/xen/xen_inotify.c (xenInotifyDriver): Likewise.
* src/xen/xend_internal.c (xenDaemonDriver)
(xenDaemonDomainSetVcpus): Likewise.
* src/xen/xm_internal.c (xenXMDriver, xenXMDomainSetVcpus):
Likewise.
* src/xen/xs_internal.c (xenStoreDriver): Likewise.

Tested with RHEL 5.6 (xendConfigVersion 2, where xend_internal
controls live domains and xm_internal controls inactive domains).
Hopefully this works with xendConfigVersion 3 (where xend_internal
controls everything).

* src/xen/xen_driver.c (xenUnifiedDomainSetVcpusFlags): Support
more flags.
(xenUnifiedGetMaxVcpus): Export.
* src/xen/xm_internal.h (xenXMDomainSetVcpusFlags): New prototype.
* src/xen/xend_internal.h (xenDaemonDomainSetVcpusFlags): Likewise.
* src/xen/xen_driver.h (xenUnifiedGetMaxVcpus): Likewise.
* src/xen/xm_internal.c (xenXMDomainSetVcpusFlags): New function.
* src/xen/xend_internal.c (xenDaemonDomainSetVcpusFlags): Likewise.

* src/xen/xen_driver.c (xenUnifiedDomainGetVcpusFlags): Support
more flags.
* src/xen/xend_internal.h (xenDaemonDomainGetVcpusFlags): New
prototype.
* src/xen/xm_internal.h (xenXMDomainGetVcpusFlags): Likewise.
* src/xen/xend_internal.c (virDomainGetVcpusFlags): New function.
* src/xen/xm_internal.c (xenXMDomainGetVcpusFlags): Likewise.

This patch series focuses on xendConfigVersion 2 (xm_internal) and 3
(xend_internal), but leaves out changes for xenapi drivers.

See this link for more details about vcpu_avail for xm usage.
http://lists.xensource.com/archives/html/xen-devel/2009-11/msg01061.html

This relies on the fact that def->maxvcpus can be at most 32 with xen.

* src/xen/xend_internal.c (xenDaemonParseSxpr)
(sexpr_to_xend_domain_info, xenDaemonFormatSxpr): Use vcpu_avail
when current vcpus is less than maximum.
* src/xen/xm_internal.c (xenXMDomainConfigParse)
(xenXMDomainConfigFormat): Likewise.
* tests/xml2sexprdata/xml2sexpr-pv-vcpus.sexpr: New file.
* tests/sexpr2xmldata/sexpr2xml-pv-vcpus.sexpr: Likewise.
* tests/sexpr2xmldata/sexpr2xml-pv-vcpus.xml: Likewise.
* tests/xmconfigdata/test-paravirt-vcpu.cfg: Likewise.
* tests/xmconfigdata/test-paravirt-vcpu.xml: Likewise.
* tests/xml2sexprtest.c (mymain): New test.
* tests/sexpr2xmltest.c (mymain): Likewise.
* tests/xmconfigtest.c (mymain): Likewise.

* src/qemu/qemu_driver.c (qemudDomainSetVcpusFlags)
(qemudDomainGetVcpusFlags): Support all feasible flag
combinations.

* src/qemu/qemu_conf.c (qemuParseCommandLineSmp): Distinguish
between vcpus and maxvcpus, for new enough qemu.
* tests/qemuargv2xmltest.c (mymain): Add new test.
* tests/qemuxml2argvtest.c (mymain): Likewise.
* tests/qemuxml2xmltest.c (mymain): Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-smp.args: New file.

* src/test/test_driver.c (testDomainGetVcpusFlags)
(testDomainSetVcpusFlags): Support all flags.
(testDomainUpdateVCPUs): Update cpu count here.

* tools/virsh.c (cmdSetvcpus): Add new flags.  Let invalid
commands through to driver, to ease testing of hypervisor argument
validation.
(cmdMaxvcpus, cmdVcpucount): New commands.
(commands): Add new commands.
* tools/virsh.pod (setvcpus, vcpucount, maxvcpus): Document new
behavior.

Although this patch adds a distinction between maximum vcpus and
current vcpus in the XML, the values should be identical for all
drivers at this point.  Only in subsequent per-driver patches will
a distinction be made.

In general, virDomainGetInfo should prefer the current vcpus.

* src/conf/domain_conf.h (_virDomainDef): Adjust vcpus to unsigned
short, to match virDomainGetInfo limit.  Add maxvcpus member.
* src/conf/domain_conf.c (virDomainDefParseXML)
(virDomainDefFormat): parse and print out vcpu details.
* src/xen/xend_internal.c (xenDaemonParseSxpr)
(xenDaemonFormatSxpr): Manage both vcpu numbers, and require them
to be equal for now.
* src/xen/xm_internal.c (xenXMDomainConfigParse)
(xenXMDomainConfigFormat): Likewise.
* src/phyp/phyp_driver.c (phypDomainDumpXML): Likewise.
* src/openvz/openvz_conf.c (openvzLoadDomains): Likewise.
* src/openvz/openvz_driver.c (openvzDomainDefineXML)
(openvzDomainCreateXML, openvzDomainSetVcpusInternal): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainDumpXML, vboxDomainDefineXML):
Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainDumpXML): Likewise.
* src/xenapi/xenapi_utils.c (createVMRecordFromXml): Likewise.
* src/esx/esx_vmx.c (esxVMX_ParseConfig, esxVMX_FormatConfig):
Likewise.
* src/qemu/qemu_conf.c (qemuBuildSmpArgStr)
(qemuParseCommandLineSmp, qemuParseCommandLine): Likewise.
* src/qemu/qemu_driver.c (qemudDomainHotplugVcpus): Likewise.
* src/opennebula/one_conf.c (xmlOneTemplate): Likewise.

Note - this wrapping is completely mechanical; the old API will
function identically, since the new API validates that the exact
same flags are provided by the old API.  On a per-driver basis,
it may make sense to have the old API pass a different set of flags,
but that should be done in the per-driver patch that implements
the full range of flag support in the new API.

* src/esx/esx_driver.c (esxDomainSetVcpus, escDomainGetMaxVpcus):
Move guts...
(esxDomainSetVcpusFlags, esxDomainGetVcpusFlags): ...to new
functions.
(esxDriver): Trivially support the new API.
* src/openvz/openvz_driver.c (openvzDomainSetVcpus)
(openvzDomainSetVcpusFlags, openvzDomainGetMaxVcpus)
(openvzDomainGetVcpusFlags, openvzDriver): Likewise.
* src/phyp/phyp_driver.c (phypDomainSetCPU)
(phypDomainSetVcpusFlags, phypGetLparCPUMAX)
(phypDomainGetVcpusFlags, phypDriver): Likewise.
* src/qemu/qemu_driver.c (qemudDomainSetVcpus)
(qemudDomainSetVcpusFlags, qemudDomainGetMaxVcpus)
(qemudDomainGetVcpusFlags, qemuDriver): Likewise.
* src/test/test_driver.c (testSetVcpus, testDomainSetVcpusFlags)
(testDomainGetMaxVcpus, testDomainGetVcpusFlags, testDriver):
Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainSetVcpus)
(vboxDomainSetVcpusFlags, virDomainGetMaxVcpus)
(virDomainGetVcpusFlags, virDriver): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainSetVcpus)
(xenUnifiedDomainSetVcpusFlags, xenUnifiedDomainGetMaxVcpus)
(xenUnifiedDomainGetVcpusFlags, xenUnifiedDriver): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainSetVcpus)
(xenapiDomainSetVcpusFlags, xenapiDomainGetMaxVcpus)
(xenapiDomainGetVcpusFlags, xenapiDriver): Likewise.
(xenapiError): New helper macro.

Done by editing the first three files, then running
'make -C src rpcgen', then editing src/remote_protocol-structs
to match.

* daemon/remote.c (remoteDispatchDomainSetVcpusFlags)
(remoteDispatchDomainGetVcpusFlags): New functions.
* src/remote/remote_driver.c (remoteDomainSetVcpusFlags)
(remoteDomainGetVcpusFlags, remote_driver): Client side
serialization.
* src/remote/remote_protocol.x
(remote_domain_set_vcpus_flags_args)
(remote_domain_get_vcpus_flags_args)
(remote_domain_get_vcpus_flags_ret)
(REMOTE_PROC_DOMAIN_SET_VCPUS_FLAGS)
(REMOTE_PROC_DOMAIN_GET_VCPUS_FLAGS): Define wire format.
* daemon/remote_dispatch_args.h: Regenerate.
* daemon/remote_dispatch_prototypes.h: Likewise.
* daemon/remote_dispatch_table.h: Likewise.
* src/remote/remote_protocol.c: Likewise.
* src/remote/remote_protocol.h: Likewise.
* src/remote_protocol-structs: Likewise.

Factors common checks (such as nonzero vcpu count) up front, but
drivers will still need to do additional flag checks.

* src/libvirt.c (virDomainSetVcpusFlags, virDomainGetVcpusFlags):
New functions.
(virDomainSetVcpus, virDomainGetMaxVcpus): Refer to new API.

* src/driver.h (virDrvDomainSetVcpusFlags)
(virDrvDomainGetVcpusFlags): New typedefs.
(_virDriver): New callback members.
* src/esx/esx_driver.c (esxDriver): Add stub for driver.
* src/lxc/lxc_driver.c (lxcDriver): Likewise.
* src/opennebula/one_driver.c (oneDriver): Likewise.
* src/openvz/openvz_driver.c (openvzDriver): Likewise.
* src/phyp/phyp_driver.c (phypDriver): Likewise.
* src/qemu/qemu_driver.c (qemuDriver): Likewise.
* src/remote/remote_driver.c (remote_driver): Likewise.
* src/test/test_driver.c (testDriver): Likewise.
* src/uml/uml_driver.c (umlDriver): Likewise.
* src/vbox/vbox_tmpl.c (Driver): Likewise.
* src/xen/xen_driver.c (xenUnifiedDriver): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDriver): Likewise.

API agreed on in
https://www.redhat.com/archives/libvir-list/2010-September/msg00456.html,
but modified for enum names to be consistent with virDomainDeviceModifyFlags.

* include/libvirt/libvirt.h.in (virDomainVcpuFlags)
(virDomainSetVcpusFlags, virDomainGetVcpusFlags): New
declarations.
* src/libvirt_public.syms: Export new symbols.

Syntax agreed on in
https://www.redhat.com/archives/libvir-list/2010-September/msg00476.html

<domain ...>
  <vcpu current='x'>y</vcpu>
...

can now be used to specify 1 <= x <= y current vcpus, in relation
to the boot-time max of y vcpus.  If current is omitted, then
current and max are assumed to be the same value.

* docs/schemas/domain.rng: Add new attribute.
* docs/formatdomain.html.in: Document it.
* tests/qemuxml2argvdata/qemuxml2argv-smp.xml: Add to
domainschematest.
* tests/xml2sexprdata/xml2sexpr-pv-vcpus.xml: Likewise.

In the table built for traffic coming from the VM going to the host make the following changes:

- don't ACCEPT the packets but do a 'RETURN' and let the host-specific firewall rules in subsequent rules evaluate whether the traffic is allowed to enter

- use the '-m state' in the rules as everywhere else

* .x-sc_po_check: Exclude docs directory.

Add src/util/files.c to libvirt_proxy_SOURCES.

ESX(i) uses UTF-8, but a Windows based GSX server writes
Windows-1252 encoded VMX files.

Add a test case to ensure that libxml2 provides Windows-1252
to UTF-8 conversion.

Since bugs due to double-closed file descriptors are difficult to track down in a multi-threaded system, I am introducing the VIR_CLOSE(fd) macro to help avoid mistakes here.

There are lots of places where close() is being used. In this patch I am only cleaning up usage of close() in src/conf where the problems were.

I also dare to declare close() as being deprecated in libvirt code base (HACKING).