Rework and simplification of teardown of the macvtap device.

Basically all devices with the same MAC address and link device are kept
alive and not attempted to be torn down. If a macvtap device linked to a
physical interface with a certain MAC address 'M' is to be created it
will automatically fail if the interface is 'up'ed and another macvtap
with the same properties (MAC addr 'M', link dev) happens to be 'up'.
This will prevent the VM from starting or the device from being attached
to a running VM. Stale interfaces are assumed to be there for some
reason and not stem from libvirt.

In the VM shutdown path, it's assuming that an interface name is always
available so that if the device type is DIRECT it can be torn down
using its name.

* src/util/macvtap.h src/libvirt_macvtap.syms: change of deleting routine
* src/util/macvtap.c: cleanups and change of deleting routine
* src/qemu/qemu_driver.c: change cleanup on shutdown
* src/qemu/qemu_conf.c: don't delete Macvtap in qemudPhysIfaceConnect()

The QEMU JSON monitor changed balloon commands to return/accept
bytes instead of kilobytes. Update libvirt to cope with this

* src/qemu/qemu_monitor_json.c: Expect/use bytes for ballooning

* src/qemu/qemu_monitor_text.c (qemuMonitorTextAddUSBDisk): Free
command output buffer.

* src/qemu/qemu_driver.c (qemuInitPasswords): Free pass-phrase buffer.

* src/qemu/qemu_monitor_text.c (qemuMonitorTextAddDevice): Free the
device name buffer.

Similar to the Set*Mem commands, this implementation was bogus and
misleading. Make it clear this is a hotplug only operation, and that the
hotplug piece isn't even implemented.

Also drop the overkill maxvcpus validation: we don't perform this check
at XML define time so clearly no one is missing it, and there is
always the risk that our info will be out of date, possibly preventing
legitimate CPU values.
Signed-off-by: NCole Robinson <crobinso@redhat.com>

SetMem and SetMaxMem are hotplug only APIs, any persistent config
changes are supposed to go via XML definition. The original implementation
of these calls were incorrect and had the nasty side effect of making
a psuedo persistent change that would be lost after libvirtd restart
(I didn't know any better).

Fix these APIs to rightly reject non running domains.
Signed-off-by: NCole Robinson <crobinso@redhat.com>

The plain QEMU tree does not include 'thread_id' in the JSON
output. Thus we need to treat it as non-fatal if missing.

* src/qemu/qemu_monitor_json.c: Treat missing thread_id as non-fatal

A typo in the check for the primary IDE controller could cause
a crash on restore depending on the exact guest config.

* src/qemu/qemu_conf.c: Fix s/video/controller/ typo & slot
  number typo

Current error reporting for JSON mode returns the full JSON
command string and full JSON error string. This is not very
user friendly, so this change makes the error report only
contain the basic command name, and friendly error message
description string. The full JSON data is logged instead.

* src/qemu/qemu_monitor_json.c: Always return the 'desc' field from
  the JSON error message to users.

When in JSON mode, QEMU requires that 'qmp_capabilities' is run as
the first command in the monitor. This is a no-op when run in the
text mode monitor

* src/qemu/qemu_driver.c: Run capabilities negotiation when
  connecting to the monitor
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add
  support for the 'qmp_capabilities' command, no-op in text mode.

This part adds support for qemu making a macvtap tap device available
via file descriptor passed to qemu command line. This also attempts to
tear down the macvtap device when a VM terminates. This includes support
for attachment and detachment to/from running VM.
* src/qemu/qemu_conf.[ch] src/qemu/qemu_driver.c: add support in the
  QEmu driver

Current PCI addresses are allocated at time of VM startup.
To make them truely persistent, it is neccessary to do this
at time of virDomainDefine/virDomainCreate. The code in
qemuStartVMDaemon still remains in order to cope with upgrades
from older libvirt releases

* src/qemu/qemu_driver.c: Rename existing qemuAssignPCIAddresses
  to qemuDetectPCIAddresses. Add new qemuAssignPCIAddresses which
  does auto-allocation upfront. Call qemuAssignPCIAddresses from
  qemuDomainDefine and qemuDomainCreate to assign PCI addresses that
  can then be persisted. Don't clear PCI addresses at shutdown if
  they are intended to be persistent

The old text mode monitor prompts for a password when disks are
encrypted. This interactive approach doesn't work for JSON mode
monitor. Thus there is a new 'block_passwd' command that can be
used.

* src/qemu/qemu_driver.c: Split out code for looking up a disk
  secret from findVolumeQcowPassphrase, into a new method
  getVolumeQcowPassphrase. Enhance qemuInitPasswords() to also
  set the disk encryption password via the monitor
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
  support for the 'block_passwd' monitor command.

Since c26cb923, the dname
parameter has been ignored by these two functions.  Use it.
* src/qemu/qemu_driver.c (qemudDomainMigratePrepareTunnel): Honor dname
parameter once again.
(qemudDomainMigratePrepare2): Likewise.

All other libvirt functions use array first and then number of elements
in that array. Let's make cpuDecode follow this rule.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NChris Lalancette <clalance@redhat.com>

With QEMU >= 0.12 the host and guest side of disks no longer have
the same naming convention. Specifically the host side will now
get a 'drive-' prefix added to its name. The 'info blockstats'
monitor command returns the host side name, so it is neccessary
to strip this off when looking up stats since libvirt stores the
guest side name !

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Move 'drive-' prefix
  string to a defined constant
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_text.c: Strip
  off 'drive-' prefix (if found) when looking up disk stats

Currently the timeout for reading startup output is 3 seconds. If the
host is under any sort of load, we can easily trigger this. Lets bump
it to 30 seconds.

Since the polling loop checks to see if the process has died, we shouldn't
erroneously hit this timeout if qemu bombs (only if it is stuck in some
infinite loop).

The timeout errors were unconditionally being overwritten by the less
helpful 'unable to start guest' error.

Use the ATTRIBUTE_NONNULL annotation to mark some virConnectPtr
args as mandatory non-null so the compiler can warn of mistakes

* src/conf/domain_event.h: All virConnectPtr args must be non-null
* src/qemu/qemu_conf.h: qemudBuildCommandLine and
  qemudNetworkIfaceConnect() must be given non-null connection
* tests/qemuxml2argvtest.c: Provide a non-null (dummy) connection to
  qemudBuildCommandLine()

The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in cpu_conf.{h,c} and update all callers to
match

The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in node_device_conf.{h,c} and update all callers to
match

All callers now pass a NULL virConnectPtr into the USB/PCi device
iterator functions. Therefore the virConnectPtr arg can now be
removed from these functions

* src/util/hostusb.h, src/util/hostusb.c: Remove virConnectPtr
  from usbDeviceFileIterate
* src/util/pci.c, src/util/pci.h: Remove virConnectPtr arg from
  pciDeviceFileIterate
* src/qemu/qemu_security_dac.c, src/security/security_selinux.c: Update
  to drop redundant virConnectPtr arg

* src/qemu/qemu_conf.c: Fix ',' vs '.' typo in floppy disk arg

The QEMU flags are commonly stored as a signed or unsigned int,
allowing only 31 flags. This limit is rather close, so to aid
future patches, change it to a 64-bit int

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c,
  tests/qemuargv2xmltest.c, tests/qemuhelptest.c, tests/qemuxml2argvtest.c:
  Use 'unsigned long long' for QEMU flags

The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in security_driver.{h,c} and update all callers to
match

The security driver was mistakenly initialized before the QEMU
config file was loaded. This prevents it being turned off again.
The capabilities XML was also getting the wrong security driver
name, due to the stacked driver arrangement.

* src/qemu/qemu_driver.c: Fix initialization order and capabilities
  model name

It was used for error reporting only.

It was used for error reporting only.

It was used for error reporting only.

It was used for error reporting only.

It was used for error reporting only.

It was used for error reporting only.