Currently the grammar uses "none" for a "valid" Disk Storage Pool
format type; however, virStoragePoolFormatDisk uses "unknown" so
virt-xml-validate will fail to validate when "unknown" is found

Commit id '887dd362' added support for a netfs pool format type 'cifs'
and 'gluster' in order to add rng support for Samba and glusterfs netfs
pools. Originally, the CIFS type support was added as part of commit
id '61fb6979'. Eventually commit id 'b325be12' fixed the gluster rng
definition to match expectations.

As it turns out the CIFS rng needed a similar change since the directory
path is not an absDirPath, rather just a dirPath will be required.

Volume and pool formatting functions took different approaches to
unspecified uids/gids.  When unknown, it is always parsed as -1, but one
of the functions formatted it as unsigned int (wrong) and one as
int (better).  Due to that, our two of our XML files from tests cannot
be parsed on 32-bit machines.

RNG schema needs to be modified as well, but because both
storagepool.rng and storagevol.rng need same schema for permission
element, save some space by moving it to storagecommon.rng.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

According to our documentation logical pool supports formats 'auto' and
'lvm2'. However, in storage_conf.c we previously defined storage pool
formats: unknown, lvm2. Due to backward compatibility reasons
we must continue refer to pool format type 'unknown' instead of 'auto'.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1123767

 - Provide an implementation for buildPool and deletePool operations
   for the ZFS storage backend.
 - Add VIR_STORAGE_POOL_SOURCE_DEVICE flag to ZFS pool poolOptions
   as now we can specify devices to build pool from
 - storagepool.rng: add an optional 'sourceinfodev' to 'sourcezfs' and
   add an optional 'target' to 'poolzfs' entity
 - Add a couple of tests to storagepoolxml2xmltest

Implement ZFS storage backend driver. Currently supported
only on FreeBSD because of ZFS limitations on Linux.

Features supported:

 - pool-start, pool-stop
 - pool-info
 - vol-list
 - vol-create / vol-delete

Pool definition looks like that:

 <pool type='zfs'>
  <name>myzfspool</name>
  <source>
    <name>actualpoolname</name>
  </source>
 </pool>

The 'actualpoolname' value is a name of the pool on the system,
such as shown by 'zpool list' command. Target makes no sense
here because volumes path is always /dev/zvol/$poolname/$volname.

User has to create a pool on his own, this driver doesn't
support pool creation currently.

A volume could be used with Qemu by adding an entry like this:

    <disk type='volume' device='disk'>
      <driver name='qemu' type='raw'/>
      <source pool='myzfspool' volume='vol5'/>
      <target dev='hdc' bus='ide'/>
    </disk>

Gluster volumes don't start with a leading slash. Our schema for netfs
gluster pools enforces it though. Luckily mount.glusterfs skips it.
Allow a slashless volume name for glusterfs netfs mounts in the schema.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1101999

Add support for a new <pool type='gluster'>, similar to
RBD and Sheepdog.  Terminology wise, a gluster volume
forms a libvirt storage pool, within the gluster volume,
individual files are treated as libvirt storage volumes.

* docs/schemas/storagepool.rng (poolgluster): New pool type.
* docs/formatstorage.html.in: Document gluster.
* docs/storage.html.in: Likewise, and contrast it with netfs.
* tests/storagepoolxml2xmlin/pool-gluster.xml: New test.
* tests/storagepoolxml2xmlout/pool-gluster.xml: Likewise.
* tests/storagepoolxml2xmltest.c (mymain): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

While trying to compare netfs against my new gluster pool, I
discovered two things:

virt-xml-validate chokes on valid xml produced by 'virsh pool-dumpxml'
[yet another reason that ALL patches that add new xml should be adding
corresponding tests]

When using glusterfs FUSE mounts, you cannot access a subdirectory
of a gluster volume.  The recommended workaround in the gluster
community is to mount the volume to an intermediate location, then
bind-mount the desired subdirectory to the final location.  Maybe
we should teach libvirt to do bind-mounting, but for now I chose to
just document the limitation.

* docs/storage.html.in: Improve documentation.
* docs/schemas/storagepool.rng (sourcefmtnetfs): Allow all
formats, and drop redundant info-vendor.
* tests/storagepoolxml2xmltest.c (mymain): New test.
* tests/storagepoolxml2xmlin/pool-netfs-gluster.xml: New file.
* tests/storagepoolxml2xmlout/pool-netfs-gluster.xml: Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

The RNG grammar did not allow arbitrary interleaving, which makes
it harder than necessary to create a new pool from handwritten XML.

* docs/schemas/storagepool.rng: Allow interleaving.
* tests/storagepoolxml2xmlin/pool-sheepdog.xml: Test interleave.
* tests/storagepoolxml2xmlin/pool-iscsi-auth.xml: Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

When using logical pools, we had to trust the target->path provided.
This parameter, however, can be completely ommited and we can use
'/dev/<source.name>' safely and populate it to target.path.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=952973

The existing 'chap' XML logic was never used - just defined.  Rather than
try to insert a square peg into a round hole, blow it up and rewrite the
logic to follow the 'ceph' format.

Remove the former "chap.login" and "chap.passwd" fields and replace
with "chap.username" and "chap.secret" in _virStoragePoolAuthChap.
Adjust the virStoragePoolDefParseAuthChap() to process.

Change the rng file to describe the new layout

Update the formatstorage.html to describe the usage of the secret element
to mention that the secret type "iscsi" and "ceph" can be used
to storage pool too.

Update the formatsecret.html to include a reference to the storage pool

Update tests to handle the changes from 'login' and 'passwd' to 'username'
and '<secret>' format

Make target path mandatory for pool types that require target,
since we refuse to parse a target without a path.

https://bugzilla.redhat.com/show_bug.cgi?id=893273

The definiton of scsi adapter in storagespool.rng (sourceinfoadapter)
can be used by scsi hostdev in later patch. Move it to basictypes.rng.

PortNumber is defined in both domaincommon.rng and storagespool.rng,
simplify it by moving it to basictypes.rng.
Signed-off-by: NHan Cheng <hanc.fnst@cn.fujitsu.com>

This introduces 4 new attributes for storage pool source adapter.
E.g.

<adapter type='fc_host' parent='scsi_host5' wwnn='20000000c9831b4b' wwpn='10000000c9831b4b'/>

Attribute 'type' can be either 'scsi_host' or 'fc_host', and defaults
to 'scsi_host' if attribute 'name' is specified. I.e. It's optional
for 'scsi_host' adapter, for back-compat reason. However, mandatory
for 'fc_host' adapter and any new future adapter types. Attribute
'parent' is to specify the parent for the fc_host adapter.

* docs/formatstorage.html.in:
  - Add documents for the 4 new attrs
* docs/schemas/storagepool.rng:
  - Add RNG schema
* src/conf/storage_conf.c:
  - Parse and format the new XMLs
* src/conf/storage_conf.h:
  - New struct virStoragePoolSourceAdapter, replace "char *adapter" with it;
  - New enum virStoragePoolSourceAdapterType
* src/libvirt_private.syms:
  - Export TypeToString and TypeFromString
* src/phyp/phyp_driver.c:
  - Replace "adapter" with "adapter.data.name", which is member of the union
    of the new struct virStoragePoolSourceAdapter now. Later patch will
    add the checking, as "adapter.data.name" is only valid for "scsi_host"
    adapter.
* src/storage/storage_backend_scsi.c:
  - Like above
* tests/storagepoolxml2xmlin/pool-scsi-type-scsi-host.xml:
* tests/storagepoolxml2xmlin/pool-scsi-type-fc-host.xml:
  - New test for 'fc_host' and "scsi_host" adapter
* tests/storagepoolxml2xmlout/pool-scsi.xml:
  - Change the expected output, as the 'type' defaults to 'scsi_host' if 'name"
    specified now
* tests/storagepoolxml2xmlout/pool-scsi-type-scsi-host.xml:
* tests/storagepoolxml2xmlout/pool-scsi-type-fc-host.xml:
  - New test
* tests/storagepoolxml2xmltest.c:
  - Include the test

iSCSI qualified names (iqn) from RFC3721 may contain colons (':'), which
neither matches the absFilePath nor genericName:

 $ virsh pool-dumpxml myiscsipool
 <pool type='iscsi'>
 ...
   <source>
 ...
     <device path='iqn.2003-01.org.linux-iscsi.phahn-sid93.x8664:sn.8a3daa0d4efd'/>
   </source>
 ...
 </pool>

Add IscsiQualifiedName type and allow its use in sourceiscsi.
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

virStrToLong(..., 8, ...) already requires the mode to be octal.
Change the relax-ng schema to check for octal as well.
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

The RE for data type "name" storagepool.rng uses is same with
"genericName" in basictypes.rng.

capability.rng: Guest features can be in any order.
nodedev.rng: Added <driver> element, <capability> phys_function and
virt_functions for PCI devices.
storagepool.rng: Owner or group ID can be -1.

schema tests: New capabilities and nodedev files; changed owner and
group to -1 in pool-dir.xml.
storage_conf: Print uid_t and gid_t as signed to storage pool XML.

This patch brings support to manage sheepdog pools and volumes to libvirt.
It uses the "collie" command-line utility that comes with sheepdog for that.

A sheepdog pool in libvirt maps to a sheepdog cluster.
It needs a host and port to connect to, which in most cases
is just going to be the default of localhost on port 7000.

A sheepdog volume in libvirt maps to a sheepdog vdi.
To create one specify the pool, a name and the capacity.
Volumes can also be resized later.

In the volume XML the vdi name has to be put into the <target><path>.
To use the volume as a disk source for virtual machines specify
the vdi name as "name" attribute of the <source>.
The host and port information from the pool are specified inside the host tag.

  <disk type='network'>
    ...
    <source protocol="sheepdog" name="vdi_name">
      <host name="localhost" port="7000"/>
    </source>
  </disk>

To work right this patch parses the output of collie,
so it relies on the raw output option. There recently was a bug which caused
size information to be reported wrong. This is fixed upstream already and
will be in the next release.
Signed-off-by: NSebastian Wiedenroth <wiedi@frubar.net>

This patch adds support for a new storage backend with RBD support.

RBD is the RADOS Block Device and is part of the Ceph distributed storage
system.

It comes in two flavours: Qemu-RBD and Kernel RBD, this storage backend only
supports Qemu-RBD, thus limiting the use of this storage driver to Qemu only.

To function this backend relies on librbd and librados being present on the
local system.

The backend also supports Cephx authentication for safe authentication with
the Ceph cluster.

For storing credentials it uses the built-in secret mechanism of libvirt.
Signed-off-by: NWido den Hollander <wido@widodh.nl>

Make it obvious to 'dumpxml' readers what unit we are using,
since our default of KiB for memory (1024) differs from qemu's
default of MiB; and differs from our use of bytes for storage.

Tests were updated via:

$ find tests/*data tests/*out -name '*.xml' | \
  xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/"
$ find tests/*data tests/*out -name '*.xml' | \
  xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/"

followed by a few fixes for the stragglers.

Note that with this patch, the RNG for <memory> still forbids
validation of anything except unit='KiB', since the code silently
ignores the attribute; a later patch will expand <memory> to allow
scaled input in the code and update the RNG to match.

* docs/schemas/basictypes.rng (unit): Add 'bytes'.
(scaledInteger): New define.
* docs/schemas/storagevol.rng (sizing): Use it.
* docs/schemas/storagepool.rng (sizing): Likewise.
* docs/schemas/domaincommon.rng (memoryKBElement): New define; use
for memory elements.
* src/conf/storage_conf.c (virStoragePoolDefFormat)
(virStorageVolDefFormat): Likewise.
* src/conf/domain_conf.h (_virDomainDef): Document unit used
internally.
* src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef):
Likewise.
* tests/*data/*.xml: Update all tests.
* tests/*out/*.xml: Likewise.
* tests/define-dev-segfault: Likewise.
* tests/openvzutilstest.c (testReadNetworkConf): Likewise.
* tests/qemuargv2xmltest.c (blankProblemElements): Likewise.

The code supported unit='E' for "exabyte", but the RNG did not;
conversely, the RNG supported "z" and "y" but the code did not
(I'm jealous if you have that much storage, particularly since
it won't fit in 64-bit off_t).  Also, the code supported
<allocation unit='...'>, but not the RNG.

In an effort to make 'unit' more worthwhile in future patches,
it's easier to share it between files.

In making this factorization, note that absFilePath is more
permissive than 'path', so storage pools and storage volumes
will now validate with a wider set of file names than before.
I don't think this should be a problem in practice.

* docs/schemas/storagepool.rng: Include basic types, rather than
repeating things here.
* docs/schemas/storagevol.rng: Likewise.
* docs/schemas/basictypes.rng: Add 'unsignedLong', 'unit', and fix
to match storage code.

The XML docs describe a 'port' attribute for the
storage source <host> element, but the parser never
handled it.

* docs/schemas/storagepool.rng: Define port attribute
* src/conf/storage_conf.c: Add missing parsing/formatting
  of host port number
* src/conf/storage_conf.h: Remove bogus/unused 'protocol' field

I wrote a patch to add support for listing the Vendor and Model of a
storage pool in the storage pool XML.  This would allow vendor
extensions of specific devices.  The patch includes a test for the new
attributes as well.

Patrick Dignan

* Fix broken rng schema
* Add test input & output files

* docs/schemas/capability.rng: Likewise.
* docs/schemas/network.rng: Likewise.
* docs/schemas/nodedev.rng: Likewise.
* docs/schemas/storagepool.rng: Likewise.
* docs/schemas/storagevol.rng: Likewise.
Use these commands:
t=$'\t'
git ls-files | grep '\.rng$' | xargs grep -lE "^ *$t" \
  | xargs perl -MText::Tabs -ni -le \
    '$m=/^( *\t[ \t]*)(.*)/; print $m ? expand($1) . $2 : $_'

Allows the initiator to use a variety of IQNs rather than just the
system IQN when creating iSCSI pools.
* docs/schemas/storagepool.rng: extends the syntax with <iqn name="..."/>
* src/conf/storage_conf.[ch]: read and stores the iqn name
* src/storage/storage_backend_iscsi.[ch]: implement the IQN selection
  when detected

* src/conf/storage_conf.c src/conf/storage_conf.h: extend the enums
  and values
* docs/schemas/storagepool.rng: add to the list of storage pool type
  formats

- mpath pools weren't listed
- scsi pools were missing an adapter section
- iscsi pools were missing an auth section
- Logical pools do not require a source name to be specified

* docs/schemas/*.rng: the comments were wrong
* src/qemu_conf.c: typo in an error message