Rather than open code build the drive alias command in multiple places,
use the helper to ensure consistency.

Since we already have a function that will generate the drivestr from
the alias, let's use it and remove the qemuDeviceDriveHostAlias.

Move the QEMU_DRIVE_HOST_PREFIX definition into qemu_alias.h

Also alter qemuAliasFromDisk to use the QEMU_DRIVE_HOST_PREFIX instead
of "drive-%s".

Modify the error/exit path to match what was done for Virtio and SCSI.
If nothing else it'll have a consistent look'n'feel

The current LUKS support has a "luks" volume type which has
a "luks" encryption format.

This partially makes sense if you consider the QEMU shorthand
syntax only requires you to specify a format=luks, and it'll
automagically uses "raw" as the next level driver. QEMU will
however let you override the "raw" with any other driver it
supports (vmdk, qcow, rbd, iscsi, etc, etc)

IOW the intention though is that the "luks" encryption format
is applied to all disk formats (whether raw, qcow2, rbd, gluster
or whatever). As such it doesn't make much sense for libvirt
to say the volume type is "luks" - we should be saying that it
is a "raw" file, but with "luks" encryption applied.

IOW, when creating a storage volume we should use this XML

  <volume>
    <name>demo.raw</name>
    <capacity>5368709120</capacity>
    <target>
      <format type='raw'/>
      <encryption format='luks'>
        <secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
      </encryption>
    </target>
  </volume>

and when configuring a guest disk we should use

  <disk type='file' device='disk'>
    <driver name='qemu' type='raw'/>
    <source file='/home/berrange/VirtualMachines/demo.raw'/>
    <target dev='sda' bus='scsi'/>
    <encryption format='luks'>
      <secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
    </encryption>
  </disk>

This commit thus removes the "luks" storage volume type added
in

  commit 318ebb36
  Author: John Ferlan <jferlan@redhat.com>
  Date:   Tue Jun 21 12:59:54 2016 -0400

    util: Add 'luks' to the FileTypeInfo

The storage file probing code is modified so that it can probe
the actual encryption formats explicitly, rather than merely
probing existance of encryption and letting the storage driver
guess the format.

The rest of the code is then adapted to deal with
VIR_STORAGE_FILE_RAW w/ VIR_STORAGE_ENCRYPTION_FORMAT_LUKS
instead of just VIR_STORAGE_FILE_LUKS.

The commit mentioned above was included in libvirt v2.0.0.
So when querying volume XML this will be a change in behaviour
vs the 2.0.0 release - it'll report 'raw' instead of 'luks'
for the volume format, but still report 'luks' for encryption
format.  I think this change is OK because the storage driver
did not include any support for creating volumes, nor starting
guets with luks volumes in v2.0.0 - that only since then.
Clearly if we change this we must do it before v2.1.0 though.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Dropping the caching of ccw address set.
Instead of using the cached address set, functions in qemu_hotplug.c
now recalculate it on demand.

Dropping the caching of virtio serial address set.
Instead of using the cached address set, a function in qemu_hotplug.c
now recalculates it on demand.

Credit goes to Cole Robinson.

Since return code is checked globally at the end of the function, let's
make sure that we set it correctly at any point.

This fixes a regression introduced in commit 0aa19f35 where the first
command to eject changeable media would fail unconditionally.
Signed-off-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>

USB disks, redirected devices, host devices and serial devices
are supported.

A post push realization that the boolean should be set inside the condition

A post push realization that the setting of the boolean needed to be
inside the if condition.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1301021

Generate the luks command line using the AES secret key to encrypt the
luks secret. A luks secret object will be in addition to a an AES secret.

For hotplug, check if the encinfo exists and if so, add the AES secret
for the passphrase for the secret object used to decrypt the device.

Modify/augment the fakeSecret* in qemuxml2argvtest in order to handle
find a uuid or a volume usage with a specific path prefix in the XML
(corresponds to the already generated XML tests). Add error message
when the 'usageID' is not 'mycluster_myname'. Commit id '1d632c39'
altered the error message generation to rely on the errors from the
secret_driver (or it's faked replacement).

Add the .args output for adding the LUKS disk to the domain
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Soon we will be adding luks encryption support. Since a volume could require
both a luks secret and a secret to give to the server to use of the device,
alter the alias generation to create a slightly different alias so that
we don't have two objects with the same alias.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Commit id 'a1344f70' added AES secret processing for RBD when starting
up a guest. As such, when the hotplug code calls qemuDomainSecretDiskPrepare
an AES secret could be added to the disk about to be hotplugged. If an AES
secret was added, then the hotplug code would need to generate the secret
object because qemuBuildDriveStr would add the "password-secret=" to the
returned 'driveStr' rather than the base64 encoded password.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

A recent adjustment to qemuDomainAttachRNGDevice to properly cleanup
the props object after a qemuMonitorAddObject also would affect this
code. Alter the cleanup to be similar to RNG changes.

Based on recent review comment - rather than have a spate of goto failxxxx,
change to a boolean based model. Ensures that the original error can be
preserved and cleanup is a bit more orderly if more objects are added.

Based on recent review comment - rather than have a spate of goto failxxxx,
change to a boolean based model. Ensures that the original error can be
preserved and cleanup is a bit more orderly if more objects are added.

Based on recent review comment - rather than have a spate of goto failxxxx,
change to a boolean based model. Ensures that the original error can be
preserved and cleanup is a bit more orderly if more objects are added.

Based on recent review comment - rather than have a spate of goto failxxxx,
change to a boolean based model. Ensures that the original error can be
preserved and cleanup is a bit more orderly if more objects are added.

Based on recent review comment - rather than have a spate of goto failxxxx,
change to a boolean based model. Ensures that the original error can be
preserved and cleanup is a bit more orderly if more objects are added.

A device with an attribute 'model', with just one model
so far:

<devices>
  ...
  <iommu model='intel'/>
</devices>

https://bugzilla.redhat.com/show_bug.cgi?id=1235580

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Ensure that the given controller and all controllers with a smaller
index exist; there must not be any missing index in between.
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>
Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>

The commit "qemu: hot-plug: Assume support for -device in
qemuDomainAttachSCSIDisk" dropped the code for the automatic SCSI
controller creation used in SCSI disk hot-plugging. If we are
hot-plugging a SCSI disk to a domain and there is no proper SCSI
controller defined, it results in an "error: internal error: Could not
find scsi controller with index X required for device" error.

For that reason reverting a hunk of the commit
d4d32005.

This patch also adds an extra comment to the code to clarify the
loop.
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>
Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>

CVE-2016-5008

Setting an empty graphics password is documented as a way to disable
VNC/SPICE access, but QEMU does not always behaves like that. VNC would
happily accept the empty password. Let's enforce the behavior by setting
password expiration to "now".

https://bugzilla.redhat.com/show_bug.cgi?id=1180092Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

When support for <interface type='ethernet'> was added in commit
9a4b705f back in 2010, it erroneously looked at <source dev='blah'/>
for a user-specified guest-side interface name. This was never
documented though. (that attribute already existed at the time in the
data.ethernet union member of virDomainNetDef, but apparently had no
practical use - it was only used as a storage place for a NetDef's
bridge name during qemuDomainXMLToNative(), but even then that was
never used for anything).

When support for similar guest-side device naming was added to the lxc
driver several years later, it was put in a new subelement <guest
dev='blah'/>.

In the intervening years, since there was no validation that
ethernet.dev was NULL in the other drivers that didn't actually use
it, innocent souls who were adding other features assuming they needed
to account for non-NULL ethernet.dev when really they didn't, so
little bits of the usual pointless cargo-cult code showed up.

This patch not only switches the openvz driver to use the documented
<guest dev='blah'/> notation for naming the guest-side device (just in
case anyone is still using the openvz driver), and logs an error if
anyone tries to set <source dev='blah'/> for a type='ethernet'
interface, it also removes the cargo-cult uses of ethernet.dev and
<source dev='blah'/>, and eliminates if from the RNG and from
virDomainNetDef.

NB: I decided on this course of action after mentioning the
inconsistency here:

  https://www.redhat.com/archives/libvir-list/2016-May/msg02038.html

and getting encouragement do eliminate it in a later IRC discussion
with danpb.

Commit 409de00e changed the logic to only match PCI devices
while moving this before Remove*HostDevice calls.

https://bugzilla.redhat.com/show_bug.cgi?id=1342874

qemuDomainDiskBlockJobIsActive already checks if a disk has a
blockjob, and if so, raises an error

Refactor the error paths for attaching char device (it's about to be
more complicated).
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Since commit 71408079, qemu agent
channel cannot be plugged in because we won't generate its path
automatically.  Let's not only fix that, but also add tests for it so
next time it's checked for.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1322210Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Hand-entering indexes for 20 PCI controllers is not as tedious as
manually determining and entering their PCI addresses, but it's still
annoying, and the algorithm for determining the proper index is
incredibly simple (in all cases except one) - just pick the lowest
unused index.

The one exception is USB2 controllers because multiple controllers in
the same group have the same index. For these we look to see if 1) the
most recently added USB controller is also a USB2 controller, and 2)
the group *that* controller belongs to doesn't yet have a controller
of the exact model we're just now adding - if both are true, the new
controller gets the same index, but in all other cases we just assign
the lowest unused index.

With this patch in place and combined with the automatic PCI address
assignment, we can define a PCIe switch with several ports like this:

  <controller type='pci' model='pcie-root-port'/>
  <controller type='pci' model='pcie-switch-upstream-port'/>
  <controller type='pci' model='pcie-switch-downstream-port'/>
  <controller type='pci' model='pcie-switch-downstream-port'/>
  <controller type='pci' model='pcie-switch-downstream-port'/>
  <controller type='pci' model='pcie-switch-downstream-port'/>
  <controller type='pci' model='pcie-switch-downstream-port'/>
  ...

These will each get a unique index, and PCI addresses that connect
them together appropriately with no pesky numbers required.

Signed-off-by: NShivaprasad G Bhat <sbhat@linux.vnet.ibm.com>

Use the detected tray presence flag to trigger the tray waiting code
only if the given storage device in qemu reports to have a tray.

This is necessary as the floppy device lost it's tray as of qemu commit:

commit abb3e55b5b718d6392441f56ba0729a62105ac56
Author: Max Reitz <mreitz@redhat.com>
Date:   Fri Jan 29 20:49:12 2016 +0100

    Revert "hw/block/fdc: Implement tray status"

Commit 1fad65d4 used a really big hammer
and overwrote the error message that might be reported by qemu if the
tray is locked. Fix it by reporting the error only if no error is
currently set.

Error after commit mentioned above:
error: internal error: timed out waiting for disk tray status update

New error:
error: internal error: unable to execute QEMU command 'eject': Tray of
device 'drive-ide0-0-0' is not open

The code grew rather convoluted. Extract it to a separate function.

Move it to a more sane place since it's refreshing data about disks.

We have been always setting the capability on if qemu has
QEMU_CAPS_DEVICE.

Remove more checks that are no longer necessary.