* .gnulib: Update, for sc_prohibit_strcmp fix.
* cfg.mk: Adjust copyright; the only FSF portions come from when
this file was copied from coreutils.
(sc_prohibit_strncmp): Copy bug-fixes from sc_prohibit_strcmp.
* .x-sc_prohibit_strcmp: Delete, now that rule is smarter.
* .x-sc_prohibit_strncmp: Likewise.
* Makefile.am (syntax_check_exceptions): Track deletion.

This opens up the possibility of reusing the smaller ChrSourceDef
for both qemu monitor and a passthrough smartcard device.

* src/conf/domain_conf.h (_virDomainChrDef): Factor host
details...
(_virDomainChrSourceDef): ...into new struct.
(virDomainChrSourceDefFree): New prototype.
* src/conf/domain_conf.c (virDomainChrDefFree)
(virDomainChrDefParseXML, virDomainChrDefFormat): Split...
(virDomainChrSourceDefClear, virDomainChrSourceDefFree)
(virDomainChrSourceDefParseXML, virDomainChrSourceDefFormat):
...into new functions.
(virDomainChrDefParseTargetXML): Update clients to reflect type
split.
* src/vmx/vmx.c (virVMXParseSerial, virVMXParseParallel)
(virVMXFormatSerial, virVMXFormatParallel): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainOpenConsole): Likewise.
* src/xen/xend_internal.c (xenDaemonParseSxprChar)
(xenDaemonFormatSxprChr): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainDumpXML, vboxAttachSerial)
(vboxAttachParallel): Likewise.
* src/security/security_dac.c (virSecurityDACSetChardevLabel)
(virSecurityDACSetChardevCallback)
(virSecurityDACRestoreChardevLabel)
(virSecurityDACRestoreChardevCallback): Likewise.
* src/security/security_selinux.c (SELinuxSetSecurityChardevLabel)
(SELinuxSetSecurityChardevCallback)
(SELinuxRestoreSecurityChardevLabel)
(SELinuxSetSecurityChardevCallback): Likewise.
* src/security/virt-aa-helper.c (get_files): Likewise.
* src/lxc/lxc_driver.c (lxcVmStart, lxcDomainOpenConsole):
Likewise.
* src/uml/uml_conf.c (umlBuildCommandLineChr): Likewise.
* src/uml/uml_driver.c (umlIdentifyOneChrPTY, umlIdentifyChrPTY)
(umlDomainOpenConsole): Likewise.
* src/qemu/qemu_command.c (qemuBuildChrChardevStr)
(qemuBuildChrArgStr, qemuBuildCommandLine)
(qemuParseCommandLineChr): Likewise.
* src/qemu/qemu_domain.c (qemuDomainObjPrivateXMLFormat)
(qemuDomainObjPrivateXMLParse): Likewise.
* src/qemu/qemu_cgroup.c (qemuSetupChardevCgroup): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainAttachNetDevice): Likewise.
* src/qemu/qemu_driver.c (qemudFindCharDevicePTYsMonitor)
(qemudFindCharDevicePTYs, qemuPrepareChardevDevice)
(qemuPrepareMonitorChr, qemudShutdownVMDaemon)
(qemuDomainOpenConsole): Likewise.
* src/qemu/qemu_command.h (qemuBuildChrChardevStr)
(qemuBuildChrArgStr): Delete, now that they are static.
* src/libvirt_private.syms (domain_conf.h): New exports.
* cfg.mk (useless_free_options): Update list.
* tests/qemuxml2argvtest.c (testCompareXMLToArgvFiles): Update
tests.

* src/util/threadpool.c, src/util/threadpool.h: Thread pool
  implementation
* src/Makefile.am: Build thread pool
* src/libvirt_private.syms: Export public functions

This introduces a new set of APIs in src/util/command.h
to use for invoking commands. This is intended to replace
all current usage of virRun and virExec variants, with a
more flexible and less error prone API.

* src/util/command.c: New file.
* src/util/command.h: New header.
* src/Makefile.am (UTIL_SOURCES): Build it.
* src/libvirt_private.syms: Export symbols internally.
* tests/commandtest.c: New test.
* tests/Makefile.am (check_PROGRAMS): Run it.
* tests/commandhelper.c: Auxiliary program.
* tests/commanddata/test2.log - test15.log: New expected outputs.
* cfg.mk (useless_free_options): Add virCommandFree.
(msg_gen_function): Add virCommandError.
* po/POTFILES.in: New translation.
* .x-sc_avoid_write: Add exemption.
* tests/.gitignore: Ignore new built file.

* src/util/util.h (virVasprintf): New declaration.
* src/util/util.c (virVasprintf): New function.
(virAsprintf): Use it.
* src/util/virtaudit.c (virAuditSend): Likewise.
* src/libvirt_private.syms: Export it.
* cfg.mk (sc_prohibit_asprintf): Also prohibit vasprintf.
* .x-sc_prohibit_asprintf: Add exemption.

* cfg.mk (VC_LIST_ALWAYS_EXCLUDE_REGEX): Permanently exempt
docs/news.html.in from all future syntax checks.

Making this change makes it easier to spot the memory leaks
that will be fixed in the next patch.

* cfg.mk (sc_prohibit_xmlGetProp): New rule.
* .x-sc_prohibit_xmlGetProp: New exception.
* Makefile.am (EXTRA_DIST): Ship exception file.
* tools/virsh.c (cmdDetachInterface, cmdDetachDisk): Adjust
offenders.
* src/conf/storage_conf.c (virStoragePoolDefParseSource):
Likewise.
* src/conf/network_conf.c (virNetworkDHCPRangeDefParseXML)
(virNetworkIPParseXML): Likewise.

* Makefile.am (EXTRA_DIST): Factor exceptions files...
(syntax_check_excpetions): into new list.  Include recently added
exceptions.
* cfg.mk (sc_x_sc_dist_check): New check, copied from coreutils.

* cfg.mk (sc_prohibit_close): New syntax-check rule.
* src/util/pci.c (pciWaitForDeviceCleanup): Fix violation.
* .x-sc_prohibit_close: New exceptions.
* Makefile.am (EXTRA_DIST): Distribute new file.

Using 'int ret = strcmp(a, b)' in a qsort function is a valid use of
str[n]cmp that should _not_ be turned to STREQ, but it was falling
foul of our specific syntax-check.  Meanwhile, gnulib's maint.mk
already has a tighter bound for strcmp, so we can copy that regex and
just check for strncmp, which results in fewer false positives that
require exceptions.

* cfg.mk (sc_prohibit_strcmp_and_strncmp): Rename...
(sc_prohibit_strncmp): ...to this, and tighten, to mirror
maint.mk's sc_prohibit_strcmp's better regex.
* Makefile.am (syntax_check_exceptions): Update exception rule.
* .x-sc_prohibit_strcmp_and_strncmp: Rename...
* .x-sc_prohibit_strncmp: ...and trim.

* cfg.mk (sc_prohibit_sprintf): New rule.
(sc_prohibit_asprintf): Avoid false positives.
* docs/hacking.html.in (Printf-style functions): Document the
policy.
* HACKING: Regenerate.
* .x-sc_prohibit_sprintf: New exemptions.
* Makefile.am (syntax_check_exceptions): Ship new file.
* src/vbox/vbox_tmpl.c (vboxStartMachine, vboxAttachUSB): Use
virAsprintf instead.
* src/uml/uml_driver.c (umlOpenMonitor): Use snprintf instead.
* tools/virsh.c (cmdDetachInterface): Likewise.
* src/security/security_selinux.c (SELinuxGenSecurityLabel):
Likewise.
* src/openvz/openvz_driver.c (openvzDomainDefineCmd): Likewise,
and ensure large enough buffer.

These messages are visible to the user, so they should be
consistently translated.

* cfg.mk (msg_gen_function): Add vah_error, vah_warning.
* src/security/virt-aa-helper.c: Translate messages.
(catchXMLError): Fix capitalization.

Suggested by danpb, as it's not up-to-date anymore and
lacks many functions that were added to libvirtd.

* cfg.mk (sc_prohibit_trailing_blank_lines): Delete; this is
adequately covered by maint.mk's sc_prohibit_empty_lines_at_EOF.
* .x-sc_prohibit_empty_lines_at_EOF: New file, to exempt raw
patches.
* Makefile.am (EXTRA_DIST): Include new exemption.

There has been a frequent complaint of:

make[2]: Entering directory `/home/remote/eblake/libvirt/po'
make[2]: *** No rule to make target `/config.status', needed by `Makefile'.  Stop.

It happens after nuking and regenerating the po directory,
which is a common action after running anything like
'make dist' or 'make rpm' that dirties all the .po files.

Teach autogen.sh that it must regenerate po/Makevars to avoid
the missing variable declaration, and teach cfg.mk to recognize
that a nuked po directory is cause to rerun autogen.sh.

* cfg.mk (_update_required): Check for po/Makevars.
* autogen.sh (bootstrap): Run bootstrap if it got lost.
Diagnosed by Justin Clift.

Since we are adding a new "per-hypervisor" protocol, we
make it so that the qemu remote protocol uses a new
PROTOCOL and PROGRAM number.  This allows us to easily
distinguish it from the normal REMOTE protocol.

This necessitates changing the proc in remote_message_header
from a "remote_procedure" to an "unsigned", which should
be the same size (and thus preserve the on-wire protocol).

Changes since v1:
 - Fixed up a couple of script problems in remote_generate_stubs.pl
 - Switch an int flag to a bool in dispatch.c

Changes since v2:
 - None

Changes since v3:
 - Change unsigned proc to signed proc, to conform to spec
Signed-off-by: NChris Lalancette <clalance@redhat.com>

* cfg.mk (sc_check_author_list): Look in correct location.

* cfg.mk (sc_check_AUTHOR_list): New rule.
* .mailmap: New file, to tell git log how to map email addresses.

V2:
  - Move bitmap impl to src/util/bitmap.[ch]
  - Use CHAR_BIT instead of explicit '8'
  - Use size_t instead of unsigned int
  - Fix calculation of bitmap size in virBitmapAlloc
  - Ensure bit is within range of map in the set, clear, and get
    operations
  - Use bool in virBitmapGetBit
  - Add virBitmapFree to free-like funcs in cfg.mk

V3:
  - Check for overflow in virBitmapAlloc
  - Fix copy and paste bug in virBitmapAlloc
  - Use size_t in prototypes
  - Add ATTRIBUTE_NONNULL in prototypes where appropriate
    and remove NULL check from impl

V4:
  - Add ATTRIBUTE_RETURN_CHECK in prototypes where appropriate.

* cfg.mk (sc_prohibit_gettext_markup): Just like VIR_WARN*.

* cfg.mk (msg_gen_function): Add VIR_ERROR and VIR_ERROR0,
so that sc_libvirt_unmarked_diagnostics will check them, too.

* cfg.mk (sc_prohibit_newline_at_end_of_diagnostic): New rule.
Idea proposed by Jiri Denemark.

* cfg.mk (sc_prohibit_gettext_markup): New rule, to enforce
this policy.  Contrary to most diagnostic-emitting functions,
where we require _(...) markup, here, we require that _() *not*
be used for certain functions (or function-like macros).

* cfg.mk (useless_free_options): Add many vir*Free* function names,
and then remove the useless if-before-free tests exposed by running
make syntax-check.
* src/conf/interface_conf.c (virInterfaceDefFree): Remove useless "if".
(virInterfaceAssignDef): Likewise.
* src/conf/network_conf.c (virNetworkAssignDef): Likewise.
* src/conf/storage_conf.c (virStoragePoolObjAssignDef): Likewise.
* src/node_device/node_device_hal.c (dev_create): Likewise.
* src/security/virt-aa-helper.c (vahDeinit): Likewise.
* src/test/test_driver.c (testNodeDeviceCreateXML): Likewise.
* src/util/conf.c (virConfSetValue): Likewise.

This makes the useless-if-before-free test in maint.mk spot
uses of virCgroupFree just like it does for free and the other
listed functions.
* cfg.mk (useless_free_options): Add virCgroupFree.
Prompted by suggestion from Eric Blake.

Some shells warn about missing programs before redirection;
the idiomatic way to silence them is to run the program check
inside a subshell, with the redirections outside the subshell.
But a subshell is only needed in places where it is reasonable
to expect the use of such a noisy shell in the first place.

* src/Makefile.am (remote_protocol-structs): Use subshell, for
FreeBSD 8.0 /bin/sh.
* cfg.mk (sc_preprocessor_indentation): Avoid subshell, since the
only users running cfg.mk can be assumed to have decent tools.

* cfg.mk (gnulib_srcdir): Override maint.mk default.
(_update_required): Run in correct directory.

Noticed because virt-pki-validate was very inconsistent on
using tabs vs. 8 spaces, sometimes mixing both paradigms on
a single line.

'git diff -b' shows significant changes only in cfg.mk.

* cfg.mk (sc_TAB_in_indentation): Add a few files.
* daemon/libvirtd.init.in: Avoid tabs.
* tools/virt-pki-validate.in: Likewise.

* .gitignore: Add exemption.
* cfg.mk (local-checks-to-skip): Ignore a test to silence a skip
warning.

Remove symbols that don't exist anymore (e.g. ERROR0) or aren't
message generating functions (e.g. VIR_FREE) or are now reported
as unmarked because the grep command is different, but that should
not be marked at all (e.g. DEBUG0).

Also don't restrict one of the grep lines in the
libvirt_unmarked_diagnostics rule to match exactly one space
between function name and opening parenthesis.

Also unify error/errorf to remoteError and update cfg.mk accordingly.

Tested by running 'git submodule foreach git pull origin master' and
'git add .gnulib', then seeing that 'make clean' skips autogen
although 'make' properly runs it.

* cfg.mk (_clean_requested): New check, to speed up 'make clean'
even if gnulib submodule is outdated.
Suggested by Daniel P. Berrange.

Also rename ReportError to macvtapError.

Also define ESX_ERROR and ESX_VI_ERROR in a central place, instead of
defining them in each source file.

Add ESX_ERROR and ESX_VI_ERROR to the msg_gen_function list in cfg.mk.

Update po/POTFILES.in accordingly.

Add vboxError to the msg_gen_function list in cfg.mk.

* Since the file pattern matches RNG schemas as well as C sources, the error message should mention both.

git reset --hard 96e5a2d4
./autogen.sh
make -s
git pull
make -s    <-- expecting auto-bootstrap here, doesn't happen

Use git diff to expose whether the submodule has untracked changes,
which are typical on an incremental pull if .gnulib was updated but
the user did not manually run 'git submodule update'.

After this patch is applied, I encountered a new problem when
following the reproducing pattern.  Basically, the change to .gnulib
between libvirt's commit 96e5a2d4 and this patch introduced a change
to sys_ioctl.in.h, but gnulib (intentionally) does not make the
replacement headers depend on Makefile changes.  Therefore, I ended up
with the generated replacement header being broken:
gnulib/lib/sys/ioctl.h complained about a use of @.  But that seems
like something that should be fixed upstream in gnulib's bootstrap
script (that is, when doing a gnulib update, all files created from
.in.h file should probably be deleted).  Without the benefit of that
proposed gnulib fix, I worked around the problem by manually removing
the stale gnulib/lib/sys/ioctl.h.

* autogen.sh (t): Also run bootstrap if the gnulib submodule needs
to be updated.
* cfg.mk (_autogen): Likewise.
Reported by Matthias Bolte.