The network address was being set to 192.168.122.0 instead
of 192.168.122.0/24. Fix this by removing the unneccessary
'network' field from virNetworkDef and just pass the
network address and netmask into the iptables APIs directly.

* src/conf/network_conf.h, src/conf/network_conf.c: Remove
  the 'network' field from virNEtworkDef.
* src/network/bridge_driver.c: Update for iptables API changes
* src/util/iptables.c, src/util/iptables.h: Require the
  network address + netmask pair to be passed in

Instead of storing the IP address string in virNetwork related
structs, store the parsed virSocketAddr. This will make it
easier to add IPv6 support in the future, by letting driver
code directly check what address family is present

* src/conf/network_conf.c, src/conf/network_conf.h,
  src/network/bridge_driver.c: Convert to use virSocketAddr
  in virNetwork, instead of char *.
* src/util/bridge.c, src/util/bridge.h,
  src/util/dnsmasq.c, src/util/dnsmasq.h,
  src/util/iptables.c, src/util/iptables.h: Convert to
  take a virSocketAddr instead of char * for any IP
  address parameters
* src/util/network.h: Add macros to determine if an address
  is set, and what address family is set.

The network driver is not doing correct checking for
duplicate UUID/name values. This introduces a new method
virNetworkObjIsDuplicate, based on the previously
written virDomainObjIsDuplicate.

* src/conf/network_conf.c, src/conf/network_conf.c,
  src/libvirt_private.syms: Add virNetworkObjIsDuplicate,
* src/network/bridge_driver.c: Call virNetworkObjIsDuplicate
  for checking uniqueness of uuid/names

* global: patch created by running:
for f in $(git ls-files '*.[ch]') ; do
    cppi $f > $f.t && mv $f.t $f
done

The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in network_conf.{h,c} and update all callers to
match

The 'int virInterfaceIsActive()' method was directly returning the
value of the 'int active:1' bitfield in virIntefaceDefPtr. A bitfield
with a signed integer, will hold the values 0 and -1, not 0 and +1
as might be expected. This meant that virInterfaceIsActive() was
always returning -1 when the interface was active, not +1 & thus all
callers thought an error had occurred. To protect against this kind
of mistake again, change all bitfields to be unsigned ints

* daemon/libvirtd.h, src/conf/domain_conf.h, src/conf/interface_conf.h,
  src/conf/network_conf.h: Change bitfields to unsigned int.

* src/conf/network_conf.h: extend the structure to store the range
* src/conf/network_conf.c: before adding a range parse the IP addresses
  do some checking and keep the size

Rename virDomainIsActive to virDomainObjIsActive, and
virInterfaceIsActive to virInterfaceObjIsActive and finally
virNetworkIsActive to virNetworkObjIsActive.

* src/conf/domain_conf.c, src/conf/domain_conf.h,
  src/conf/interface_conf.h, src/conf/network_conf.c,
  src/conf/network_conf.h, src/lxc/lxc_driver.c,
  src/network/bridge_driver.c, src/opennebula/one_driver.c,
  src/openvz/openvz_driver.c, src/qemu/qemu_driver.c,
  src/test/test_driver.c, src/uml/uml_driver.c: Update for
  renamed APIs.

This patch adds an optional attribute to the <bootp> tag, that
allows to specify a TFTP server address other than the address of
the DHCP server itself.

This can be used to forward the BOOTP settings of the host down to the
guest.  This is something that configurations such as Xen's default
network achieve naturally, but must be done manually for NAT.

* docs/formatnetwork.html.in: Document new attribute.
* docs/schemas/network.rng: Add it to schema.
* src/conf/network_conf.h: Add it to struct.
* src/conf/network_conf.c: Add it to parser and pretty printer.
* src/network/bridge_driver.c: Put it in the dnsmasq command line.
* tests/networkxml2xmlin/netboot-proxy-network.xml
  tests/networkxml2xmlout/netboot-proxy-network.xml
  tests/networkxml2xmltest.c: add new tests

Currently, libvirtd will start a dnsmasq process for the virtual
network, but (aside from killing the dnsmasq process and replacing it),
there's no way to define tftp boot options.

This change introduces the appropriate tags to the dhcp configuration:

 <network>
   <name>default</name>
   <bridge name="virbr%d" />
   <forward/>
   <ip address="192.168.122.1" netmask="255.255.255.0">
     <tftp root="/var/lib/tftproot" />
     <dhcp>
       <range start="192.168.122.2" end="192.168.122.254" />
       <bootp file="pxeboot.img"/>
     </dhcp>
   </ip>
 </network>

When the attributes are present, these are passed to the
arguments to dnsmasq:

 dnsmasq [...] --enable-tftp --tftp-root /srv/tftp --dhcp-boot pxeboot.img
               ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^^^
                      from <tftp />                     from <bootp />

At present, only local tftp servers are supported (ie, dnsmasq runs as
the tftp server), but we could improve this in future by adding a
server= attribute.
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

2009-09-21  Paolo Bonzini  <pbonzini@redhat.com>
            Jeremy Kerr  <jk@ozlabs.org>

	* docs/formatnetwork.html.in: Document new tags.
	* docs/formatnetwork.html: Regenerate.
	* docs/schemas/network.rng: Update.
	* src/network_conf.c (virNetworkDefFree): Free new fields.
	(virNetworkDHCPRangeDefParseXML): Parse <bootp>.
	(virNetworkIPParseXML): New, parsing <dhcp> and <tftp>.
	(virNetworkDefParseXML): Use virNetworkIPParseXML instead of
	virNetworkDHCPRangeDefParseXML.
	(virNetworkDefFormat): Pretty print new fields.
	* src/network_conf.h (struct _virNetworkDef): Add netboot fields.
	* src/network_driver.c (networkBuildDnsmasqArgv): Add
	TFTP and BOOTP arguments.

	* tests/Makefile.am (EXTRA_DIST): Add networkschemadata.
	* tests/networkschematest: Look in networkschemadata.
	* tests/networkschemadata/netboot-network.xml: New.

* src/capabilities.c, src/capabilities.h, src/domain_conf.c,
  src/domain_conf.h, src/domain_event.c, src/domain_event.h,
  src/interface_conf.c, src/interface_conf.h,
  src/network_conf.c, src/network_conf.h, src/node_device_conf.c,
  src/node_device_conf.h, src/secret_conf.c, src/secret_conf.h,
  src/storage_conf.c, src/storage_conf.h, src/storage_encryption_conf.c,
  src/storage_encryption_conf.h: Move to src/conf/
* src/Makefile.am: Add -Isrc/conf to the individual build targets
  which need to use XML config APIs. Remove LIBXML_CFLAGS, LIBSSH2_CFLAGS
  and SELINUX_CFLAGS from global INCLUDES and only have them in build
  targets which actually need them.  Create a libvirt_conf.la
  convenience library for all config parsers
* src/hostusb.h: Remove bogus include of domain_conf.h
* tests/Makefile.am: Add -Isrc/conf. Remove bogus -I$builddir/src
  since it never has any generated header files
* daemon/Makefile.am: Add -Isrc/conf
* proxy/Makefile.am: Add -Isrc/conf and cope with renamed files
* src/hash.c: Remove bogus include of libxml/threads.h

by running this command:
git ls-files -z | xargs -0 perl -pi -0777 -e 's/\n\n+$/\n/'
This is in preparation for a more strict make syntax-check
rule that will detect trailing blank lines.

If two virtual networks have the same hardcoded bridge device (which
prevents them from being active simultaneously) we still want to define
them at daemon startup, so the user has a fighting chance of correcting
the XML error.

Add an extra flag to SetBridge to avoid reporting an error if there is
a bridge collision, and use this when loading network configs at startup.

This regressed via commit 4c3f3b4d.

  support, patch by Soren Hansen
* AUTHORS: add Soren
daniel

* src/network_conf.c src/network_conf.h src/qemu_driver.c: add
  support for a domain name in network configurations, patch by
  JJ Reynolds with bugfix raised by Dan
* src/openvz_conf.c: fix to small bug in openvzReadConfigParam
  by Evgeniy Sokolov
Daniel

  add static host definition for dnsmasq
Daniel