* src/qemu/qemu_driver.c (qemudDomainAttachDevice): Call
virCgroupDenyDevicePath only if cgroup is non-NULL.

* src/qemu/qemu_conf.h: Remove QEMU_CMD_FLAG_0_12 and just leave
  the lone JSON flag
* src/qemu/qemu_conf.c: Enable JSON on QEMU 0.13 or later, but
  leave it disabled for now

* src/qemu/qemu_conf.c: CPU models should be probed only if the
  a guest's XML contains CPU model, not each time a qemu command line
  is generated.

The XML XPath for detecting JSON in the running VM statefile was
wrong causing all VMs to get JSON mode enabled at libvirtd restart.

In addition if a VM was running a JSON enabled QEMU once, and then
altered to point to a non-JSON enabled QEMU later the 'monJSON'
flag would not get reset to 0.

* src/qemu/qemu_driver.c: Fix setting/detection of JSON mode

* src/qemu/qemu_driver.c: The 'if' statement is supposed to check return
  value of pci = pciGetDevice(conn, ...); , but check uses if (!dev),
  fix it

Support for memory statistics reporting is accepted for qemu inclusion.
Statistics are reported via the monitor command 'info balloon' as a comma
seprated list:

(qemu) info balloon
balloon: actual=1024,mem_swapped_in=0,mem_swapped_out=0,major_page_faults=88,minor_page_faults=105535,free_mem=1017065472,total_mem=1045229568

Libvirt, qemu, and the guest operating system may support a subset of the
statistics defined by the virtio spec.  Thus, only statistics recognized by
components will be reported.

* src/qemu/qemu_driver.c src/qemu/qemu_monitor_text.[ch]: implement the
  new entry point by using info balloon monitor command

Set up the types for the domainMemoryStats function and insert it into the
virDriver structure definition.  Because of static initializers, update
every driver and set the new field to NULL.

* include/libvirt/libvirt.h.in: new API
* src/driver.h src/*/*_driver.c src/vbox/vbox_tmpl.c: add the new
  entry to the driver structure
* python/generator.py: fix compiler errors, the actual python binding is
  implemented later

* src/qemu/qemu_conf.c src/qemu/qemu_conf.h src/qemu/qemu_driver.c:
  add the new entry point, extend capabilities and code to interract
  with qemu

* src/driver.h: add an extra entry point in the structure
* src/esx/esx_driver.c src/lxc/lxc_driver.c src/opennebula/one_driver.c
  src/openvz/openvz_driver.c src/phyp/phyp_driver.c src/qemu/qemu_driver.c
  src/remote/remote_driver.c src/test/test_driver.c src/uml/uml_driver.c
  src/vbox/vbox_tmpl.c src/xen/xen_driver.c: add NULL entry points for
  all drivers

* src/qemu/qemu_driver.c (doNonTunnelMigrate): Don't let a
NULL "uri_out" provoke a NULL-dereference in doNativeMigrate:
supply omitted goto-after-qemudReportError.

* src/qemu/qemu_driver.c (qemudDomainMigratePrepareTunnel): Upon an
out of memory error, we would end up with unixfile==NULL and attempt
to unlink(NULL).  Skip the unlink when it's NULL.

* src/qemu/qemu_driver.c (qemudDomainMigrateFinish2): Set
"event" to NULL after qemuDomainEventQueue frees it, so a
subsequent free (after endjob label) upon qemuMonitorStartCPUs
failure does not cause a double free.

* src/qemu/qemu_driver.c: #undef LOOKUP_PTYS after use in
  qemudFindCharDevicePTYsMonitor()

If there are no references remaining to the object, vm is set to NULL
and vm->persistent cannot be accessed.  Fixed by this trivial patch.

* src/qemu/qemu_driver.c (qemudDomainCoreDump): Avoid possible
  NULL pointer dereference on --crash dump.

This is trivial for QEMU since you just have to not stop the vm before
starting the dump.  And for Xen, you just pass the flag down to xend.

* include/libvirt/libvirt.h.in (virDomainCoreDumpFlags): Add VIR_DUMP_LIVE.
* src/qemu/qemu_driver.c (qemudDomainCoreDump): Support live dumping.
* src/xen/xend_internal.c (xenDaemonDomainCoreDump): Support live dumping.
* tools/virsh.c (opts_dump): Add --live. (cmdDump): Map it to VIR_DUMP_LIVE.

This patch adds the --crash option (already present in "xm dump-core")
to "virsh dump".  virDomainCoreDump already has a flags argument, so
the API/ABI is untouched.

* include/libvirt/libvirt.h.in (virDomainCoreDumpFlags): New flag for
  CoreDump
* src/test/test_driver.c (testDomainCoreDump): Do not crash
  after dump unless VIR_DUMP_CRASH is given.
* src/qemu/qemu_driver.c (qemudDomainCoreDump): Shutdown the domain
  instead of restarting it if --crash is passed.
* src/xen/xend_internal.c (xenDaemonDomainCoreDump): Support --crash.
* tools/virsh.c (opts_dump): Add --crash.
  (cmdDump): Map it to flags for virDomainCoreDump and pass them.

1) qemuMigrateToCommand uses ">>" so we have to truncate the file
before starting the migration;

2) the command wasn't updated to chown the driver and set/restore
the security lavels;

3) the VM does not have to be resumed if migration fails;

4) the file is not removed when migration fails.

* src/qemu/qemu_driver.c (qemuDomainCoreDump): Truncate file before
  dumping, set/restore ownership and security labels for the file.

Those were pointed by DanB in his review but not yet fixed

* src/qemu/qemu_driver.c: qemudWaitForMonitor() use EnterMonitorWithDriver()
  and ExitMonitorWithDriver() there
* src/qemu/qemu_monitor_text.c: checking fro strdu failure and hash
  table add error in qemuMonitorTextGetPtyPaths()

This change makes the QEMU driver get pty paths from the output of the
monitor 'info chardev' command. This output is structured, and contains
both the name of the device and the path on the same line. This is
considerably more reliable than parsing the startup log output, which
requires the parsing code to know which order QEMU will print pty
information in.

Note that we still need to parse the log output as the monitor itself
may be on a pty. This should be rare, however, and the new code will
replace all pty paths parsed by the log output method once the monitor
is available.

* src/qemu/qemu_monitor.(c|h) src/qemu_monitor_text.(c|h): Implement
  qemuMonitorGetPtyPaths().
* src/qemu/qemu_driver.c: Get pty path information using
  qemuMonitorGetPtyPaths().

* src/qemu/qemu_driver.c: Parse pty devices for channels

Change -monitor, -serial and -parallel output to use -chardev if it is
available.
* src/qemu/qemu_conf.c: Update qemudBuildCommandLine to use -chardev where
  available.
* tests/qemuxml2argvtest.c tests/qemuxml2argvdata/: Add -chardev equivalents
  for all current serial and parallel tests.

Even if qemudStartVMDaemon suceeds, an error was logged such as
'qemuRemoveCgroup:1778 : internal error Unable to find cgroup for'.
This is because qemudStartVMDaemon calls qemuRemoveCgroup to
ensure that old cgroup does not remain. This workaround makes
sense but leaving an error message may confuse users.
* src/qemu/qemu_driver.c: a an option to the function to suppress the
  error being logged

This adds a new flag, VIR_MIGRATE_PAUSED, that mandates pausing
the migrated VM before starting it.

* include/libvirt/libvirt.h.in (virDomainMigrateFlags): Add VIR_MIGRATE_PAUSED.
* src/qemu/qemu_driver.c (qemudDomainMigrateFinish2): Handle VIR_MIGRATE_PAUSED.
* tools/virsh.c (opts_migrate): Add --suspend. (cmdMigrate): Handle it.
* tools/virsh.pod (migrate): Document it.

This makes a small change on the failed-migration path.  Up to now,
all VMs that failed non-live migration after the "stop" command
were restarted.  This must not be done when the VM was paused in
the first place.

* src/qemu/qemu_driver.c (qemudDomainMigratePerform): Do not restart
  a paused VM that fails migration.  Set paused state after "stop",
  reset it after failure.

See also:
https://bugzilla.redhat.com/show_bug.cgi?id=545400#c1

Replace free(virBufferContentAndReset()) with virBufferFreeAndReset().
Update documentation and replace all remaining calls to free() with
calls to VIR_FREE(). Also add missing calls to virBufferFreeAndReset()
and virReportOOMError() in OOM error cases.

The QEMU 0.10.0 release (and possibly other 0.10.x) has a bug where
it sometimes/often forgets to display the initial monitor greeting
line, soley printing a (qemu).  This in turn confuses the text
console parsing because it has a '(qemu)' it is not expecting. The
confusion results in a negative malloc. Bad things follow.

This re-writes the text console handling to be more robust. The key
idea is that it should only look for a (qemu), once it has seen the
original command echo'd back. This ensures it'll skip the bogus stray
(qemu) with broken QEMUs.

* src/qemu/qemu_monitor.c: Add some (disabled) debug code
* src/qemu/qemu_monitor_text.c: Re-write way command replies
  are detected

Since the monitor I/O is processed out of band from the main
thread(s) invoking monitor  commands, the virDomainObj may be
deleted by the I/O thread. The qemuDomainObjBeginJob takes an
extra reference to protect against final deletion, but this
reference is released by the corresponding EndJob call. THus
after the EndJob call it may not be valid to reference the
virDomainObj any more. To allow callers to detect this, the
EndJob call is changed to return the remaining reference count.

* src/conf/domain_conf.c: Make virDomainObjUnref return the
  remaining reference count
* src/qemu/qemu_driver.c: Avoid referencing virDomainObjPtr
  after qemuDomainObjEndJob if it has been deleted.

* src/qemu/qemu_monitor_json.c: Hook up reset, shutdown,
  poweroff and stop events

* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add callbacks
  for reset, shutdown, poweroff and stop events. Add convenience
  methods for emiting those events

With addition of events there will be alot of callbacks.
To avoid having to add many APIs to register callbacks,
provide them all at once in a big table

* src/qemu/qemu_driver.c: Pass in a callback table to QEMU
  monitor code
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h Replace
  the EOF and disk secret callbacks with a callback table

Initial support for the new QEMU monitor protocol  using JSON
as the data encoding format instead of plain text

* po/POTFILES.in: Add src/qemu/qemu_monitor_json.c
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Hack to turn on QMP
  mode. Replace with a version number check on >= 0.12 later
* src/qemu/qemu_monitor.c: Delegate to json monitor if enabled
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add
  impl of QMP protocol
* src/Makefile.am: Add src/qemu/qemu_monitor_json.{c,h}

Now that drivers are using a private domain object state blob,
the virDomainObjFormat/Parse methods are no longer able to
directly serialize all neccessary state to/from XML. It is
thus neccessary to introduce a pair of callbacks fo serializing
private state.

The code for serializing vCPU PIDs and the monitor device
config can now move out of domain_conf.c and into the
qemu_driver.c where they belong.

* src/conf/capabilities.h: Add callbacks for serializing private
  state to/from XML
* src/conf/domain_conf.c, src/conf/domain_conf.h: Remove the
  monitor, monitor_chr, monitorWatch, nvcpupids and vcpupids
  fields from virDomainObjPtr. Remove code that serialized
  those fields
* src/libvirt_private.syms: Export virXPathBoolean
* src/qemu/qemu_driver.c: Add callbacks for serializing monitor
  and vcpupid data to/from XML
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Pass monitor
  char device config into qemuMonitorOpen directly.

The code to start CPUs executing has nothing todo with CPU
affinity masks, so pull it out of the qemudInitCpuAffinity()
method and up into qemudStartVMDaemon()

* src/qemu/qemu_driver.c: Pull code to start CPUs executing out
  of qemudInitCpuAffinity()

The current QEMU disk media change does not support setting the
disk format. The new JSON monitor will support this, so add an
extra parameter to pass this info in

* src/qemu/qemu_driver.c: Pass in disk format when changing media
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
  Add a 'format' arg to qemuMonitorChangeMedia()

* src/qemu/qemu_monitor_text.c: Add missing underscore in the
  migrate_cancel monitor command impl

The qemuMonitorEscape() method, and the VIR_ENUM for migration
status will be needed by the JSON monitor too, so move that code
into the shared qemu_monitor.c file instead of qemu_monitor_text.c

* src/qemu/qemu_monitor.h: Declare qemuMonitorMigrationStatus enum
  and qemuMonitorEscapeArg and qemuMonitorEscapeShell methods
* src/qemu/qemu_monitor.c: Implement qemuMonitorMigrationStatus enum
  and qemuMonitorEscapeArg and qemuMonitorEscapeShell methods
* src/qemu/qemu_monitor_text.c: Remove above methods/enum

If QEMU shuts down while we're in the middle of processing a
monitor command, the monitor will be freed, and upon cleaning
up we attempt to do  qemuMonitorUnlock(priv->mon) when priv->mon
is NULL.

To address this we introduce proper reference counting into
the qemuMonitorPtr object, and hold an extra reference whenever
executing a command.

* src/qemu/qemu_driver.c: Hold a reference on the monitor while
  executing commands, and only NULL-ify the priv->mon field when
  the last reference is released
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add reference
  counting to handle safe deletion of monitor objects