We parse the bandwidth rates as unsinged long long,
then try to fit them in VIR_TYPED_PARAM_UINT.

Report an error if they exceed UINT_MAX instead of
quietly using wrong values.

https://bugzilla.redhat.com/show_bug.cgi?id=1043735

https://bugzilla.redhat.com/show_bug.cgi?id=1072653

Upon successful upload of a volume, the target volume and storage pool
were not updated to reflect any changes as a result of the upload. Make
use of the existing stream close callback mechanism to force a backend
pool refresh to occur in a separate thread once the stream closes. The
separate thread should avoid potential deadlocks if the refresh needed
to wait on some event from the event loop which is used to perform
the stream callback.

Signed-off-by: NEric Blake <eblake@redhat.com>

The variable 'k' in the print_cpu_usage function is not used anywhere
and can fire a warning on some compilers.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Currently, the function follows the usual pattern used in our code:

  int ret = -1;
  ...
  ret = 0;
 cleanup:
  return ret;

However, the function always call exit() on error, so the cleanup
label is never jumped onto. Therefore, it doesn't make any sense to
have the parse_argv function return an integer value, if it
effectively can return only value of zero.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

There are multiple mount points after commit 725a211f, but one comment
wasn't changed to use plurals.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

* docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: update localizations and regenerate

Cygwin has getifaddrs(), but not AF_LINK, leading to:

util/virstats.c: In function 'virNetInterfaceStats':
util/virstats.c:138:41: error: 'AF_LINK' undeclared (first use in this function)
         if (ifa->ifa_addr->sa_family != AF_LINK)
...

* src/util/virstats.c (virNetInterfaceStats): Only use getifaddrs
if AF_LINK is present.
Signed-off-by: NEric Blake <eblake@redhat.com>

libvirt previously only touched an interface's disable_ipv6 setting in
sysfs if it needed to be set to 1, assuming that 0 is the
default. Apparently that isn't always the case though (kernel 3.15.7-1
in Arch Linux reportedly defaults a new interface's disable_ipv6
setting to 1) so this patch explicitly sets it to 0 or 1 as
appropriate.

Introduced by commit 15213d1e, not yet released.

 - mention that one disk and one network limitation
   is no longer current for 1.2.6 and newer
 - add 'cdrom' device to the sample domain XML

With this in place, I can (finally!) now do:

virsh blockcommit $dom vda --shallow --verbose --pivot

and watch qemu shorten the backing chain by one, followed by
libvirt automatically updating the dumpxml output, effectively
undoing the work of virsh snapshot-commit --no-metadata --disk-only.
Commit is SOOOO much faster than blockpull, when I'm still fairly
close in time to when the temporary qcow2 wrapper file was created
via a snapshot operation!

* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Implement live
commit.
Signed-off-by: NEric Blake <eblake@redhat.com>

A future patch is going to wire up qemu active block commit jobs;
but as they have similar events and are canceled/pivoted in the
same way as block copy jobs, it is easiest to track all bookkeeping
for the commit job by reusing the <mirror> element.  This patch
adds domain XML to track which job was responsible for creating a
mirroring situation, and adds a job='copy' attribute to all
existing uses of <mirror>.  Along the way, it also massages the
qemu monitor backend to read the new field in order to generate
the correct type of libvirt job (even though it requires a
future patch to actually cause a qemu event that can be reported
as an active commit).  It also prepares to update persistent XML
to match changes made to live XML when a copy completes.

* docs/schemas/domaincommon.rng: Enhance schema.
* docs/formatdomain.html.in: Document it.
* src/conf/domain_conf.h (_virDomainDiskDef): Add a field.
* src/conf/domain_conf.c (virDomainBlockJobType): String conversion.
(virDomainDiskDefParseXML): Parse job type.
(virDomainDiskDefFormat): Output job type.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Distinguish
active from regular commit.
* src/qemu/qemu_driver.c (qemuDomainBlockCopy): Set job type.
(qemuDomainBlockPivot, qemuDomainBlockJobImpl): Clean up job type
on completion.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror-old.xml:
Update tests.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-disk-active-commit.xml: New
file.
* tests/qemuxml2xmltest.c (mymain): Drive new test.
Signed-off-by: NEric Blake <eblake@redhat.com>

If all features are set to default (including the capabilities policy),
but some capabilities are toggled, we need to output the <features>
element when formatting the config.

commit 136ad497
forgot to add an end-tags for hugepages.
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>

We were not directly saving the domain XML to file after starting
or finishing a blockcopy.  Without the startup write, a libvirtd
restart in the middle of a copy job would forget that the job was
underway.  Then at pivot, we were indirectly writing new XML in
reaction to events that occur as we stop and restart the guest CPUs.
But there was a race: since pivot is an async action, it is possible
that libvirtd is restarted before the pivot completes, so if XML
changes during the event, that change was not written.  The original
blockcopy code cleared out the <mirror> element prior to restarting
the CPUs, but this is also a race, observed if a user does an async
pivot and a dumpxml before the event occurs.  Furthermore, this race
will interfere with active commit in a future patch, because that
code will rely on the <mirror> element at the time of the qemu event
to determine whether to inform the user of a normal commit or an
active commit.

Fix things by saving state any time we modify live XML, while
delaying XML disk modifications until after the event completes.  We
still need a to teach libvirtd restarts to examine all existing
<mirror> elements to see if the job completed in the meantime (that
is, if libvirtd misses the event, the updated state still needs to be
updated in live XML), but that will be a later patch, in part because
we also need to to start taking advantage of newer qemu's ability to
keep the job around after completion rather than the current usage
where the job disappears both on error and on success.

* src/qemu/qemu_driver.c (qemuDomainBlockCopy): Track XML change
on disk.
(qemuDomainBlockJobImpl, qemuDomainBlockPivot): Move job-end XML
rewrites...
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): ...here.
Signed-off-by: NEric Blake <eblake@redhat.com>

Doing a blockcopy operation across a libvirtd restart is not very
robust at the moment.  In particular, we are clearing the <mirror>
element prior to telling qemu to finish the job.  Also, thanks to the
ability to request async completion, the user can easily regain
control prior to qemu actually finishing the effort, and they should
be able to poll the domain XML to see if the job is still going.

A future patch will fix things to actually wait until qemu is done
before modifying the XML to reflect the job completion.  But since
qemu issues identical BLOCK_JOB_COMPLETE events regardless of whether
the job was cancelled (kept the original disk) or completed (pivoted
to the new disk), we have to track which of the two operations were
used to end the job.  Furthermore, we'd like to avoid attempts to
end a job where we are already waiting on an earlier request to qemu
to end the job.  Likewise, if we miss the qemu event (perhaps because
it arrived during a libvirtd restart), we still need enough state
recorded to be able to determine how to modify the domain XML once
we reconnect to qemu and manually learn whether the job still exists.

Although this patch doesn't actually fix the problem, it is a
preliminary step that makes it possible to track whether a job
has already begun steps towards completion.

* src/conf/domain_conf.h (virDomainDiskMirrorState): New enum.
(_virDomainDiskDef): Convert bool mirroring to new enum.
* src/conf/domain_conf.c (virDomainDiskDefParseXML)
(virDomainDiskDefFormat): Handle new values.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Adjust
client.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot)
(qemuDomainBlockJobImpl): Likewise.
* docs/schemas/domaincommon.rng (diskMirror): Expose new values.
* docs/formatdomain.html.in (elementsDisks): Document it.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Test it.
Signed-off-by: NEric Blake <eblake@redhat.com>

If PCI passthrough type is not supported, we should error out rather than
continue building the command line.

When starting a domain, the type has been already checked by
qemuPrepareHostdevPCICheckSupport() before building qemu command line,
so the problem doesn't emerge.

But when coverting a domain xml without specifying passthrough type explictly
to qemu arg, we will get a malformed command line.

the xml:

    <hostdev mode='subsystem' type='pci' managed='yes'>
      <source>
        <address domain='0x0001' bus='0x03' slot='0x00' function='0x0'/>
      </source>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
    </hostdev>

the converted command line:

  -device ,host=0001:03:00.0,id=hostdev0,bus=pci.0,addr=0x5

After this patch, virsh gives an error message:

  virsh domxml-to-native qemu-argv /tmp/tmp.xml
  error: internal error: invalid PCI passthrough type 'default'
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

  <memoryBacking>
    <hugepages>
      <page size="1" unit="G" nodeset="0-3,5"/>
      <page size="2" unit="M" nodeset="4"/>
    </hugepages>
  </memoryBacking>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This internal API just checks if two bitmaps intersect or not.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Use better detection of hugetlbfs mount points. Yes, there can be
multiple mount points each serving different huge page size.

Since we already have ability to override the mount point in the
qemu.conf file, this crazy backward compatibility code is brought in.
Now we allow multiple mount points, so the "hugetlbfs_mount" option
must take an list of strings (mount points). But previously, it was
just a string, so we must accept both types now.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This should iterate over mount tab and search for hugetlbfs among with
looking for the default value of huge pages.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Use correct mode when pre-creating files (for snapshots). The refactor
changing to storage driver usage caused a regression as some systems
created the file with 000 permissions forbidding qemu to write the file.

Pass mode to the creating functions to avoid the problem.

Regression since 185e07a5.

* docs/schemas/domaincommon.rng: Add bhyve domain type, nmdm
  serial type and master and slave optional attributes for
  serial that are used by nmdm
* tests/domainschematest: Add bhyvexml2argvdata directory
  to validate bhyve XMLs

Fix a -Werror=maybe-uninitialized warning
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Leak introduced in commit 16ebf10f (v1.2.6), detected by valgrind:

==9816== 216 (96 direct, 120 indirect) bytes in 6 blocks are definitely lost in loss record 665 of 821
==9816==    at 0x4A081D4: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==9816==    by 0x50836FB: virAlloc (viralloc.c:144)
==9816==    by 0x1DBDBE27: udevProcessPCI (node_device_udev.c:546)
==9816==    by 0x1DBDD79D: udevGetDeviceDetails (node_device_udev.c:1293)

* src/util/virpci.h (virPCIEDeviceInfoFree): New prototype.
* src/util/virpci.c (virPCIEDeviceInfoFree): New function.
* src/conf/node_device_conf.c (virNodeDevCapsDefFree): Clear
pci_express under pci case.
(virNodeDevCapPCIDevParseXML): Avoid leak.
* src/node_device/node_device_udev.c (udevProcessPCI): Likewise.
* src/libvirt_private.syms (virpci.h): Export it.
Signed-off-by: NEric Blake <eblake@redhat.com>

Finding virPCIE* code is more intuitive if located in virpci.h
instead of node_device_conf.h.

* src/conf/node_device_conf.h (virPCIELinkSpeed, virPCIELink)
(virPCIEDeviceInfo): Move...
* src/util/virpci.h: ...here.
* src/conf/node_device_conf.c (virPCIELinkSpeed): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

The compiler can alert us to places where we need to expand switch
statements because we add a new enum value, but only if we don't
have a default case.

* src/conf/node_device_conf.c (virNodeDeviceDefFormat)
(virNodeDevCapsDefParseXML, virNodeDevCapsDefFree): Drop default
case.
Signed-off-by: NEric Blake <eblake@redhat.com>

Commit e5f36698 introduces a
false-positive build failure in the sound card model handling switch.
Initialize the model to NULL although the value should never be used.

Use correct type in the switch and handle all sound card models in it so
that the compiler tracks additions.

Libvirt documents that the default entropy source for the 'random'
backend of a RNG device is /dev/random. Instead of storing and
propagating NULL across our code and checking it in multiple places fill
the default in the post parse callback and use that in the other places.

Covers the whole ppc64 family. Example bug for binutils:

https://bugzilla.redhat.com/show_bug.cgi?id=834651

Since 24e5cafb (thankfully unreleased)
when a VM with an empty disk drive would be started the code would call
stat() on NULL path as a check was missing from the callback rendering
machines unstartable.

Report success when the path is empty (denoting an empty drive).

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

virTimeFieldsThenRaw will never return negative result, so I clean up
the related meaningless judgements to make it better.
Signed-off-by: NJames <james.wangyufei@huawei.com>
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NLi Yang <liyang.fnst@cn.fujitsu.com>

qemu supports adding multiple RNG devices. This patch allows libvirt to
support this.