- 10 5月, 2018 6 次提交
-
-
由 Lin Ma 提交于
It's helpful for users while they type certain kind of VSH_OT_ARGV options. e.g. $ virsh domstats --domain sles12sp3 --d<TAB> Signed-off-by: NLin Ma <lma@suse.com>
-
由 Lin Ma 提交于
These VSH_OT_STRING "domain" options support domain name completion now. Signed-off-by: NLin Ma <lma@suse.com>
-
由 Lin Ma 提交于
Signed-off-by: NLin Ma <lma@suse.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Lin Ma 提交于
The first entry in the returned array is the substitution for TEXT. It causes unnecessary output if other commands or options share the same prefix, e.g. $ virsh des<TAB><TAB> des desc destroy or $ virsh domblklist --d<TAB><TAB> --d --details --domain This patch fixes the above issue. Signed-off-by: NLin Ma <lma@suse.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Lin Ma 提交于
Signed-off-by: NLin Ma <lma@suse.com>
-
由 Lin Ma 提交于
centralize the definition of macro VIRSH_COMMON_OPT_DOMAIN_FULL to virsh.h to avoid unnecessary duplicated definition Signed-off-by: NLin Ma <lma@suse.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 09 5月, 2018 2 次提交
-
-
由 Ján Tomko 提交于
Unused since commit <a7424faf>. Signed-off-by: NJán Tomko <jtomko@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Peter Krempa 提交于
Use the new helper when checking that the VM needs to be tainted as a host-cdrom passthrough. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NLaine Stump <laine@laine.org>
-
- 08 5月, 2018 4 次提交
-
-
由 Cole Robinson 提交于
It's only required on el5 which we don't support anymore. Everywhere else it's not used for anything useful https://fedoraproject.org/wiki/RPMGroupsSigned-off-by: NCole Robinson <crobinso@redhat.com>
-
由 Igor Gnatenko 提交于
None of currently supported distributions need that. Last one was EL5 which is EOL for a while. Signed-off-by: NIgor Gnatenko <ignatenkobrain@fedoraproject.org> Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
由 Igor Gnatenko 提交于
None of currently supported distributions need that. It was needed last for EL5 which is EOL now Signed-off-by: NIgor Gnatenko <ignatenkobrain@fedoraproject.org> Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
由 David Kiarie 提交于
Remove my name and email from these files Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com> Signed-off-by: NDavid Kiarie <davidkiarie4@gmail.com>
-
- 07 5月, 2018 28 次提交
-
-
由 Peter Krempa 提交于
STRPREFIX takes only two arguments, but the code it was adapted from used function with 3 arguments. Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Peter Krempa 提交于
Make sure that 'host_device' is generated for type='block'. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Peter Krempa 提交于
The test cases would correspond to the following -drive command lines: dir-fat-cache.xml: -drive file=fat:/var/somefiles,if=none,id=drive-dummy,readonly=on,cache=directsync -device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy,write-cache=off file-backing_basic-cache-directsync.xml: -drive file=/var/lib/libvirt/images/a,format=qcow2,if=none,id=drive-dummy,cache=directsync -device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy,write-cache=off file-backing_basic-cache-none.xml: -drive file=/var/lib/libvirt/images/a,format=qcow2,if=none,id=drive-dummy,cache=none -device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy,write-cache=on file-backing_basic-cache-unsafe.xml: -drive file=/var/lib/libvirt/images/a,format=qcow2,if=none,id=drive-dummy,cache=unsafe -device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy,write-cache=on file-backing_basic-cache-writeback.xml: -drive file=/var/lib/libvirt/images/a,format=qcow2,if=none,id=drive-dummy,cache=writeback -device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy,write-cache=on file-backing_basic-cache-writethrough.xml: -drive file=/var/lib/libvirt/images/a,format=qcow2,if=none,id=drive-dummy,cache=writethrough -device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy,write-cache=off network-qcow2-backing-chain-cache-unsafe.xml: -drive file=rbd:rbdpool/rbdimg:id=testuser-rbd:auth_supported=cephx\;none: mon_host=host1.example.com\;host2.example.com, file.password-secret=node-a-s-secalias,format=qcow2, if=none,id=drive-dummy,cache=directsync -device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy,write-cache=off Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Peter Krempa 提交于
The test cases would correspond to the following -drive command lines: file-backing_basic-detect.xml: -drive file=/var/lib/libvirt/images/a,format=qcow,if=none,id=drive-dummy,detect-zeroes=on -device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy file-backing_basic-unmap-detect.xml: -drive file=/var/lib/libvirt/images/a,format=qcow,if=none,id=drive-dummy,discard=unmap,detect-zeroes=unmap -device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy file-backing_basic-unmap-ignore.xml: -drive file=/var/lib/libvirt/images/a,format=qcow,if=none,id=drive-dummy,discard=ignore,detect-zeroes=on -device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy file-backing_basic-unmap.xml: -drive file=/var/lib/libvirt/images/a,format=qcow,if=none,id=drive-dummy,discard=unmap -device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Peter Krempa 提交于
iscsi and rbd support authentication of the connection. Combine it with encryption of qcow2. The top level disk image would generate the following '-drive' cmdline: -drive file=rbd:rbdpool/rbdimg:id=testuser-rbd:auth_supported=cephx\;none: mon_host=host1.example.com\;host2.example.com, file.password-secret=node-a-s-secalias,encrypt.format=luks, encrypt.key-secret=node-b-f-encalias,format=qcow2, if=none,id=drive-dummy -device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Peter Krempa 提交于
Add tests for backing chain handling, including a very long chain which is fully specified in the XML and an unterminated chain. The top level disk image would generate the following '-drive': file-qcow2-backing-chain-encryption.xml: -drive file=/var/lib/libvirt/images/a,encrypt.format=luks, encrypt.key-secret=node-b-f-encalias,format=qcow2,if=none,id=drive-dummy -device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy file-qcow2-backing-chain-noopts.xml: -drive file=/var/lib/libvirt/images/rhel7.3.1507297895,format=qcow2,if=none,id=drive-dummy -device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy file-qcow2-backing-chain-unterminated.xml: -drive file=/var/lib/libvirt/images/rhel7.3.1507297895,format=qcow2,if=none,id=drive-dummy -device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Peter Krempa 提交于
Apart from adding test data add a function which sets up fake secrets for the test. The top level disk image would generate the following '-drive' cmdline: -drive file=/path/luks.img,key-secret=test1-encalias,format=luks,if=none,id=drive-dummy -device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Peter Krempa 提交于
Test that the 'aio' option is applied correctly for the 'file' protocol backend and across the backing chain. The top level disk image would generate the following '-drive' cmdline: file-backing_basic-aio_threads: -drive file=/var/lib/libvirt/images/a,format=qcow,if=none,id=drive-dummy,aio=threads -device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy file-raw-aio_native: -drive file=/path/to/i.img,format=raw,if=none,id=drive-dummy,cache=none,aio=native -device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy,write-cache=on Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Peter Krempa 提交于
Test mapping of the 'FAT' disk format to 'vvfat' in qemu. The top level disk image would generate the following '-drive' cmdline: dir-fat-readonly.xml: -drive file=fat:/var/somefiles,if=none,id=drive-dummy,readonly=on -device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy dir-fat-floppy.xml -drive file=fat:floppy:/var/somefiles,if=none,id=drive-dummy,readonly=on Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Peter Krempa 提交于
Formats supporting backing chain such as qed, vmdk, don't have any other parameters than the backing store and 'qcow' has only encryption params which will be tested extra. Add this test case so they are covered since any further test cases will mainly care about 'qcow2' and 'raw'. The top level disk image would generate the following '-drive' cmdline: -drive file=/var/lib/libvirt/images/a,format=qed,if=none,id=drive-dummy -device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Peter Krempa 提交于
Similarly to the 'raw' case add tests for bochs, cloop, dmg, ploop, vdi vhd, and vpc. Covering all supported non-backing formats. Note that the JSON name for 'ploop' maps to 'parallels' and 'vhd' maps to 'vhdx'. Files added here would result in the followint configs: file-bochs-noopts.xml: -drive file=/path/to/i.img,format=bochs,if=none,id=drive-dummy -device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy file-cloop-noopts.xml: -drive file=/path/to/i.img,format=cloop,if=none,id=drive-dummy -device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy file-dmg-noopts.xml: -drive file=/path/to/i.img,format=dmg,if=none,id=drive-dummy -device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy file-ploop-noopts.xml: -drive file=/path/to/i.img,format=ploop,if=none,id=drive-dummy -device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy file-vdi-noopts.xml: -drive file=/path/to/i.img,format=vdi,if=none,id=drive-dummy -device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy file-vhd-noopts.xml: -drive file=/path/to/i.img,format=vhd,if=none,id=drive-dummy -device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy file-vpc-noopts.xml: -drive file=/path/to/i.img,format=vpc,if=none,id=drive-dummy -device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Peter Krempa 提交于
Test the JSON props generator with a very simple 'raw' image with no other options. The node-names for the image are 31 bytes long so that we validate our node name detector. The top level disk image would generate the following '-drive' cmdline: -drive file=/var/lib/libvirt/images/i.img,format=raw,if=none,id=drive-dummy -device virtio-blk-pci,scsi=off,drive=drive-dummy,id=dummy Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Peter Krempa 提交于
Add a test infrastructure that will allow testing the JSON object generator used for generating data to use with blockdev-add. The resulting disk including the backing chain is validated to conform to the QAPI schema and the expected output files. The first test cases make sure that libvirt will not allow nodenames exceeding 31 chars. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Peter Krempa 提交于
The function will be reused in the test code where we don't care much that the gluster debug level can't be populated from the qemu config. Set the level only when 'cfg' is passed. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Peter Krempa 提交于
It will be used in the qemublocktest. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Peter Krempa 提交于
Remove gnulib from _LDADD and move LDADDS to replace it. Also reformat the _SOURCES so that they can be easily extended. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Peter Krempa 提交于
New tests will add new data structures so rename the 'data' structure. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Peter Krempa 提交于
When using blockdev-add and friends, libvirt will need to create also properties for the qcow2/raw/... format handler in qemu. This patch adds the infrastructure and implements all formats known to libvirt including all properties which are expressed at the format level in qemu. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Peter Krempa 提交于
Enabling discard for the storage node allows the format drivers to discard snapshots and other things, while configuration of the format layer actually decides whether to actually discard data on request from the host. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Peter Krempa 提交于
This will be required when doing blockdev-add to conform with the approach qemu choses to create the disks. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Peter Krempa 提交于
When used directly with blockdev-add/-blockdev the cache mode will need to be specified directly for every image rather than just for the disk itself. This implements the backing options 'direct' and 'no-flush'. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Peter Krempa 提交于
qemu declares node-name as a 32 byte buffer and silently truncates anything longer than that. This is unacceptable for libvirt, so we need to make sure that we won't ever supply a node-name exceeding 31 chars. Add a function which will do the validation and use it to validate storage-protocol node names. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Peter Krempa 提交于
The gluster protocol in qemu uses two styles, one of which is legacy and not covered by the QAPI schema. To allow using of the new style in the blockdev-add code, add a parameter for qemuBlockStorageSourceGetBackendProps which will switch between the two modes. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Peter Krempa 提交于
Block storage should actually be passed to qemu via 'host_device' or 'host_cdrom' according to the device type. There were no users of this behaviour so we thankfully can change it. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Peter Krempa 提交于
Use virFileIsCDROM to detect whether a block device is a cdrom drive and store it in virStorageSource. This will be necessary to correctly create the 'host_cdrom' backend in qemu when using -blockdev. We assume that host_cdrom makes only sense when used directly as a raw image, but if a backing chain would be put in front of it, libvirt will use 'host_device' in that case. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Peter Krempa 提交于
Add detection mechanism which will allow to check whether a path to a block device is a physical CDROM drive. This will be useful once we will need to pass it to hypervisors. The linux implementation uses an ioctl to do the detection, while the fallback uses a simple string prefix match. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Peter Krempa 提交于
Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Peter Krempa 提交于
Handle VIR_STORAGE_TYPE_DIR in qemuBlockStorageSourceGetBackendProps so that a 'vvfat' driver is used, which emulates a FAT filesystem containing the folders. qemu requires us to add it as a storage layer, since a 'raw' layer is usually put on top of it. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-