As we support multiple scsi controllers there's no need to have a
special test for this controller.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

As we support multiple scsi controllers there's no need to have a
special test for this controller.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Drop the 'device' suffix which is quite pointless.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

We don't need separate files for this test. Also modernize it in the
process.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

We don't need separate files for this test. Also modernize it in the
process.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

We don't need separate files for this test. Also modernize it in the
process.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

We don't need separate files for this test. Also modernize it in the
process.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Now that we have a specific test for testing the 'virtio-scsi'
controller and other tests which test a combination of scsi and non-scsi
devices this test no longer makes sense.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Add a file to aggregate testing for 'virtio-scsi' based on the modern
framework.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Post parse callback adds the 'raw' type only for local files. Remote
files can also have backing store (even local) so we should do this also
for network backed storage.

Note that virStorageFileGetMetadata always considers files with no type
as raw so we will not accidentally traverse the backing chain and allow
unexpected files being labelled with svirt labels.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Modify some existing tests of network-based disks to omit the storage
format specification.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This shows users can now use PCI for RISC-V guests, as long
as they opt into it by manually assigning addresses.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Upcomming change will influence CDROM with cache mode so add a test
case.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

The 'readonly' option allows users to mark vNVDIMM read-only:

<devices>
  ...
  <memory model='nvdimm' access='shared'>
      <source>
          <path>/dev/dax0.0</path>
      </source>
      <target>
          <size unit='MiB'>4094</size>
          <node>0</node>
          <label>
              <size unit='MiB'>2</size>
          </label>
          <readonly/>
      </target>
  </memory>
  ...
</devices>
Signed-off-by: NLuyao Zhong <luyao.zhong@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

The 'pmem' option allows users to specify whether the backend
storage of memory-backend-file is a real persistent memory:

<devices>
  ...
  <memory model='nvdimm' access='shared'>
      <source>
          <path>/dev/dax0.0</path>
          <pmem/>
      </source>
      <target>
          <size unit='MiB'>4094</size>
          <node>0</node>
          <label>
              <size unit='MiB'>2</size>
          </label>
      </target>
  </memory>
  ...
</devices>
Signed-off-by: NLuyao Zhong <luyao.zhong@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

NVDIMM emulation will mmap the backend file, it uses host pagesize
as the alignment of mapping address before, but some backends may
require alignments different from the pagesize. So the 'alignsize'
option is introduced to allow specification of the proper alignment:

<devices>
  ...
  <memory model='nvdimm' access='shared'>
      <source>
          <path>/dev/dax0.0</path>
          <alignsize unit='MiB'>2</alignsize>
      </source>
      <target>
          <size unit='MiB'>4094</size>
          <node>0</node>
          <label>
              <size unit='MiB'>2</size>
          </label>
      </target>
  </memory>
  ...
</devices>
Signed-off-by: NLuyao Zhong <luyao.zhong@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Remove the disk from tests focusing on other aspects so that change to
-blockdev will touch less tests.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Unlike with SPICE and SDL which use the <gl> subelement to enable OpenGL
acceleration, specifying egl-headless graphics in the XML has
essentially the same meaning, thus in case of egl-headless we don't have
a need for the 'enable' element attribute and we'll only be interested
in the 'rendernode' one further down the road.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

Add new functions to generate zPCI command string and append it to
QEMU command line. And the related tests are added.
Signed-off-by: NYi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: NStefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

This patch introduces new XML parser/formatter functions. Uid is
16-bit and non-zero. Fid is 32-bit. They are the two attributes of zpci
which is introduced as PCI address element. Zpci element is parsed and
formatted along with PCI address. And add the related test cases.
Signed-off-by: NYi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: NStefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

QEMU 3.1 supports Hyper-V Enlightened VMCS feature which significantly
speeds up nested Hyper-V on KVM environments.
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>

QEMU 3.1 supports Hyper-V-style PV IPIs making it cheaper for Windows
guests to send an IPI, especially when it targets many CPUs.
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>

virDomainDefCollectBootOrder() is called for every item on the list
for each type of device. One of the checks it makes is to gather the
order attributes from the <boot> element of all devices, and assure
that no two devices have been given the same order.

Since (internally to libvirt, *not* in the domain XML) an <interface
type='hostdev'> is on both the list of hostdev devices and the list of
network devices, it will be counted twice, and the code that checks
for multiple devices with the same boot order will give a false
positive.

To remedy this, we make sure to return early for hostdev devices that
have a parent.type != NONE.

This was introduced in commit 5b75a4, which was first in libvirt-4.4.0.

Resolves: https://bugzilla.redhat.com/1601318Signed-off-by: NLaine Stump <laine@laine.org>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

virtio-serial is an alias for virtio-serial-pci, which
should not have been used for a PCIe-less aarch64/virt
guest but it ended up being used anyway because the
virtio-mmio capability was missing and the algorithm
is buggy.

Fix the test case so that we can fix the algorithm next.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

None of the existing models is suitable for use with
RISC-V virt guests, and we don't want information about
the serial console to be missing from the XML.

The name is based on comments in qemu/hw/riscv/virt.c:

  RISC-V machine with 16550a UART and VirtIO MMIO

and in qemu/hw/char/serial.c:

  QEMU 16550A UART emulation

along with the output of dmesg in the guest:

  Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 13,
    base_baud= 230400) is a 16550A
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NLubomir Rintel <lkundrak@v3.sk>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Signed-off-by: NLubomir Rintel <lkundrak@v3.sk>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Similarly to backing store indexes which will become stable eventually
we need also to be able to format and store in the status XML for later
use the index for the top level of the backing chain.

Add XML formatter, parser, schema and docs.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

If a user configures the backing chain in the XML we should not ignore
it. We already do parse it but don't format it out. As a
safety-precaution don't attempt to format detected chain into the
inactive XML.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Add test data for nested backing chains with/without indexes (used in
status XMLs) which will excercise blockdev and the related work.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The disk is not necessary to test the mdevs.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Qemu-3.0 supports Hyper-V-style PV TLB flush, Windows guests can benefit
from this feature as KVM knows which vCPUs are not currently scheduled (and
thus don't require any immediate action).
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Qemu-3.0 supports so-called 'Reenlightenment' notifications and this (in
conjunction with 'hv-frequencies') can be used make Hyper-V on KVM pass
stable TSC page clocksource to L2 guests.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Qemu-2.12 gained 'hv-frequencies' cpu flag to enable Hyper-V frequency
MSRs. These MSRs are required (but not sufficient) to make Hyper-V on
KVM pass stable TSC page clocksource to L2 guests.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

If a domain has hugepages configured and we're currently building
memory-backend-file for a nvdimm device that domain has we will
put hugepages path onto the command line. It should have been
nvdimm path configured in the XML.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>

Previously we were ignoring "nodeset" attribute for hugepage pages
if there was no guest NUMA topology configured in the domain XML.
Commit <fa6bdf6a> partially fixed
that issue but it introduced a somehow valid regression.

In case that there is no guest NUMA topology configured and the
"nodeset" attribute is set to "0" it was accepted and was working
properly even though it was not completely valid XML.

This patch introduces a workaround that it will ignore the nodeset="0"
only in case that there is no guest NUMA topology in order not to
hit the validation error.

After this commit the following XML configuration is valid:

  <memoryBacking>
    <hugepages>
      <page size='2048' unit='KiB' nodeset='0'/>
    </hugepages>
  </memoryBacking>

but this configuration remains invalid:

  <memoryBacking>
    <hugepages>
      <page size='2048' unit='KiB' nodeset='0'/>
      <page size='1048576' unit='KiB'/>
    </hugepages>
  </memoryBacking>

The issue with the second configuration is that it was originally
working, however changing the order of the <page> elements resolved
into using different page size for the guest.  The code is written
in a way that it expect only one page configured and always uses only
the first page in case that there is no guest NUMA topology configured.
See qemuBuildMemPathStr() function for details.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1591235Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

We can safely validate the hugepage nodeset attribute at a define time.
This validation is not done for already existing domains when the daemon
is restarted.

All the changes to the tests are necessary because we move the error
from domain start into XML parse.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

This use-case was broken by commit
<fa6bdf6a>.

We allowed this configuration and it was working as expected therefore
we can consider it as regression.  We should have never allowed such
configuration so now the best solution is in case of non-numa guest
silently ignore the 'nodeset' attribute if it's set to '0'.

That will be fixed by following patches.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

This test case is currently working but it uncovers existing issue
in our code that the generated QEMU commandline uses the default 1G
hugepage instead of the 2M hugepage specified for exact node.

The issue in our code is that for non-numa guests we take into account
only the first hugepage.  This will be fixed as invalid configuration
since it doesn't make any sense to set default and specific hugepage
for non-numa guest.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>