* src/qemu/qemu_driver.c: Allocate the TCP ports for SPICE
  before starting guest

This supports the -spice argument posted for review against
the latest upstream QEMU/KVM. This supports the bare minimum
config with port, TLS port & listen address. The x509 bits are
added in a later patch.

* src/qemu_conf.c, src/qemu_conf.h: Add SPICE flag. Check for
  -spice availability. Format -spice arg for command line
* qemuhelptest.c: Add SPICE flag
* qemuxml2argvdata/qemuxml2argv-graphics-spice.args: Add <graphics>
  for spice
* qemuxml2argvdata/qemuxml2argv-graphics-spice.xml: Add -spice arg
* qemuxml2argvtest.c: Add SPICE flag

This supports the '-vga qxl' parameter in upstream QEMU/KVM
which has SPICE support added. This isn't particularly useful
until you get the next patch for -spice support. Also note that
while the libvirt XML supports multiple video devices, this
patch only supports a single one. A later patch can add support
for 2nd, 3rd, etc PCI devices for QXL

* src/qemu/qemu_conf.h: Flag for QXL support
* src/qemu/qemu_conf.c: Probe for '-vga qxl' support and implement it
* tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c,
  tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.args,
  tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.xml: Test
  case for generating spice args with RHEL6 kvm

This adds an element

 <graphics type='spice' port='5903' tlsPort='5904' autoport='yes' listen='127.0.0.1'/>

This is the bare minimum that should be exposed in the guest
config for SPICE. Other parameters are better handled as per
host level configuration tunables

* docs/schemas/domain.rng: Define the SPICE <graphics> schema
* src/domain_conf.h, src/domain_conf.c: Add parsing and formatting
  for SPICE graphics config
* src/qemu_conf.c: Complain about unsupported graphics types

* src/qemu_conf.c: Add dummy entry in enumeration
* docs/schemas/domain.rng: Add 'qxl' as a type for the <video> tag
* src/domain_conf.c, src/domain_conf.h: Add QXL to video type
  enumerations

  To ease debugging this trivial patch allows to find what was compiled
in in the local version of libvirt, this doesn't work for remote access
but that's probably sufficient. With the patch I get on my machine:

paphio:~/libvirt/tools -> ./virsh -V
Virsh command line tool of libvirt 0.8.4
See web site at http://libvirt.org/

Compiled with support for:
 Hypervisors: Xen QEmu/KVM UML OpenVZ LXC ESX PHYP Test
 Networking: Remote Daemon Network Bridging Netcf Nwfilter
 Storage: Dir Disk Filesystem SCSI Multipath iSCSI LVM
 Miscellaneous: SELinux Secrets Debug Readline
paphio:~/libvirt/tools ->

* tools/virsh.c: add -V option
* tools/virsh.pod: document the extension

Suggested by danpb, as it's not up-to-date anymore and
lacks many functions that were added to libvirtd.

There is no point in trying to fill params beyond the first error,
because when lxcDomainGetMemoryParameters returns -1 then the caller
cannot detect which values in params are valid.

Also fix a typo in the documentation of the function.

The patch is based on the possiblity in the QEmu command line to
add -smbios options allowing to override the default values picked
by QEmu. We need to detect this first from QEmu help output.
If the domain is defined with smbios to be inherited from host
then we pass the values coming from the Host own SMBIOS, but
if the domain is defined with smbios to come from sysinfo, we
use the ones coming from the domain definition.

* src/qemu/qemu_conf.h: add the QEMUD_CMD_FLAG_SMBIOS_TYPE enum
  value
* src/qemu/qemu_conf.c: scan the help output for the smbios support,
  and if available add support based on the domain definitions,
  and host data
* tests/qemuhelptest.c: add the new enum in the outputs

Read and store the data when initializing the driver.

Move existing routines about virSysinfoDef to an util module,
add a new entry point virSysinfoRead() to read the host values
with dmidecode

* src/conf/domain_conf.c src/conf/domain_conf.h src/util/sysinfo.c
  src/util/sysinfo.h: move to a new module, add virSysinfoRead()
* src/Makefile.am: handle the new module build
* src/libvirt_private.syms: new internal symbols
* include/libvirt/virterror.h src/util/virterror.c: defined a new
  error code for that module
* po/POTFILES.in: add new file for translations

the element has a mode attribute allowing only 3 values:
  - emulate: use the smbios emulation from the hypervisor
  - host: try to use the smbios values from the node
  - sysinfo: grab the values from the <sysinfo> fields

* docs/schemas/domain.rng: extend the schemas
* src/conf/domain_conf.h: add the flag to the domain config
* src/conf/domain_conf.h: parse and serialize the smbios if present

* src/conf/domain_conf.h: defines a new internal type added to the
  domain structure
* src/conf/domain_conf.c: parsing and serialization of that new type

Currently includes a subset of the SMBIOS strings set

Now that the virsh parsing has been revamped, we can
implement qemu-monitor-command.  This is basically the same
as it was in previous iterations, but has now been tested to
work both with the plain text monitor and the QMP monitor.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

The todo.pl script had an off-by-1 which meant any category
with only a single bug would not appear

* docs/todo.pl: Fix off-by-1

During a shutdown/restart cycle libvirtd forgot the macvtap device name that it had created on behalf of a VM so that a stale macvtap device remained on the host when the VM terminated. Libvirtd has to actively tear down a macvtap device and it uses its name for identifying which device to tear down.

The solution is to not blank out the <target dev='...'/> completely, but only blank it out on VMs that are not active. So, if a VM is active, the device name makes it into the XML and is also being parsed. If a VM is not active, the device name is discarded.

libvirtd.conf uses "libvirt" as the value of "unix_sock_group",
however, group "libvirt" may not exist on the system, in this case
the case will always fail.

As a solution, replace "libvirt" with "$USER" in "tmp.conf".

virPipeReadUntilEOF is used to read the stdout of exec'ed
and this could fail to capture the full output and read only
1024 bytes.
  The problem is that this is based on a poll loop, and in the
loop we read at most 1024 bytes per file descriptor, but we also
note in the loop if poll indicates that the process won't output
more than that on that fd by setting finished[i] = 1.
  The simplest way is that if we read a full buffer make sure
finished[i] is still 0 because we will need another pass in the
loop.

* src/util/virterror.c (virErrorDomainName): Always supply
trailing space if category was present.

* src/xen/xen_driver.h (includes): Include main xen headers
here...
* src/xen/xs_internal.c (includes): ...rather than in just one of
the sub-drivers.

Commit e8066d53 broke the build with polkit0:

remote.c: In function 'remoteDispatchAuthPolkit':
remote.c:4177: error: 'rv' undeclared (first use in this function)

Add missing identifier.

The remoteIO() method has wierd calling conventions, where
it is passed a pre-allocated 'struct remote_call *' but
then free()s it itself, instead of letting the caller free().
This fixes those weird semantics

* src/remote/remote_driver.c: Sanitize semantics of remoteIO
  method wrt to memory release

The comment for the <video> tag was a cut+paste error duplicating
info about the <graphics> tag

* docs/schemas/domain.rng: Fix comment for <video> tag

A couple of places in the text monitor were overwriting the
'ret' variable with a >= 0 value before success was actually
determined. So later error paths would not correctly return
the -1 value. The drive_add code was not checking for errors
like missing command

* src/qemu/qemu_monitor_text.c: Misc error handling fixes

NFS in root squash mode may prevent opening disk images to
determine backing store. Ignore errors in this scenario.

* src/security/security_selinux.c: Ignore open failures on disk
  images

NFS does not support file labelling, so ignore this error
for stdin_path when on NFS.

* src/security/security_selinux.c: Ignore failures on labelling
  stdin_path on NFS
* src/util/storage_file.c, src/util/storage_file.h: Refine
  virStorageFileIsSharedFS() to allow it to check for a
  specific FS type.

Commit 06f81c63 attempted to make
QEMU driver ignore the failure to relabel 'stdin_path' if it was
on NFS. The actual result was that it ignores *all* failures to
label any aspect of the VM, unless stdin_path is non-NULL and
is not on NFS.

* src/qemu/qemu_driver.c: Treat all relabel failures as terminal

They only popped up during --disable-nls build. Without this configure
option, gcc wasn't able to detect them.

* src/util/util.h
* src/util/util.c
* src/libvirt_private.syms

* docs/drvqemu.html.in (qemu): Fix typo.

* src/xen/xend_internal.c (xenDaemonFormatSxpr): Hoist verify
outside of function to avoid a -Wnested-externs warning.
* src/xen/xm_internal.c (xenXMDomainConfigFormat): Likewise.
Reported by Daniel P. Berrange.

With this file in place, opening any source file in libvirt will set up
Emacs for proper indentation.

Make sure that the QEmu process within the cgroup can access the device
file for the USB device that has to be connected to the virtual domain.