A mediated device will be identified by a UUID (with 'model' now being
a mandatory <hostdev> attribute to represent the mediated device API) of
the user pre-created mediated device. We also need to make sure that if
user explicitly provides a guest address for a mdev device, the address
type will be matching the device API supported on that specific mediated
device and error out with an incorrect XML message.

The resulting device XML:
<devices>
  <hostdev mode='subsystem' type='mdev' model='vfio-pci'>
    <source>
      <address uuid='c2177883-f1bb-47f0-914d-32a22e3a8804'>
    </source>
  </hostdev>
</devices>
Signed-off-by: NErik Skultety <eskultet@redhat.com>

QEMU 2.9 introduces the pcie-root-port device, which is
a generic version of the existing ioh3420 device.

Make the new device available to libvirt users.

For NVDIMM devices it is optionally possible to specify the size
of internal storage for namespaces. Namespaces are a feature that
allows users to partition the NVDIMM for different uses.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Now that NVDIMM has found its way into libvirt, users might want
to fine tune some settings for each module separately. One such
setting is 'share=on|off' for the memory-backend-file object.
This setting - just like its name suggest already - enables
sharing the nvdimm module with other applications. Under the hood
it controls whether qemu mmaps() the file as MAP_PRIVATE or
MAP_SHARED.

Yet again, we have such config knob in domain XML, but it's just
an attribute to numa <cell/>. This does not give fine enough
tuning on per-memdevice basis so we need to have the attribute
for each device too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

NVDIMM is new type of memory introduced into QEMU 2.6. The idea
is that we have a Non-Volatile memory module that keeps the data
persistent across domain reboots.

At the domain XML level, we already have some representation of
'dimm' modules. Long story short, NVDIMM will utilize the
existing <memory/> element that lives under <devices/> by adding
a new attribute 'nvdimm' to the existing @model and introduce a
new <path/> element for <source/> while reusing other fields. The
resulting XML would appear as:

    <memory model='nvdimm'>
      <source>
        <path>/tmp/nvdimm</path>
      </source>
      <target>
        <size unit='KiB'>523264</size>
        <node>0</node>
      </target>
      <address type='dimm' slot='0'/>
    </memory>

So far, this is just a XML parser/formatter extension. QEMU
driver implementation is in the next commit.

For more info on NVDIMM visit the following web page:

    http://pmem.io/Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

bhyve supports 'gop' video device that allows clients to connect
to VMs using VNC clients. This commit adds support for that to
the bhyve driver:

 - Introducr 'gop' video device type
 - Add capabilities probing for the 'fbuf' device that's
   responsible for graphics
 - Update command builder routines to let users configure
   domain's VNC via gop graphics.
Signed-off-by: NRoman Bogorodskiy <bogorodskiy@gmail.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Add a new attribute 'rendernode' to <gl> spice element.

Give it to QEMU if qemu supports it (queued for 2.9).
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This part introduces new xml elements for file based
memorybacking support and their parsing.
(It allows vhost-user to be used without hugepages.)

New xml elements:
<memoryBacking>
  <source type="file|anonymous"/>
  <access mode="shared|private"/>
  <allocation mode="immediate|ondemand"/>
</memoryBacking>

That function sets disk->blkdeviotune sensibly.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

So far we allow to set MTU for libvirt networks. However, not all
domain interfaces have to be plugged into a libvirt network and
even if they are, they might want to have a different MTU (e.g.
for testing purposes).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This function will be needed by the QEMU driver in an upcoming
patch. Additionally, removed a useless empty line.
Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>

We need extra state variable to distinguish between autogenerated
and user defined cases after auto generation is done.

So far this function takes virDomainObjPtr which:
1) is an overkill,
2) might be not available in all the places we will use it.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Add support to read/parse the iotune group setting for qemu.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

When virt-aa-helper parses xml content it can fail on security labels.

It fails by requiring to parse active domain content on seclabels that
are not yet filled in.

Testcase with virt-aa-helper on a minimal xml:
 $ cat << EOF > /tmp/test.xml
<domain type='kvm'>
    <name>test-seclabel</name>
    <uuid>12345678-9abc-def1-2345-6789abcdef00</uuid>
    <memory unit='KiB'>1</memory>
    <os><type arch='x86_64'>hvm</type></os>
    <seclabel type='dynamic' model='apparmor' relabel='yes'/>
    <seclabel type='dynamic' model='dac' relabel='yes'/>
</domain>
EOF
 $ /usr/lib/libvirt/virt-aa-helper -d -r -p 0 \
   -u libvirt-12345678-9abc-def1-2345-6789abcdef00 < /tmp/test.xml

Current Result:
 virt-aa-helper: error: could not parse XML
 virt-aa-helper: error: could not get VM definition
Expected Result is a valid apparmor profile
Signed-off-by: NChristian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: NGuido Günther <agx@sigxcpu.org>

We already have a "scsi" hostdev subsys type, which refers to a single
LUN that is passed through to a guest.  But what of things where
multiple LUNs are passed through via a single SCSI HBA, such as with
the vhost-scsi target?  Create a new hostdev subsys type that will
carry this.
Signed-off-by: NEric Farman <farman@linux.vnet.ibm.com>

The old ivshmem is deprecated in QEMU, so let's use the better
ivshmem-{plain,doorbell} variants instead.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Just the default one now, new ones will be added in following commits.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Add support for a duration/length for the bps/iops and friends.

Modify the API in order to add the "blkdeviotune." specific definitions
for the iotune throttling duration/length options

    total_bytes_sec_max_length
    write_bytes_sec_max_length
    read_bytes_sec_max_length
    total_iops_sec_max_length
    write_iops_sec_max_length
    read_iops_sec_max_length

Since TLS was introduced hostwide for libvirt 2.3.0 and a domain
configurable haveTLS was implemented for libvirt 2.4.0, we have to
modify the migratable XML for specific case where the 'tls' attribute
is based on setting from qemu.conf.

The "tlsFromConfig" is libvirt internal attribute and is stored only in
status XML to ensure that when libvirtd is restarted this internal flag
is not lost by the restart.

That flag is used to decide whether we should put *tls* attribute to
migratable XML or not.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Add an optional "tls='yes|no'" attribute for a TCP chardev.

For QEMU, this will allow for disabling the host config setting of the
'chardev_tls' for a domain chardev channel by setting the value to "no" or
to attempt to use a host TLS environment when setting the value to "yes"
when the host config 'chardev_tls' setting is disabled, but a TLS environment
is configured via either the host config 'chardev_tls_x509_cert_dir' or
'default_tls_x509_cert_dir'
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Currently the union has only one member so remove that union.  If there
is a need to add a new type of source for new bus in the future this
will force the author to add a union and properly check bus type before
any access to union member.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Use a pointer and the virDomainChrSourceDefNew() function in order to
allocate the structure for _virDomainRedirdevDef.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Use a pointer and the virDomainChrSourceDefNew() function in order to
allocate the structure for _virDomainSmartcardDef.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

For some reason the values of memballoon model are set using an
anonymous enum, making it impossible to perform nice tricks like
demanding there are cases for all possible values in a switch. This
patch turns the anonymous enum into virDomainMemballoonModel.

Commit id '5f2a1327' should have placed the data in the host source
def structure since that's also used by smartcard, redirdev, and rng in
order to provide a backend tcp channel.  The data in the private structure
will be necessary in order to provide the secret properly.

This also renames the previous names from "Chardev" to "ChrSource" for
the private data structures and API's

Change the virDomainChrDef to use a pointer to 'source' and allocate
that pointer during virDomainChrDefNew.

This has tremendous "fallout" in the rest of the code which mainly
has to change source.$field to source->$field.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Modeled after the qemuDomainHostdevPrivatePtr (commit id '27726d8c'),
create a privateData pointer in the _virDomainChardevDef to allow storage
of private data for a hypervisor in order to at least temporarily store
secret data for usage during qemuBuildCommandLine.

NB: Since the qemu_parse_command (qemuParseCommandLine) code is not
expecting to restore the secret data, there's no need to add code
code to handle this new structure there.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

This function for some weird reason returns integer instead of
virDomainNetType type. It is important to return the correct type
so that we know what values we can expect.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Make sure that the topology results into a sane number of cpus (up to
UINT_MAX) so that it can be sanely compared to the vcpu count of the VM.

Additionally the helper added in this patch allows to fetch the total
number the topology results to so that it does not have to be
reimplemented later.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1378290

This breaks vCPU hotplug, because when starting a domain, we
create a copy of domain definition (which becomes live XML) and
during the post parse callbacks we might adjust some tunings so
that vCPU hotplug is possible.

This reverts commit c0f90799.

Certain operations may make the vcpu order information invalid. Since
the order is primarily used to ensure migration compatibility and has
basically no other user benefits, clear the order prior to certain
operations and document that it may be cleared.

All the operations that would clear the order can still be properly
executed by defining a new domain configuration rather than using the
helper APIs.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1370357

So far only guestfwd and virtio were supported. Add an additional
for Xen as libxl channels create a Xen console visible to the guest.
Signed-off-by: NJoao Martins <joao.m.martins@oracle.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

This is an internal flag that prevents our two entry points to
XML parsing (virDomainDefParse and virDomainDeviceDefParse) from
running post parse callbacks. This is expected to be used in
cases when we already have full domain/device XML and we are just
parsing it back (i.e. virDomainDefCopy or virDomainDeviceDefCopy)
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Just like virDomainDefPostParseCallback has gained new
parseOpaque argument, we need to follow the logic with
virDomainDeviceDefPostParse.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

We want to pass the proper opaque pointer instead of NULL to
virDomainDefParseString.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

We want to pass the proper opaque pointer instead of NULL to
virDomainDefParse and subsequently virDomainDefParseNode too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

We want to pass the proper opaque pointer instead of NULL to
virDomainDefParseXML and subsequently virDomainDefPostParse too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>