- 25 8月, 2014 1 次提交
-
-
由 Roman Bogorodskiy 提交于
virFDStreamOpenInternal terminates if virSetNonBlock fails. As virSetNonBlock uses gnulib's set_nonblocking_flag that sets errno, call virReportSystemError() to let user know the reason of fail.
-
- 24 8月, 2014 1 次提交
-
-
由 Eric Blake 提交于
* src/util/virbuffer.h: s/occured/occurred/ Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 23 8月, 2014 4 次提交
-
-
由 Eric Blake 提交于
Commit b606bbb4 reminded me that any time we drop locks to run back-to-back guest interaction commands, we have to check that the guest didn't disappear in between the two commands. A quick audit found a couple of spots that were missing this check. * src/qemu/qemu_driver.c (qemuDomainShutdownFlags) (qemuDomainSetVcpusFlags): Check that domain is still up. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 John Ferlan 提交于
Since '337a1362' - Coverity complains that 'net' is VIR_ALLOC()'d, but on various 'cleanup' exit paths from the code there is no corresponding cleanup.
-
由 John Ferlan 提交于
Since '1b807f92' - Coverity complains that in the error paths of both virFork() and virProcessWait() that the 'passfd' will not be closed. Added the VIR_FORCE_CLOSE(passfd) and initialized it to -1. Also noted that variable 'buf' was never really used - so I removed it
-
由 John Ferlan 提交于
Since '62f263a7' - Coverity complains if the !pidfile path is taken, then newfd1 would be leaked.
-
- 22 8月, 2014 19 次提交
-
-
由 Erik Skultety 提交于
When trying to set numatune mode directly using virsh numatune command, correct error is raised, however numatune structure was not deallocated, thus resulting in creating an empty numatune element in the guest XML, if none was present before. Running the same command aftewards results in a successful change with broken XML structure. Patch fixes the deallocation problem as well as checking for invalid attribute combination VIR_DOMAIN_NUMATUNE_PLACEMENT_AUTO + a nonempty nodeset. Resolves https://bugzilla.redhat.com/show_bug.cgi?id=1129998
-
由 Erik Skultety 提交于
The 'min_guarantee' is used by VMware ESX and OpenVZ drivers, with qemu however, libvirt should report error when starting a domain, because this element is not used. Resolves https://bugzilla.redhat.com/show_bug.cgi?id=1122455
-
由 John Ferlan 提交于
Reformat the vCPU description to use list elements rather than one long run-on paragraph Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Michal Privoznik 提交于
On some places in the libvirt code we have: f(a,z) instead of f(a, z) This trivial patch fixes couple of such occurrences. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Alexander Burluka 提交于
Wrong error code in config errors reporting was used. Fixed it.
-
由 Alexander Burluka 提交于
Libvirt measures vram in Kbytes, not in bytes, so calculation of Mbytes was incorrect. PCS server can take vram argument with units, so I added K postfix to make params a little bit clearer.
-
由 Alexander Burluka 提交于
That function caused errors in libvirtd logs when OpenStack Nova starts VM instance. Signed-off-by: NJán Tomko <jtomko@redhat.com>
-
由 Martin Kletzander 提交于
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1064770Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Li Yang 提交于
Signed-off-by: NLi Yang <liyang.fnst@cn.fujitsu.com>
-
由 Martin Kletzander 提交于
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
This eliminates the need for active waiting. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=927369Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
That sets a new flag, but that flag does mean the child will get LISTEN_FDS and LISTEN_PID environment variables properly set and passed FDs reordered so that it corresponds with LISTEN_FDS (they must start right after STDERR_FILENO). Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
Even line like this: int asdf = i - somevar; was matched by the regex, so this patch adds '=' to the list of characters that break the regexp. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
First FD is the RW unix socket to listen on, second one (if applicable) is the RO unix socket. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
It's just a wrapper around NewFD and NewUNIX that selects the right option and increments the number of used FDs. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
Since not only systemd can do this (we'll be doing it as well few patches later), change 'systemd' to 'caller' and fix LISTEN_FDS to LISTEN_PID where applicable. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
- 21 8月, 2014 5 次提交
-
-
由 Peter Krempa 提交于
When formatting the forward mode addresses or interfaces the switch was done based on the type of the network rather than of the type of the individual <interface>/<address> element. In case a user would specify an incorrect network type ("passhtrough") with <address> elements, libvirtd would crash as it would attempt to format an <interface>. Use the type of the individual element to format the XML. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1132347
-
由 Li Yang 提交于
Signed-off-by: NLi Yang <liyang.fnst@cn.fujitsu.com>
-
由 John Ferlan 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1078126 Using 'virsh attach-device --config' (or --persistent) to attach a file backed lun device will succeed; however, subsequent domain restarts will result in failure because the configuration of a file backed lun is not supported. Although allowing 'illegal configurations' is something that can be allowed, it may not be practical in this case. Generally, when attaching a device to a domain means the domain must be running. A way around this is using the --config (or --persistent) option. When an attach is done to a running domain, a temporary configuration is modified first followed by the live update. The live update will make a number of disk validity checks when building the qemu command to attach the disk. If any fail, then change is rejected. Rather than allow a potentially illegal combination, adjust the code in the configuration path to make the same checks as the running path will make with respect to disk validity checks. This way we avoid having the potential for some subsequent start/reboot to fail because an illegal combination was allowed. NB: The live path still checks the configuration since it is possible to just do --live guest modification...
-
由 Peter Krempa 提交于
The error message contains one extra dash.
-
由 Michal Privoznik 提交于
Since vbox driver rewrite the virDriver structure init moved from vbox_tmpl.c into vbox_common.c. However, our hvsupport.pl script doesn't count with that. It still parses vbox_tmp.c and looks for virDriver structure which is not found there anymore. As a result, at hvsupport page is seems like vbox driver doesn't support anything. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 20 8月, 2014 10 次提交
-
-
由 Michal Privoznik 提交于
In case the host has 2 or more NUMA nodes, we fetch CPU map for each node. However, we need to free the CPU map in between loops: ==29513== 96 (72 direct, 24 indirect) bytes in 3 blocks are definitely lost in loss record 951 of 1,264 ==29513== at 0x4C2A700: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so) ==29513== by 0x52AD24B: virAlloc (viralloc.c:144) ==29513== by 0x52AF0E6: virBitmapNew (virbitmap.c:78) ==29513== by 0x52FB720: virNumaGetNodeCPUs (virnuma.c:294) ==29513== by 0x53C700B: nodeCapsInitNUMA (nodeinfo.c:1886) ==29513== by 0x11759708: vboxCapsInit (vbox_common.c:398) ==29513== by 0x11759CC4: vboxConnectOpen (vbox_common.c:514) ==29513== by 0x53C965F: do_open (libvirt.c:1147) ==29513== by 0x53C9EBC: virConnectOpen (libvirt.c:1317) ==29513== by 0x142905: remoteDispatchConnectOpen (remote.c:1215) ==29513== by 0x126ADF: remoteDispatchConnectOpenHelper (remote_dispatch.h:2346) ==29513== by 0x5453D21: virNetServerProgramDispatchCall (virnetserverprogram.c:437) Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Peter Krempa 提交于
The "maxMemory" element was never supported by libvirt. Remove it from the test XMLs. (Found while actually trying to add support for a identically named element).
-
由 Martin Kletzander 提交于
And add a syntax-check for '){$'. It's not perfect, but better than nothing. Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Michal Privoznik 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1103245 An advice appeared there on the qemu-devel list [1]. When a domain is suspended and then resumed guest kernel is not aware of this. So we've introduced virDomainSetTime API that resets the time within guest using qemu-ga. On the other hand, qemu itself is trying to make RTC beat faster to catch the difference. But if we don't tell qemu that guest's time was reset via the other method, both mechanisms are applied resulting in again wrong guest time. In order to avoid summing both corrections we need to tell qemu that it should not use the RTC injection if the guest time is set via guest agent. 1: http://www.mail-archive.com/qemu-devel@nongnu.org/msg236435.htmlSigned-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Martin Kletzander 提交于
Partially resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1131306Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Martin Kletzander 提交于
Partially resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1131306Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Peter Krempa 提交于
The build failure is caused by a false positive of some static analysys steps done by gcc (that don't happen on -O0).
-
由 Peter Krempa 提交于
When a user would try changing the persistent IO tuning settings for a disk that was hotplugged to a vm in a transient way, the qemuDomainSetBlockIoTune API would use the same index for both the live and config disk array. The disk was missing from the config array though causing a crash of libvirtd. To fix the issue, determine the indexes separately. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1131819
-
由 Michal Privoznik 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1095636 When starting up the domain the domain's NICs are allocated. As of 1f24f682 (v1.0.6) we are able to use multiqueue feature on virtio NICs. It breaks network processing into multiple queues which can be processed in parallel by different host CPUs. The queues are, however, created by opening /dev/net/tun several times. Unfortunately, only the first FD in the row is labelled so when turning the multiqueue feature on in the guest, qemu will get AVC denial. Make sure we label all the FDs needed. Moreover, the default label of /dev/net/tun doesn't allow attaching a queue: type=AVC msg=audit(1399622478.790:893): avc: denied { attach_queue } for pid=7585 comm="qemu-kvm" scontext=system_u:system_r:svirt_t:s0:c638,c877 tcontext=system_u:system_r:virtd_t:s0-s0:c0.c1023 tclass=tun_socket And as suggested by SELinux maintainers, the tun FD should be labeled as svirt_t. Therefore, we don't need to adjust any range (as done previously by Guannan in ae368ebf) rather set the seclabel of the domain directly. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Peter Krempa 提交于
Instead of tediously copying of the disk source to remove it later ensure that the media change function removes the old device after it succeeds.
-