By using a loopback device, disks backed by plain files can
be made available to LXC containers. We make no attempt to
auto-detect format if <driver type="raw"/> is not set,
instead we unconditionally treat that as meaning raw. This
is to avoid the security issues inherent with format
auto-detection
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Minor re-factoring of code for setting up loop devices in
the LXC controller
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The current QEMU code for skipping log messages only skips over
'debug' message, switch to virLogProbablyLogMessage to make sure
it skips over all of them

Currently we rely on a VIR_ERROR message being logged by the
virRaiseError function to report LXC startup errors. This gives
the right message, but is rather ugly and can be truncated
if lots of log messages are written. Change the LXC controller
to explicitly print any virErrorPtr message to stderr. Then
change the driver to skip over anything that looks like a log
message.

The result is that this

error: Failed to start domain busy
error: internal error guest failed to start: 2013-03-04 19:46:42.846+0000: 1734: info : libvirt version: 1.0.2
2013-03-04 19:46:42.846+0000: 1734: error : virFileLoopDeviceAssociate:600 : Unable to open /root/disk.raw: No such file or directory

changes to

error: Failed to start domain busy
error: internal error guest failed to start: Unable to open /root/disk.raw: No such file or directory
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

When reading log output from QEMU/LXC we need to skip over any
libvirt log messages. Currently the QEMU driver checks for a
fixed string, but this is better done with a regex. Add a method
virLogProbablyLogMessage to do a regex check
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

In the LXC container startup code when switching stdio
streams, we call VIR_FORCE_CLOSE on all FDs. This triggers
a huge number of warnings, but we don't see them because
stdio is closed at this point. strace() however shows them
which can confuse people debugging the code. Switch to
VIR_MASS_CLOSE to avoid this
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

RHEL4 vintage libxml2 header files are missing xmlSaveToBuffer
despite the symbol existing in the binary
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The virNetDevSetupControlFull function was protected by a
conditional on SIOCBRADDBR, which is bogus since it does
not use that symbol. Update the conditionals around all
callers to do stricter checks to ensure we always build
succesfully
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The RHEL4 vintage header files do not define GET_VLAN_VID_CMD.
Conditionally define it in our source, since the kernel can
raise a runtime error if it isn't supported
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The loop.h on RHEL4 is broken and cannot be imported. We already
detect this in configure as a side-effect of looking for whether
LO_FLAGS_AUTOCLEAR is available. We protected the impl with
HAVE_DECL_LO_FLAGS_AUTOCLEAR, but not the header import
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

To avoid a clash with daemon() libc API, rename the
'daemon' param in the header file to 'binary'. The
source file already uses the name 'binary'.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

On RHEL-4 vintage one of the header files is polluted causing a
clash between the clone() syscall and the 'clone' parameter in
a libvirt driver API
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Commit 0df3e896 only touched the header, but the .c file had the
same shadowing potential.

* src/util/viralloc.c (virDeleteElementsN): s/remove/toremove/ to
match the header.

This matches the documentation of commit 4932ef45, and the
C code changes of commit 75e656a3.

* docs/schemas/domaincommon.rng: Allow default entry.

Make the same fix as in commit de53effe.

* src/util/viralloc.h (virDeleteElementsN): Cater to old glibc.

Code that validates the whitelist for the RNG device filename
didn't account for fact that filename may be NULL. This led
to a NULL reference crash. This wasn't caught since the test
suite was not covering this XML syntax
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Resolves the following valgrind error from qemuxml2argvtest:

==20393== 5 bytes in 1 blocks are definitely lost in loss record 2 of 60
==20393==    at 0x4A0883C: malloc (vg_replace_malloc.c:270)
==20393==    by 0x38D690A167: __vasprintf_chk (in /usr/lib64/libc-2.16.so)
==20393==    by 0x4CB0D97: virVasprintf (stdio2.h:210)
==20393==    by 0x4CB0E53: virAsprintf (virutil.c:2017)
==20393==    by 0x428DC5: qemuAssignDeviceAliases (qemu_command.c:791)
==20393==    by 0x41DF93: testCompareXMLToArgvHelper (qemuxml2argvtest.c:151)
==20393==    by 0x41F53F: virtTestRun (testutils.c:157)
==20393==    by 0x41DA9B: mymain (qemuxml2argvtest.c:885)
==20393==    by 0x41FB7A: virtTestMain (testutils.c:719)
==20393==    by 0x38D6821A04: (below main) (in /usr/lib64/libc-2.16.so)
==20393==

From qemu_command.c/line 791:

    if (def->rng) {
        if (virAsprintf(&def->rng->info.alias, "rng%d", 0) < 0)
            goto no_memory;
    }

This patch plugs two memory leaks, removes some useless and confusing
constructs and renames renames "cleanup" label as "error" since it is
only used for error path rather then being common for both success and
error paths.

Change the various "return -1" to "break".  Avoids Coverity error and
perhaps other/future analyzer issues.

1. The virObjectLock() call was unconditional, but Unlock was conditional
   on vm being valid.  Removed the check

2. A call to virDomainEventNewFromObj() isn't guaranteed to return an
   event - that check needs to be made prior to libxlDomainEventQueue()
   of the event. Did not add libxlDriverLock/Unlock around the call since
   some callers already have lock taken

3. Need to initialize fd = -1 in libxlDoDomainSave() since we can jump
   to cleanup before it's set.

4. Missing break;'s in libxlDomainModifyDeviceFlags() for case
   LIBXL_DEVICE_UPDATE.  The default: case would report an error

virsh subcommand memtune forgot updating domain live xml
after setting cgroup value.

A value which is equal to a integer maximum such as LLONG_MAX is
a valid integer value.

The patch fix the following error:
1, virsh memtune vm --swap-hard-limit -1
2, virsh start vm
In debug mode, it shows error like:
virScaleInteger:1813 : numerical overflow:\
                       value too large: 9007199254740991KiB

This patch adds proper error reporting if parsing of cputune parameters
fails due to incorrect values provided by the user. Previously no errors
were reported in such a case and the failure was silently ignored.

Make the iterator function usable in the next patches. Also refactor
some parts to avoid strcmp if not necessary.

This commit tweaks and shadows the change that was done in commit
babe7dad and was needed after the
support for multiple console devices was added. Historically the first
<console> element is alias for the <serial> device.

This patch changes many unrelated places to simplify the code or update
code style. This patch should not have any semantic impact on the code.

Help script creators by not having to parse the names from the table.

- configure.ac docs/news.html.in libvirt.spec.in: update for the release
- po/*.po*: merged in transifex updates for fr,hi,pl,ja,uk,it and
  regenerated

There is some controversy[1] on the qemu list on whether qemu should
have ever allowed arbitrary file name passthrough, or whether it
should be restricted to JUST /dev/random and /dev/hwrng.  It is
always easier to add support for additional filenames than it is
to remove support for something once released, so this patch
restricts libvirt 1.0.3 (where the virtio-random backend was first
supported) to just the two uncontroversial names, letting us defer
to a later date any decision on whether supporting arbitrary files
makes sense. Additionally, since qemu 1.4 does NOT support
/dev/fdset/nnn fd passthrough for the backend, limiting to just
two known names means that we don't get tempted to try fd
passthrough where it won't work.

[1]https://lists.gnu.org/archive/html/qemu-devel/2013-03/threads.html#00023

* src/conf/domain_conf.c (virDomainRNGDefParseXML): Only allow
/dev/random and /dev/hwrng.
* docs/schemas/domaincommon.rng: Flag invalid files.
* docs/formatdomain.html.in (elementsRng): Document this.
* tests/qemuxml2argvdata/qemuxml2argv-virtio-rng-random.args:
Update test to match.
* tests/qemuxml2argvdata/qemuxml2argv-virtio-rng-random.xml:
Likewise.

Added a picture and explanation describing the virConnectOpen processing
at a "higher" level, but with some source code references.

Change the order of some conditions and use the AllDomains API to get
a list of all the active and defined domains, then use the Active and
Name API's in order to print.

This changes here adjust the output from:

Attempting to connect to hypervisor
Connected to hypervisor at "qemu:///system"
Hypervisor: "QEMU" version: 0.32.656
There are 0 active and 2 inactive domains
Inactive domains:
  foo
  bar
Disconnected from hypervisor

to

Attempting to connect to hypervisor
Connected to hypervisor at "qemu:///system"
Hypervisor: "QEMU" version: 0.32.656
There are 0 active and 2 inactive domains
       foo (non-active)
       bar (non-active)
Disconnected from hypervisor

Update the function prototypes to include a message about the client needing
to free() returned name fields.  Fix the all domains example flags values.

When given a CA cert with basic constraints to set non-critical,
and key usage of 'key signing', this should be rejected. Version
of GNUTLS < 3 do not rejecte it though, so we never noticed the
test case was broken
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

19c6ad9a (qemu: Refactor qemuDomainSetMemoryParameters) introduced
a new macro, VIR_GET_LIMIT_PARAMETER(PARAM, VALUE). But if statement
in the macro is not correct and so set_XXXX flags are set to false
in the wrong. As a result, libvirt ignores all memtune parameters.
This patch fixes the conditional expression to work correctly.
Signed-off-by: NSatoru Moriya <satoru.moriya@hds.com>