In previous change:

  commit 29b51674
  Author: Jiri Denemark <jdenemar@redhat.com>
  Date:   Tue Aug 4 14:05:52 2015 +0200

    examples: Add example polkit ACL rules

The polkit examples were accidentally added to the spec inside
a %if %{with_network} conditional.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

We are using memory-backing-file even when it's not needed, for example
if user requests hugepages for memory backing, but does not specify any
pagesize or memory node pinning.  This causes migrations to fail when
migrating from older libvirt that did not do this.  So similarly to
commit 7832fac8 which does it for
memory-backend-ram, this commit makes is more generic and
backend-agnostic, so the backend is not used if there is no specific
pagesize of hugepages requested, no nodeset the memory node should be
bound to, no memory access change required, and so on.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1266856Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

So since the introduction of the memory-backend-file object until now we
only added '-mem-path' for non-NUMA guests and we used the parameters of
the memory-backend-file object to specify the path to the hugetlbfs
mount.  But hugepages can be also used without memory-backend-file
object, as it used to be before its introduction.  Let's just get this
part of the code back and properly append the '-mem-path' for NUMA
guests as well, but only when the memory backend is not needed.

This parameter is already being applied when no numa is requested and
because we still use memory-object-file unconditionally for
hugepage-backed NUMA guests, this should not fire until later.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

That function is called qemuBuildMemPathStr() and will be used in
other places in the future.  The change in the test suite is proper due
to the fact that -mem-prealloc makes only sense with -mem-path (from
qemu documentation -- html/qemu-doc.html).
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

To get rid of very long line and make it more readable.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

These tests make sure that we can use this option only when the capability is
set.
Signed-off-by: NPavel Fedin <p.fedin@samsung.com>

Support for GICv3 has been recently introduced in qemu using gic-version
option for the 'virt' machine. The option can actually take values of
'2', '3' and 'host', however, since in libvirt this is a numeric
parameter, we limit it only to 2 and 3. Value of 2 is not added to the
command line in order to keep backward compatibility with older qemu
versions.
Signed-off-by: NPavel Fedin <p.fedin@samsung.com>

Unfortunately qemu currently doesn't offer introspection for machine types,
so we have to rely on version number, similar to QEMU_CAPS_MACHINE_USB_OPT.
Signed-off-by: NPavel Fedin <p.fedin@samsung.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

* docs/news.html.in libvirt.spec.in: update for new release
* po/*.po*: regenerate localization

Commit 307fb904 (Sep 10) added a 'privileged' variable when creating
the DAC driver:

@@ -153,6 +157,7 @@ virSecurityManagerNewDAC(const char *virtDriver,
                          bool defaultConfined,
                          bool requireConfined,
                          bool dynamicOwnership,
+                         bool privileged,
                          virSecurityManagerDACChownCallback chownCallback)

But argument order is mixed up at the caller, swapping dynamicOwnership
and privileged values. This corrects the argument order

https://bugzilla.redhat.com/show_bug.cgi?id=1266628

https://bugzilla.redhat.com/show_bug.cgi?id=1250331

Even after my rework of startupPolicy handling, one command
slipped my attention. The change-media command has a very unique
approach to constructing disk XML. However, it will not preserve
startupPolicy attribute.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Since the previous commit, the shallow copy is only used inside
the if (backend->buildVol) if.

Since commit e0139e30, we update the pool allocation with
the user-provided allocation values.

For qcow2, the allocation is ignored for volume building,
but we still subtracted it from pool's allocation.
This can result in interesting values if the user-provided
allocation is large enough:

Capacity:       104.71 GiB
Allocation:     109.13 GiB
Available:      16.00 EiB

We already do a VolRefresh on volume creation. Also refresh
the volume after creating and use the new value to update the pool.

https://bugzilla.redhat.com/show_bug.cgi?id=1163091

Commit id '7383b8cc' changed virDomainDef 'virtType' to an enum, that
caused a build failure on some archs due to comparing an unsigned value
to < 0.  Adjust the fetch of 'type' to be into temporary 'int virtType'
and then assign that virtType to the def->virtType

Earlier virtType was of type int. After, introducing the enum VIR_DOMAIN_VIRT_NONE,
the type of virtType is modified to virDomainVirtType.

Introduce VIR_DOMAIN_VIRT_NONE to give domaintype the default value of zero.
This is specially helpful in constructing better error messages
when we don't want to look up the default emulator by virtType.

The test data in vircapstest.c is also modified to reflect this change.

otherwise messages end up in /var/log/kern.log if journald forwards to
syslog.

Reference: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=799633

So, our mingw build is broken. It's because while libvirt_shell
library is using some of our internal APIs, e.g. virStrndup, and
readline API but it's not being linked with nor libvirt.la nor
libreadline.  Only subsequent users of the library, like virsh,
do link to the needed libraries. In fact, I'm surprised Linux
linker doesn't care, because how can it make a static library
with missing symbols is mystery to me.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

As of commit 69929941, we set graphics/@listen attribute according to the
first listen child element even if that element is of type='network'.
This was done for backward compatibility with applications which only
support the original listen attribute. However, by doing so we broke
migration to older libvirt which tried to check that the listen
attribute matches one of the listen child elements but which did not
take type='network' elements into account.

We are not concerned about compatibility with old applications when
formatting domain XML for migration for two reasons. The XML is consumed
only by libvirtd and the IP address associated with type='network'
listen address on the source host is just useless on the destination
host. Thus, we can safely avoid propagating the type='network' IP
address to graphics/@listen attribute when creating migratable XML.

https://bugzilla.redhat.com/show_bug.cgi?id=1265111Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Instead of referencing vsh sources in all relevant client targets,
create a library that the client can link against.

This seemed to be more of a false positive as for some reason Coverity
was missing the "ret < 0" goto error condition and somehow believing that
event could be overwritten.  At first I thought it was just the ret != 0
condition difference, but it wasn't.

In any case, make use of the recent change to qemuDomainEventQueue to
check event == NULL and just pass it as a parameter directly in the
error path. That avoids the error.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

As it turns out, ret can only be 0 or -1, so rather than have some comparisons
be "ret < 0" and others be "ret != 0", make them all "ret < 0".

Coverity complains that return from virHookCall is not checked in
one place in qemuProcessStop.  Since the comment notes that we cannot
stop the operation even it if fails, just added the ignore_value.

Use 'dead_error_condition' instead of 'dead_error_begin'

The cleanup path did not clear the reference for sk1 and sk2
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

In the error path need to unref the 'caps' as well
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

So while working on my previous patches, I've noticed that
virDomainRestore implementation in qemu and test drivers has the
same problem as I am fixing.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

So far we have the following pattern occurring over and over
again:

  if (!vm->persistent)
      qemuDomainRemoveInactive(driver, vm);

It's safe to put the check into the function and save some LoC.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=871452

So, you want to create a domain from XML. The domain already
exists in libvirt's database of domains. It's okay, because name
and UUID matches. However, on domain startup, internal
representation of the domain is overwritten with your XML even
though we claim that the XML you've provided is a transient one.
The bug is to be found across nearly all the drivers.
Le sigh.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=871452

Okay, so we allow users to 'virsh create' an already existing
domain, providing completely different XML than the one stored in
Libvirt. Well, as long as name and UUID matches. However, in some
drivers the code that handles errors unconditionally removes the
domain that failed to start even though the domain might have
been persistent. Fortunately, the domain is removed just from the
internal list of domains and the config file is kept around.

Steps to reproduce:

1) virsh dumpxml $dom > /tmp/dom.xml
2) change XML so that it is still parse-able but won't boot, e.g.
change guest agent path to /foo/bar
3) virsh create /tmp/dom.xml
4) virsh dumpxml $dom
5) Observe "No such domain" error
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

As announced on the list [1], Cherrypop is a management
application based on libvirt. It's a decentralized cloud software
with nice scaling ability.

1: https://www.redhat.com/archives/libvir-list/2015-September/msg00670.htmlSigned-off-by: NMichal Privoznik <mprivozn@redhat.com>

I initially added this in order to keep the code more error-prone to
following additions, but it seems it's still frowned upon.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Now that virQEMUDriverCreateXMLConf is never called with NULL
(after 086f37e9) we can safely drop useless check in
qemuDomainDeviceDefPostParse as we are guaranteed to be always
called with the driver initialized. Therefore checking if driver
is NULL makes no sense. Moreover, if we mix it with direct driver
dereference. And after that, we are sure that nor @cfg will be
NULL, therefore we can drop checks for that too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Although 0 length block jobs aren't entirely useful, the output of virsh
blockjob is empty due to the condition that suppresses the output for
migration jobs that did not start. Since the only place that actually
uses the condition that suppresses the output is in migration, let's
move the check there and thus add support for 0 of 0 equaling to 100%.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1196711

Qemu unfortunately doesn't update internal state right after migration
and so the actual balloon size as returned by 'query-balloon' are
invalid for a while after the CPUs are started after migration. If we'd
refresh our internal state at this point we would report invalid current
memory size until the next balloon event would arrive.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1242940